Weldability Improvement of Immiscible Polycarbonate/GFRP by Femtosecond Laser Surface Treatment

[1]  Liqun Li,et al.  In situ SEM study on tensile fractured behavior of Al/steel laser welding-brazing interface , 2022, Materials & Design.

[2]  Haipeng Wang,et al.  Robust Heterojunctions of Metallic Alloy and Carbon Fiber-Reinforced Composite Induced by Laser Processing , 2021, Materials.

[3]  Bo Chen,et al.  Influence of process parameters on the joint characteristics during laser joining of aluminium alloy and CFRTP , 2021 .

[4]  Bappa Acherjee,et al.  Laser transmission welding of polymers – A review on process fundamentals, material attributes, weldability, and welding techniques , 2020 .

[5]  C. Wunderling,et al.  Laser-based surface pre-treatment for metal-plastic hybrids using a new process strategy , 2020 .

[6]  A. Lasagni,et al.  Hierarchical Micro-/Nano-Structures on Polycarbonate via UV Pulsed Laser Processing , 2020, Nanomaterials.

[7]  Chong Zheng,et al.  Research on the surface morphological and electrochemical modification of polyvinyl chloride induced by KrF and ArF excimer laser direct writing. , 2020, Applied optics.

[8]  E. Akman,et al.  Investigation of the differences between photochemical and photothermal laser ablation on the shear strength of CFRP/CFRP adhesive joints , 2020 .

[9]  M. Ilie,et al.  Experimental design investigation of through-transmission laser welding of dissimilar polymers , 2020, Journal of Physics: Conference Series.

[10]  Wenwu Zhang,et al.  Laser direct joining of CFRTP and aluminium alloy with a hybrid surface pre-treating method , 2019, Composites Part B: Engineering.

[11]  Jianguo Liu,et al.  Superhydrophobic polytetrafluoroethylene surfaces with accurately and continuously tunable water adhesion fabricated by picosecond laser direct ablation , 2019, Materials & Design.

[12]  J. Shan,et al.  Suppression of shrinkage porosity in laser-joining of CFRP and steel using a laser surface modification process “Surfi-Sculpt ®” , 2018, International Journal of Adhesion and Adhesives.

[13]  S. Genna,et al.  Experimental analysis of laser assisted joining of Al-Mg aluminium alloy with Polyetheretherketone (PEEK) , 2018, International Journal of Adhesion and Adhesives.

[14]  Xiaoyan Zeng,et al.  Surface microstructure and chemistry of polyimide by single pulse ablation of picosecond laser , 2018 .

[15]  Huixia Liu,et al.  Enhancement of the Laser Transmission Weldability between Polyethylene and Polyoxymethylene by Plasma Surface Treatment , 2017, Materials.

[16]  P. Dubruel,et al.  Clear to clear laser welding for joining thermoplastic polymers: a comparative study based on physicochemical characterization , 2017 .

[17]  L. Sun,et al.  Experimental investigation of the strength of polymer-steel direct adhesion (PSDA) joints with micro-structures ablated by laser , 2017 .

[18]  G. Zak,et al.  Matching of laser intensity distribution for laser transmission welding of thermoplastics , 2017, Welding in the World.

[19]  Zhenfeng Wang,et al.  Thermal bonding of thermoplastic elastomer film to PMMA for microfluidic applications , 2017 .

[20]  Huixia Liu,et al.  The study of laser transmission joining PA66 and PVC with large compatibility difference , 2017 .

[21]  Huixia Liu,et al.  Investigation on the laser transmission weldability and mechanism of the graft-modified polyethylene and PA66 , 2016 .

[22]  Huixia Liu,et al.  Performance and mechanism of laser transmission joining between glass fiber‐reinforced PA66 and PC , 2016 .

[23]  Lin Li,et al.  A comparison of the characteristics of excimer and femtosecond laser ablation of acrylonitrile butadiene styrene (ABS) , 2016 .

[24]  A. Olowinsky,et al.  Experimental and Simulative Investigations of Laser Assisted Plastic-metal-joints Considering Different Load Directions , 2016 .

[25]  J. Watts,et al.  Laser Surface Modification of Poly(etheretherketone) to Enhance Surface Free Energy, Wettability and Adhesion , 2015 .

[26]  Huixia Liu,et al.  Study on Welding Mechanism Based on Modification of Polypropylene for Improving the Laser Transmission Weldability to PA66 , 2015, Materials.

[27]  Alexander Olowinsky,et al.  Influence of carbon black and indium tin oxide absorber particles on laser transmission welding , 2015 .

[28]  M. Zaeh,et al.  Laser surface pre-treatment of aluminum for hybrid joints with glass fiber reinforced thermoplastics , 2015 .

[29]  Jianguo Liu,et al.  Surface modification of bisphenol A polycarbonate using an ultraviolet laser with high-speed, direct-writing technology , 2014 .

[30]  Jianguo Liu,et al.  Surface modification of bisphenol A polycarbonate material by ultraviolet Nd:YVO4 laser high-speed microprocessing technology , 2014 .

[31]  Seiji Katayama,et al.  Mechanical property and joining characteristics of laser direct joining of CFRP to polyethylene terephthalate , 2014 .

[32]  E. A. Jensen,et al.  Investigation on high strength laser welds of polypropylene and high‐density polyethylene , 2013 .

[33]  Michael Schmidt,et al.  Thermal Joining of Thermoplastic Metal Hybrids by Means Of Mono- and Polychromatic Radiation , 2013 .

[34]  S. Nouh,et al.  Influence of Laser Irradiation on the Optical and the Mechanical Properties of Makrofol-DE Polycarbonate , 2011 .

[35]  W. Knapp,et al.  Glue-free assembly of glass fiber reinforced thermoplastics using laser light , 2011, Eco-Photonics.

[36]  A. Olowinsky,et al.  Laser Assisted Joining of Plastic Metal Hybrids , 2011 .

[37]  David R. McKenzie,et al.  Transmission laser welding of amorphous and semi-crystalline poly-ether–ether–ketone for applications in the medical device industry , 2010 .

[38]  Arnold Gillner,et al.  Advances in hybrid laser joining , 2010 .

[39]  Z. K. Wang,et al.  Polymer hydrophilicity and hydrophobicity induced by femtosecond laser direct irradiation , 2009 .

[40]  Robert R. Thomson,et al.  Ultrashort laser ablation of PMMA and intraocular lenses , 2008 .

[41]  E. Spyratou,et al.  Study of visible and mid-infrared laser ablation mechanism of PMMA and intraocular lenses: experimental and theoretical results , 2008, Lasers in Medical Science.

[42]  Marianna Kontopoulou,et al.  Contour Laser – Laser-Transmission Welding of Glass Reinforced Nylon 6 , 2006 .

[43]  Koji Sugioka,et al.  Femtosecond‐laser‐assisted wet chemical etching of polymer materials , 2006 .

[44]  T. A. Railkar,et al.  Femtosecond ultraviolet (248 nm) excimer laser processing of Teflon (PTFE) [rapid communication] , 2003 .

[45]  F. Kannari,et al.  Ultraviolet and vacuum-ultraviolet laser ablation of organic polymers , 1993 .

[46]  R. Srinivasan,et al.  Ablation of polymethyl methacrylate films by pulsed (ns) ultraviolet and infrared (9.17 μm) lasers: A comparative study by ultrafast imaging , 1993 .

[47]  R. Sauerbrey,et al.  Pulsed ultraviolet laser ablation , 1993 .

[48]  P. Dyer,et al.  XeCl laser ablation of polyetheretherketone , 1990 .

[49]  R. Srinivasan,et al.  Ultraviolet laser ablation and decomposition of organic materials , 1990 .