论文信息 - Latching in a MEMS shock sensor: Modeling and experiments - 字舞流文

Latching in a MEMS shock sensor: Modeling and experiments

Miao Yu | Luke J. Currano | Balakumar Balachandran | B. Balachandran | Miao Yu | L. Currano

[1] Y. Loke,et al. Fabrication and characterization of silicon micromachined threshold accelerometers , 1991 .

[2] D. Ciarlo,et al. A latching accelerometer fabricated by the anisotropic etching of (110) oriented silicon wafers , 1992 .

[3] Khalil Najafi,et al. A wide-range micromachined threshold accelerometer array and interface circuit , 2001 .

[4] Michael Kranz,et al. Latching shock sensors for health monitoring and quality control , 2005, SPIE MOEMS-MEMS.

[5] Guifu Ding,et al. Design, simulation and characterization of an inertia micro-switch fabricated by non-silicon surface micromachining , 2007 .

[6] Alberto Corigliano,et al. Multi-scale Analysis of MEMS Sensors Subject to Drop Impacts , 2007, Sensors.

[7] Yuelin Wang,et al. Micro-cantilever shocking-acceleration switches with threshold adjusting and 'on'-state latching functions , 2007 .

[8] Stephen M. Schultz,et al. Plastic latching accelerometer based on bistable compliant mechanisms , 2007 .

[9] Quang Su,et al. Characterization of the performance of capacitive switches activated by mechanical shock , 2007, Journal of micromechanics and microengineering : structures, devices, and systems.

[10] Miao Yu,et al. Latching ultra-low power MEMS shock sensors for acceleration monitoring , 2008 .