Enhanced the bonding reliability of titanium alloy and CFRTP via interfacial multiple modification: Synergy of physical interlocking and chemical interaction

[1]  Bo Chen,et al.  Enhanced interfacial bonding strength of laser bonded titanium alloy/CFRTP joint via hydrogen bonds interaction , 2022, Composites Part B: Engineering.

[2]  M. Gude,et al.  Development of a rivet geometry for solid self-piercing riveting of thermally loaded CFRP-metal joints in automotive construction , 2022, Composite Structures.

[3]  Ruyu Tian,et al.  Effects of laser hybrid interfacial pretreatment on enhancing the carbon fiber reinforced thermosetting composites and TC4 alloy heterogeneous joint , 2022, Materials Today Communications.

[4]  Liqun Li,et al.  Influence of laser welding power on steel/CFRP lap joint fracture behaviors , 2022, Composite Structures.

[5]  Effect of bond end shape on CFRP / steel joint strength , 2022, Composite Structures.

[6]  Zhenmin Wang,et al.  Femtosecond laser fabricated micro/nano interfacial structures to strengthen CFRPEEK/A6061-T6 FLJ hybrid joints , 2021, Composites Part B: Engineering.

[7]  Liqun Li,et al.  Laser-induced dynamic wetting behavior and interfacial evolution of AlSi5 alloy on Ti6Al4V alloy , 2021, Applied Surface Science.

[8]  Bo Chen,et al.  Nanosecond laser ablation for improving the strength of CFRTP and aluminum alloy adhesively bonded joints , 2021 .

[9]  A. Paoletti,et al.  Prediction of the power supplied in friction-based joining process of metal-polymer hybrids through machine learning , 2021, Journal of Manufacturing Processes.

[10]  Zhenmin Wang,et al.  Enhancing Interfacial Reliability of Metal-Thermoplastic Hybrid Joints via Adding Carbon Fiber and Adjusting Welding Heat Input. , 2021, ACS applied materials & interfaces.

[11]  L. Sheng,et al.  Carbon fiber reinforced thermoplastic composites and TC4 alloy laser assisted joining with the metal surface laser plastic-covered method , 2021 .

[12]  Bo Chen,et al.  Effect of laser texturing on mechanical strength and microstructural properties of hot-pressing joining of carbon fiber reinforced plastic to Ti6Al4V , 2021 .

[13]  Zhenmin Wang,et al.  Adhesion enhancement of PEEK/6161-T6 FLJ joints via laser surface modification , 2021, Composites Part B: Engineering.

[14]  Francesco Lambiase,et al.  Friction-based processes for hybrid multi-material joining , 2021 .

[15]  F. Kimura,et al.  Chemical interaction at the interface of metal–plastic direct joints fabricated via injection molded direct joining , 2021 .

[16]  Bo Chen,et al.  Laser joining of CFRTP to titanium alloy via laser surface texturing , 2020 .

[17]  Kristine Munk Jespersen,et al.  Effect of the interfacial nanostructure on the interlaminar fracture toughness and damage mechanisms of directly bonded carbon fiber reinforced thermoplastics and aluminum , 2020 .

[18]  Bo Chen,et al.  Effect of scanning speed on laser joining of carbon fiber reinforced PEEK to titanium alloy , 2020 .

[19]  Bo Chen,et al.  Influence of defocus distance on laser joining of CFRP to titanium alloy , 2020 .

[20]  Wang Jing,et al.  A facile process to fabricate metal coating on PET sheet: Preparation of highly active polymer brush/Ag particle and its application in electroless copper plating , 2020 .

[21]  Gang Liu,et al.  Effect of laser heat input on the interface morphology during laser joining of CFRTP and 6061 aluminum alloy , 2020 .

[22]  Xiping Li,et al.  Improving the strength of injection molded aluminum/polyphenylene sulfide lap joints dependence on surface microstructure and composition , 2019, Materials & Design.

[23]  Wenwu Zhang,et al.  Laser direct joining of CFRTP and aluminium alloy with a hybrid surface pre-treating method , 2019, Composites Part B: Engineering.

[24]  Yan-bin Chen,et al.  Joint formation and fracture characteristics of laser welded CFRP/TC4 joints , 2019, Journal of Manufacturing Processes.

[25]  J. Kim,et al.  Interfacial structure and bonding mechanism of AZ31/carbon-fiber-reinforced plastic composites fabricated by thermal laser joining , 2019, Composites Part B: Engineering.

[26]  Tianxi Liu,et al.  Lightweight, strong, and super-thermal insulating polyimide composite aerogels under high temperature , 2019, Composites Science and Technology.

[27]  J. Kim,et al.  Hot metal pressing joining of carbon fiber reinforced plastic to AZ31 Mg alloy and the effect of the oxide surface layer on joint strength , 2017, Applied Surface Science.

[28]  S. Genna,et al.  Laser assisted joining of AA5053 aluminum alloy with polyvinyl chloride (PVC) , 2018, Optics & Laser Technology.

[29]  J. Kim,et al.  Effect of resin matrix on the strength of an AZ31 Mg alloy-CFRP joint made by the hot metal pressing technique , 2018, Composite Structures.

[30]  A. Paoletti,et al.  Friction Assisted Joining of titanium and polyetheretherketone (PEEK) sheets , 2018, Thin-Walled Structures.

[31]  Zengqiang Cao,et al.  Numerical and experimental investigation of fitting tolerance effects on damage and failure of CFRP/Ti double-lap single-bolt joints , 2018, Aerospace Science and Technology.

[32]  Guoqing Wu,et al.  A new approach to enhancing interlaminar strength and galvanic corrosion resistance of CFRP/Mg laminates , 2018 .

[33]  Patrick Van Rymenant,et al.  Weld-bonded stainless steel to carbon fibre-reinforced plastic joints , 2018 .

[34]  Maoyuan Li,et al.  Improvement in interlaminar strength and galvanic corrosion resistance of CFRP/Mg laminates by laser ablation , 2017 .

[35]  M. Vaezi,et al.  Distinctive roles of silane coupling agents on the corrosion inhibition performance of graphene oxide in epoxy coatings , 2017 .

[36]  R. Akkerman,et al.  The effect of titanium surface treatment on the interfacial strength of titanium – Thermoplastic composite joints , 2017 .

[37]  Jing Zhang,et al.  Effect of anodizing pretreatment on laser joining CFRP to aluminum alloy A6061 , 2016 .

[38]  Tao Zhou,et al.  Understanding the crystallization behavior of polyamide 6/polyamide 66 alloys from the perspective of hydrogen bonds: projection moving-window 2D correlation FTIR spectroscopy and the enthalpy , 2016 .

[39]  Kazuhiro Nakata,et al.  Joining of metal to plastic using friction lap welding , 2014 .

[40]  J. Pireaux,et al.  A novel dry chemical path way for diene and dienophile surface functionalization toward thermally responsive metal-polymer adhesion. , 2013, ACS applied materials & interfaces.

[41]  Seiji Katayama,et al.  Laser direct joining of carbon fiber reinforced plastic to aluminum alloy , 2013 .

[42]  Srinivasa D. Thoppul,et al.  Mechanics of mechanically fastened joints in polymer–matrix composite structures – A review , 2009 .

[43]  W. Chiu,et al.  Synthesis of UV-curable silane-coupling agent as an adhesion promoter , 2009 .

[44]  S. Katayama,et al.  Laser direct joining of metal and plastic , 2008 .

[45]  J. Iroh,et al.  Synthesis and Characterization of Polyimide/Silica Hybrid Composites , 1999 .

[46]  E. Mccafferty,et al.  Determination of the concentration of surface hydroxyl groups on metal oxide films by a quantitative XPS method , 1998 .

[47]  W. Stickle,et al.  Handbook of X-Ray Photoelectron Spectroscopy , 1992 .

[48]  Robert N. Wenzel,et al.  Surface Roughness and Contact Angle. , 1949 .