Processing of Co-Base/C-Nanotubes Compound Coatings on D2 Steel Using Plasma Transferred by Arc: Tribological and Mechanical Performance

[1]  Y. Z. Zhou,et al.  Effect of temperature on the tensile deformation behavior and fracture mechanism of a transient liquid-phase bonding joint of γ′-strengthened Co-based single-crystal superalloy , 2022, Journal of Materials Science.

[2]  Y. Liu,et al.  Tribological properties and self-lubrication mechanism of in-situ grown graphene reinforced nickel matrix composites in ambient air , 2022, Wear.

[3]  F. Luo,et al.  Effect of tungsten carbide content on the tribological behavior of TiB2–TiC-based cermets , 2022, Wear.

[4]  S. Hong,et al.  Mechanical and wear properties of SiCp/CNT/Al6061 hybrid metal matrix composites , 2022, Diamond and Related Materials.

[5]  Ruyi Gou,et al.  PCD after cobalt leaching reinforced by high temperature annealing: Tribological properties and graphitization evolution , 2022, Diamond and Related Materials.

[6]  B. Beake.  The influence of the H/E ratio on wear resistance of coating systems – Insights from small-scale testing , 2022, Surface and Coatings Technology.

[7]  Dalbir Singh,et al.  Tribological Properties of Carbon Nanotube and Carbon Nanofiber Blended Polyvinylidene Fluoride Sheets Laminated on Steel Substrates , 2022, International Journal of Chemical Engineering.

[8]  Francesco Marra,et al.  WC-Ti Coatings Deposited Via Cold Gas Spray and Modified by Laser and Furnace Heat Treatments , 2021, Journal of Thermal Spray Technology.

[9]  Han-Yu Wu,et al.  A comparative study of tungsten carbide and carbon nanotubes reinforced Inconel 625 composite coatings fabricated by laser cladding , 2021 .

[10]  Dan Liu,et al.  Anti-oxidation mechanism and interfacial chemistry of BN@CaCO3-SiO2 microcapsule-added sodium borate melt on the sliding steel surfaces at elevated temperatures , 2021, Applied Surface Science.

[11]  A. Jorio,et al.  Raman spectroscopy for carbon nanotube applications , 2021 .

[12]  Shaikh Asad Ali Dilawary,et al.  Room and High Temperature Sliding Wear Characteristics of Laser Surface Melted Stellite 6 and Mo-Alloyed Stellite 6 Hardfacings , 2021, Journal of Materials Engineering and Performance.

[13]  A. I. Mtz-Enríquez,et al.  Wear resistance of graphenic-nickel composite coating on austenitic stainless steel , 2020 .

[14]  C. Bartuli,et al.  Tribological and high-temperature mechanical characterization of cold sprayed and PTA-deposited Stellite coatings , 2019, Surface and Coatings Technology.

[15]  Zahed Allahyari,et al.  Computational discovery of hard and superhard materials , 2019, Journal of Applied Physics.

[16]  A. I. Mtz-Enríquez,et al.  Growth of a graphenic-Co composite coating on type-304 stainless steel , 2019, Vacuum.

[17]  Hongyu Liang,et al.  Fabrication of ternary hybrid of carbon nanotubes/graphene oxide/MoS2 and its enhancement on the tribological properties of epoxy composite coatings , 2018, Composites Part A: Applied Science and Manufacturing.

[18]  Bao Wang,et al.  Tribological properties of copper matrix composites reinforced with homogeneously dispersed graphene nanosheets , 2018, Journal of Materials Science & Technology.

[19]  A. Colella,et al.  Effects of Post-spray Heat Treatment on Hardness and Wear Properties of Ti-WC High-Pressure Cold Spray Coatings , 2018, Journal of Thermal Spray Technology.

[20]  M. Alvarez-Vera,et al.  Cobalt-based PTA coatings, effects of addition of TiC nanoparticles , 2017 .

[21]  Guoqing Chen,et al.  Microstructure transformation and crack sensitivity of WC-Co/steel joint welded by electron beam , 2017 .

[22]  A. P. Tschiptschin,et al.  Scratch test of active screen low temperature plasma nitrided AISI 410 martensitic stainless steel , 2017 .

[23]  Shuqin Song,et al.  Enhanced corrosion and wear resistances by graphene oxide coating on the surface of Mg-Zn-Ca alloy , 2016 .

[24]  S. Zafar,et al.  Microstructure and wear performance of heat treated WC-12Co microwave clad , 2016 .

[25]  D. Litvinov,et al.  Identification of Cobalt Oxides with Raman Scattering and Fourier Transform Infrared Spectroscopy , 2016 .

[26]  P. Menezes,et al.  Mechanical and tribological properties of self-lubricating metal matrix nanocomposites reinforced by carbon nanotubes (CNTs) and graphene – A review , 2015 .

[27]  Md. Eaqub Ali,et al.  Carbon Nanotubes Characterization by X-ray Powder Diffraction – A Review , 2014 .

[28]  M. Belmonte,et al.  Robust and wear resistant in-situ carbon nanotube/Si3N4 nanocomposites with a high loading of nanotubes , 2014 .

[29]  Kyu C. Cho,et al.  On the superposition of strengthening mechanisms in dispersion strengthened alloys and metal-matrix nanocomposites: Considerations of stress and energy , 2014, Metals and Materials International.

[30]  A. McDonald,et al.  Development of WC-based metal matrix composite coatings using low-pressure cold gas dynamic spraying , 2013 .

[31]  I. Hussainova,et al.  Advanced chromium carbide-based hardfacings , 2012 .

[32]  R. Lupoi,et al.  Hardfacing steel with nanostructured coatings of Stellite-6 by supersonic laser deposition , 2012, Light: Science & Applications.

[33]  M. Pellizzari,et al.  Effect of sliding speed and contact pressure on the oxidative wear of austempered ductile iron , 2011 .

[34]  J. Nagy,et al.  Synthesis Methods of Carbon Nanotubes and Related Materials , 2010, Materials.

[35]  S. R. Bakshi,et al.  Carbon nanotube reinforced metal matrix composites - a review , 2010 .

[36]  C. Shu,et al.  Thermal decomposition of carbon nanotube/Al2O3 powders by DSC testing , 2008 .

[37]  R. Tenne,et al.  Fabrication of self-lubricating cobalt coatings on metal surfaces , 2007 .

[38]  M. Dresselhaus,et al.  Resonance Raman spectroscopy in one-dimensional carbon materials. , 2006, Anais da Academia Brasileira de Ciencias.

[39]  T. Belin,et al.  Characterization methods of carbon nanotubes : a review. , 2005 .

[40]  T. Nguyen,et al.  Monodisperse carbon nanopearls in a foam-like arrangement: a new carbon nano-compound for cold cathodes , 2004 .

[41]  Q. X. Jia,et al.  Ultralong single-wall carbon nanotubes , 2004, Nature materials.

[42]  Ana M. Benito,et al.  Production of carbon nanotubes: the light approach , 2002 .

[43]  Eklund,et al.  Solution properties of single-walled carbon nanotubes , 1998, Science.

[44]  C. S. Bhatia,et al.  Nanoindentation and nanoscratching of hard carbon coatings for magnetic disks , 1995 .

[45]  S. Iijima.  Helical microtubules of graphitic carbon , 1991, Nature.

[46]  Warren C. Oliver,et al.  A new method for analyzing data from continuous depth-sensing microindentation tests , 1990 .

[47]  M. Dresselhaus,et al.  Graphite fibers and filaments , 1988 .

[48]  F. Wei,et al.  Carbon nanotube- and graphene-based nanomaterials and applications in high-voltage supercapacitor: A review , 2019, Carbon.

[49]  M. Castro-Román,et al.  304 stainless steel brazing incorporating tungsten nanoparticles , 2015 .

[50]  F. Freire,et al.  Multiwalled carbon nanotubes decorated with cobalt oxide nanoparticles , 2012 .

[51]  A. Cherepanov,et al.  Simulation of Thermophysical Processes at Laser Welding of Alloys Containing Refractory Nanoparticles , 2012 .

[52]  A. Al-Warthan,et al.  Carbon nanotubes, science and technology part (I) structure, synthesis and characterisation , 2012 .

[53]  D. Bueno-Baqués,et al.  Preparation of hcp and fcc Ni and Ni/NiO nanoparticles using a citric acid assisted pechini-type method , 2011 .

[54]  V Balasubramanian,et al.  Application of Response Surface Methodolody to Prediction of Dilution in Plasma Transferred Arc Hardfacing of Stainless Steel on Carbon Steel , 2009 .

[55]  J. Nagy,et al.  Carbon Nanotubes Formation in the Arc Discharge Process , 2001 .