Compressive Failure of Fiber Composites under Multi-Axial Loading

Abstract This paper examines the compressive strength of a fiber reinforced lamina under multi-axial stress states. An equilibrium analysis is carried out in which a kinked band of rotated fibers, described by two angles, is sandwiched between two regions in which the fibers are nominally straight. Proportional multi-axial stress states are examined. The analysis includes the possibility of bifurcation from the current equilibrium state. The compressive strength of the lamina is contingent upon either attaining a load maximum in the equilibrium response or satisfaction of a bifurcation condition, whichever occurs first. The results show that for uniaxial loading a non-zero kink band angle β produces the minimum limit load. For multi-axial loading, different proportional loading paths show regimes of bifurcation dominated and limit load dominated behavior. The present results are able to capture the beneficial effect of transverse compression in raising the composite compressive strength as observed in experiments.

[1]  R. Hill.  The mathematical theory of plasticity , 1950 .

[2]  Carl T. Herakovich,et al.  Mechanics of Fibrous Composites , 1997 .

[3]  Rajesh Kumar,et al.  Compressive strength of unidirectional composites: evaluation and comparison of prediction models , 1999 .

[4]  Z. Hashin,et al.  The Elastic Moduli of Fiber-Reinforced Materials , 1964 .

[5]  S. Kyriakides,et al.  Initiation and axial propagation of kink bands in fiber composites , 1997 .

[6]  N. Fleck,et al.  Prediction of Kink Width in Compressed Fiber Composites , 1995 .

[7]  Z. Bažant,et al.  Scaling theory for quasibrittle structural failure. , 2004, Proceedings of the National Academy of Sciences of the United States of America.

[8]  B. W. Rosen,et al.  Mechanics of composite strengthening. , 1965 .

[9]  A. Wronski,et al.  Axial compressive failure of glass-fibre polyester composites under superposed hydrostatic pressure: influence of fibre bundle size , 1992 .

[10]  I. Beyerlein,et al.  The development of compression damage zones in fibrous composites , 2001 .

[11]  P. D. Soden,et al.  Evaluation of failure prediction in composite laminates: background to ‘part B’ of the exercise , 2002 .

[12]  Stelios Kyriakides,et al.  On the compressive failure of fiber reinforced composites , 1995 .

[13]  R. Christensen.  Compressive failure of composites using a matrix-controlled failure criterion with the kink band mechanism , 2000 .

[14]  Z. Hashin.  Failure Criteria for Unidirectional Fiber Composites , 1980 .

[15]  C. Sun,et al.  Compressive strength of unidirectional fiber composites with matrix non-linearity , 1994 .

[16]  L. Schadler,et al.  Mechanisms of kink-band formation in graphite/epoxy composites , 1999 .

[17]  Norman A. Fleck,et al.  Compressive Failure of Fiber Composites , 1997 .

[18]  Zdeněk P. Bažant,et al.  Size effect on compression strength of fiber composites failing by kink band propagation , 1999 .

[19]  Y. Weitsman,et al.  A mechanics model for the compressive response of fiber reinforced composites , 1994 .

[20]  R. Chaudhuri,et al.  Stress Singularity due to Kink Band Weakening a Unidirectional Composite under Compression , 1996 .

[21]  Ramesh Talreja,et al.  Modeling of compressive failure in fiber reinforced composites , 2000 .

[22]  P. D. Soden,et al.  Predicting failure in composite laminates: the background to the exercise , 1998 .

[23]  R. Christensen,et al.  The Kink Band Mechanism for the Compressive Failure of Fiber Composite Materials , 1997 .

[24]  S. Kyriakides,et al.  Composite failure under combined compression and shear , 2000 .

[25]  S. Kyriakides,et al.  On the axial propagation of kink bands in fiber composites : Part ii analysis , 1999 .

[26]  N. Fleck,et al.  Compressive Failure of Fiber Composites: The Roles of Multiaxial Loading and Creep , 1993 .

[27]  S. Swanson,et al.  A model for compressive mean stress effects in compression failure of carbon/epoxy composites , 1996 .

[28]  G. Ravichandran,et al.  Failure Mode Transition in Unidirectional E-Glass/Vinylester Composites under Multiaxial Compression , 2000 .

[29]  J. G. Williams,et al.  Deformation of a carbon-epoxy composite under hydrostatic pressure , 1975 .

[30]  F. Chang,et al.  A Progressive Damage Model for Laminated Composites Containing Stress Concentrations , 1987 .

[31]  R Ambur Damodar,et al.  Analytical Prediction of Damage Growth in Notched Composite Panels Loaded in Axial Compression , 1999 .

[32]  Norman A. Fleck,et al.  Compressive failure of fibre composites , 1993 .

[33]  Henrik Myhre Jensen,et al.  Residual stress effects on the compressive strength of uni-directional fibre composites , 2002 .

[34]  A mechanism based modeling approach to failure in fiber reinforced composites , 2003 .

[35]  C. Dávila,et al.  Analytical prediction of damage growth in notched composite panels loaded in compression , 2000 .

[36]  Fu-Kuo Chang,et al.  Damage Tolerance of Laminated Composites Containing an Open Hole and Subjected to Compressive Loadings: Part I—Analysis , 1991 .

[37]  J. Merodio,et al.  Material instabilities in fiber-reinforced nonlinearly elastic solids under plane deformation , 2002 .

[38]  Richard Schapery,et al.  Prediction of compressive strength and kink bands in composites using a work potential , 1995 .

[39]  Venkatesh Agaram,et al.  Compressive response and failure of braided textile composites: Part 1—experiments , 2004 .

[40]  Steven Huybrechts,et al.  Analysis and behavior of grid structures , 1996 .

[41]  A. Waas,et al.  A failure criterion for fiber reinforced polymer composites under combined compression–torsion loading , 2003 .

[42]  Anthony M. Waas,et al.  Compressive failure of composites, part I: Testing and micromechanical theories , 1996 .

[43]  Anthony M. Waas,et al.  Compressive failure of composites, part II: Experimental studies , 1996 .

[44]  A. S. Argon,et al.  Fracture of Composites , 1972 .

[45]  S. Phoenix,et al.  Compressive failure model for fiber composites by kink band initiation from obliquely aligned, shear-dislocated fiber breaks , 2005 .

[46]  Paul S. Steif,et al.  A model for kinking in fiber composites—I. Fiber breakage via micro-buckling , 1990 .

[47]  P. D. Soden,et al.  Lamina properties, lay-up configurations and loading conditions for a range of fibre-reinforced composite laminates , 1998 .

[48]  Paul S. Steif,et al.  A model for kinking in fiber composites—II. Kink band formation , 1990 .

[49]  Stephen R. Swanson,et al.  A Micro-Mechanics Model for In-Situ Compression Strength of Fiber Composite Laminates , 1992 .