Flexural Lateral Load Distribution Characteristics of Sandwich Plate System Bridges: Parametric Investigation

The sandwich plate system (SPS) is a relatively new bridge deck system that consists of steel face plates bonded to a rigid polyurethane core. The decks are thin, lightweight, and modular in design and can be tailored to numerous applications. This system provides an excellent alternative for the rapid construction and rehabilitation of bridge decks. With any new system, there exists some uncertainty in the design procedures as a result of the limited population for comparison. This paper presents the results of a finite-element parametric investigation of the lateral load distribution characteristics of SPS bridges. The parametric study primarily focuses on the influence of deck thickness on distribution behavior as compared to conventional reinforced concrete decks. Results from the study demonstrate that the inherent flexibility of a thin SPS deck yields larger distribution factors (up to 20%) than a typical reinforced concrete deck, but these distribution factors can still be conservatively estimated with current AASHTO LRFD methods. Additional comparisons indicate that the distribution behavior of SPS bridges can also be estimated with the equations proposed by the NCHRP 12-62 project.

[1]  Elisa D. Sotelino,et al.  Simplified Live Load Distribution Factor Equation for Steel Girder Bridges , 2004 .

[2]  Elisa D. Sotelino,et al.  Influence of Secondary Elements and Deck Cracking on the Lateral Load Distribution of Steel Girder Bridges , 2006 .

[3]  Devin K. Harris.  Lateral Load Distribution and Deck Design Recommendations for the Sandwich Plate System (SPS) in Bridge Applications , 2007 .

[4]  Antonio Nanni,et al.  Assessment of Load Transfer and Load Distribution in Bridges Utilizing FRP Panels , 2007 .

[5]  Benjamin A. Graybeal,et al.  Structural Behavior of Ultra-High Performance Concrete Prestressed I-Girders , 2006 .

[6]  Christopher J. Earls,et al.  EVALUATION OF EFFECTIVE WIDTH AND DISTRIBUTION FACTORS FOR GFRP BRIDGE DECKS SUPPORTED ON STEEL GIRDERS , 2006 .

[7]  Roy A. Imbsen,et al.  DISTRIBUTION OF WHEEL LOADS ON HIGHWAY BRIDGES , 1990 .

[8]  Paul J. Barr,et al.  LIVE-LOAD DISTRIBUTION FACTORS IN PRESTRESSED CONCRETE GIRDER BRIDGES , 2001 .

[9]  J. Vinson.  The Behavior of Sandwich Structures of Isotropic and Composite Materials , 1999 .

[10]  Jose P Gomez,et al.  Demonstration of Use of High-Performance Lightweight Concrete in Bridge Superstructure in Virginia , 2005 .

[11]  J. M. Stallings,et al.  Tests and Ratings of Short‐Span Steel Bridges , 1993 .

[12]  Robert E. Miller.  Reduction of the error in eccentric beam modelling , 1980 .

[13]  Andrzej S. Nowak,et al.  Effects of Edge-Stiffening Elements and Diaphragms on Bridge Resistance and Load Distribution , 2002 .

[14]  P. Qiao,et al.  A systematic analysis and design approach for single-span FRP deck/stringer bridges , 2000 .

[15]  Julio F. Davalos,et al.  DEVELOPMENT OF AN EFFICIENT CONNECTOR SYSTEM FOR FIBER REINFORCED POLYMER BRIDGE DECKS TO STEEL GIRDERS , 2004 .

[16]  Robert G. Driver,et al.  Characterization of fatigue properties of ASTM A709 high performance steel , 2007 .

[17]  Carin L. Roberts-Wollmann,et al.  Strength and Performance of Fiber-Reinforced Concrete Composite Slabs , 2004 .

[18]  Devin K. Harris,et al.  Field Investigation of a Sandwich Plate System Bridge Deck , 2008 .

[19]  Thomas Domagalski,et al.  Full-Scale Testing of Prefabricated Full-Depth Precast Concrete Bridge Deck Panel System , 2007 .

[20]  Elisa D. Sotelino,et al.  Three-dimensional finite element modeling of composite girder bridges , 2006 .

[21]  Andrzej S. Nowak,et al.  Live Load Distribution for Steel Girder Bridges , 2001 .

[22]  Toorak Zokaie.  AASHTO-LRFD Live Load Distribution Specifications , 2000 .

[23]  E. Ventsel,et al.  Thin Plates and Shells: Theory: Analysis, and Applications , 2001 .

[24]  William B. Stiller,et al.  Testing, Analysis, and Evaluation of a GFRP Deck on Steel Girders , 2006 .

[25]  R A Dorton,et al.  The Sandwich Plate System For Bridge Decks , 2002 .

[26]  Jay L. Devore,et al.  Probability and statistics for engineering and the sciences , 1982 .