Biaxial/Multiaxial fatigue and fracture

Multiaxial fatigue of welded structures, High cycle multiaxial fatigue, Non-proportional and variable-amplitude loading, Defects, notches, crack growth, Low cycle multiaxial fatigue, Applications and testing methods

[1]  A. K. Vasudevan,et al.  Extension of the Unified Approach to fatigue crack growth to environmental interactions , 2001 .

[2]  J. O. Smith.  The effect of range of stress on the fatigue strength of metals , 1942 .

[3]  D. Duquette,et al.  The role of hydrogen in corrosion fatigue of high purity Al-Zn-Mg exposed to water vapor , 1988 .

[4]  T. Harris,et al.  Grain boundary diffusion of hydrogen in nickel , 1991 .

[5]  K. Sadananda,et al.  Short crack growth and internal stresses , 1997 .

[6]  D. Smith,et al.  Life Prediction of Notched Specimens Using Multiaxial Surface and Subsurface Strain Analyses , 1996 .

[7]  P. C. Paris,et al.  Threshold for Fatigue Crack Propagation and the Effects of Load Ratio and Frequency , 1973 .

[8]  E. G. Ellison,et al.  ELASTIC-PLASTIC BEHAVIOUR AND UNIAXIAL LOW CYCLE FATIGUE LIFE OF NOTCHED SPECIMENS , 1995 .

[9]  Tadeusz Łagoda,et al.  Energy approach to fatigue life estimation under combined tension with torsion , 2001 .

[10]  T. Topper,et al.  The Effects of Material Strength, Stress Ratio, and Compressive Overload on the Threshold Behavior of a SAE1045 Steel , 1985 .

[11]  Franck Morel.  A FATIGUE LIFE PREDICTION METHOD BASED ON A MESOSCOPIC APPROACH IN CONSTANT AMPLITUDE MULTIAXIAL LOADING , 1998 .

[12]  Andrea Carpinteri,et al.  Multiaxial high-cycle fatigue criterion for hard metals , 2001 .

[13]  M. Brown,et al.  CYCLIC DEFORMATION OF 1% Cr‐Mo‐V STEEL UNDER OUT‐OF‐PHASE LOADS , 1979 .

[14]  K. Sadananda,et al.  Analysis of high temperature fatigue crack growth behavior , 1997 .

[15]  Franck Morel.  Fatigue multiaxiale sous chargement d'amplitude variable , 1996 .

[16]  E. Orowan,et al.  Theory of the Fatigue of Metals , 1939 .

[17]  Vassilis P. Panoskaltsis,et al.  INVARIANT FORMULATION OF A GRADIENT DEPENDENT MULTIAXIAL HIGH-CYCLE FATIGUE CRITERION , 1996 .

[18]  G. R. Halford,et al.  Practical implementation of the double linear damage rule and damage curve approach for treating cumulative fatigue damage , 1981 .

[19]  I. V. Papadopoulos,et al.  Exploring the High-Cycle Fatigue Behaviour of Metals from the Mesoscopic Scale , 1996 .

[20]  E. G. Ellison,et al.  A SIMPLE THEORY FOR LOW CYCLE MULTIAXIAL FATIGUE , 1980 .

[21]  K Dang-Van,et al.  Macro-Micro Approach in High-Cycle Multiaxial Fatigue , 1993 .

[22]  S Kalluri,et al.  The Cumulative Fatigue Damage Behavior of MAR-M 247 in Air and High-Pressure Hydrogen , 1993 .

[23]  Guy Pluvinage,et al.  Application of a new model proposal for fatigue life prediction on notches and key-seats , 1999 .

[24]  K. Sadananda,et al.  Analysis of overload effects and related phenomena , 1999 .

[25]  Tadeusz Lagoda,et al.  Energy models for fatigue life estimation under uniaxial random loading. Part I: The model elaboration , 2001 .

[26]  Darrell F. Socie,et al.  Multiaxial Fatigue Damage Models , 1987 .

[27]  Re Little,et al.  Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life ( , 1981 .

[28]  K. Sadananda,et al.  Application of unified fatigue damage approach to compression–tension region , 1999 .

[29]  D. Nelson,et al.  Fatigue Life Predictions for a Notched Shaft in Combined Bending and Torsion , 1985 .

[30]  D. C. Chandler,et al.  High Strain Torsion Fatigue of Solid and Tubular Specimens , 1969 .

[31]  J. Grzelak,et al.  Spectral analysis of the criteria for multiaxial Random Fatigue , 1991 .

[32]  P. N. Mathur,et al.  Energy Versus Stress Theories for Combined Stress—A Fatigue Experiment Using a Rotating Disk , 1961 .

[33]  H. Döker,et al.  Fatigue Crack Growth Threshold: Implications, Determination and Data Evaluation , 1997 .

[34]  Guy Pluvinage,et al.  Fatigue of specimens subjected to combined loading. Role of hydrostatic pressure , 2001 .

[35]  D. Bouami,et al.  Notch effect in low cycle fatigue , 1999 .

[36]  A. K. Vasudevan,et al.  Analysis of fatigue crack growth under compression–compression loading , 2001 .

[37]  E. W. C. Wilkins,et al.  Cumulative damage in fatigue , 1956 .

[38]  K. Sadananda,et al.  Classification of fatigue crack growth behavior , 1995 .

[39]  J. Petit,et al.  Environment and load ratio effects on fatigue crack propagation near threshold conditions , 1980 .

[40]  A. Fatemi,et al.  A CRITICAL PLANE APPROACH TO MULTIAXIAL FATIGUE DAMAGE INCLUDING OUT‐OF‐PHASE LOADING , 1988 .

[41]  D. Smith,et al.  High Strain Biaxial Fatigue of a Structural Steel , 1994 .

[42]  Thang Bui-Quoc,et al.  Cumulative damage with interaction effect due to fatigue under torsion loading , 1982 .

[43]  G. W. Simmons,et al.  Recent progress in understanding environment assisted fatigue crack growth , 1981 .

[44]  E. Macha,et al.  Simulation investigations of the position of Fatigue Fracture Plane in materials with biaxial loads , 1989 .

[45]  Tim Topper,et al.  Effects of Compression and Compressive Overloads on the Fatigue Behavior of a 2024-T351 Aluminum Alloy and a SAE 1045 Steel , 1988 .

[46]  The Prediction of Fatigue Fracture under Combined Stresses at Stress Concentrations , 1960 .

[47]  Tadeusz Lagoda,et al.  Energy models for fatigue life estimation under uniaxial random loading. Part II: Verification of the model , 2001 .

[48]  George Sines,et al.  Fatigue Criteria Under Combined Stresses or Strains , 1981 .