Highly efficient removal of hexavalent chromium in aqueous solutions via chemical reduction of plate-like micro/nanostructured zero valent iron

The removal of hexavalent chromium [Cr(VI)] from aqueous solutions using plate-like micro/nanostructured zero valent iron (MNZVI), which is fabricated in mass production by ball-milling of reductive iron powders, is investigated in this study. It has been shown that this plate-like MNZVI has significantly enhanced ability to remove Cr(VI) from aqueous solutions as compared to commercial zero valent iron (CZVI). Cr(VI) in a concentration of 100 ppm at pH = 2 can be removed nearly completely within 20 min by the addition of 1.5 g L−1 MNZVI. The time-dependent removal amount of Cr(VI) can be well described by a pseudo first-order kinetic model. The reaction rate constant for MNZVI is 20 times larger than that for CZVI. Further experiments have revealed that the Cr(VI) removal is also associated with the pH value and initial concentration of Cr(VI) in the solution, in addition to the iron dosage. These enhanced removal performances are attributed to the iron-induced reduction process of Cr(VI) and the high specific surface area of MNZVI. Further, electroplating wastewater was used to demonstrate the practical applications of MNZVI. The removal capacity is up to 330 mg g−1 in the electroplating wastewater with a 556 ppm initial Cr(VI) content, which is more than 3 times higher than that of CZVI and also much higher than the previously reported results. This study has demonstrated that the ball milling-induced plate-like MNZVI is a good candidate material for efficient treatment of Cr(VI)-containing wastewater.

[1]  Jian Lu,et al.  Origin and spatial distribution of heavy metals and carcinogenic risk assessment in mining areas at You'xi County southeast China , 2018 .

[2]  Dongsu Bi,et al.  Fast and highly efficient removal of chromium (VI) using humus-supported nanoscale zero-valent iron: Influencing factors, kinetics and mechanism , 2017 .

[3]  A. M. Amat,et al.  Combining ZVI reduction with photo-Fenton process for the removal of persistent pollutants , 2017 .

[4]  Shaoling Li,et al.  Heavy metal removal using nanoscale zero-valent iron (nZVI): Theory and application. , 2017, Journal of hazardous materials.

[5]  Dongye Zhao,et al.  Remediation of hexavalent chromium contaminated soil by biochar-supported zero-valent iron nanoparticles. , 2016, Journal of hazardous materials.

[6]  Yan Yu,et al.  Chemically stable and reusable nano zero-valent iron/graphite-like carbon nitride nanohybrid for efficient photocatalytic treatment of Cr(VI) and rhodamine B under visible light , 2016 .

[7]  Y. Long,et al.  Aerosol-Assisted Self-Assembly of Reticulated N-Doped Carbonaceous Submicron Spheres for Effective Removal of Hexavalent Chromium. , 2016, ACS applied materials & interfaces.

[8]  W. Cai,et al.  Enhanced degradation performances of plate-like micro/nanostructured zero valent iron to DDT. , 2016, Journal of hazardous materials.

[9]  Zuoming Zhou,et al.  Evaluation of highly active nanoscale zero-valent iron coupled with ultrasound for chromium(VI) removal , 2015 .

[10]  W. Cai,et al.  Micro/nanostructured porous Fe-Ni binary oxide and its enhanced arsenic adsorption performances. , 2015, Journal of colloid and interface science.

[11]  Archana Sharma,et al.  In situ reductive regeneration of zerovalent iron nanoparticles immobilized on cellulose for atom efficient Cr(VI) adsorption , 2015 .

[12]  A. Naghizadeh.  Comparison between activated carbon and multiwall carbon nanotubes in the removal of cadmium(II) and chromium(VI) from water solutions , 2015 .

[13]  M. Fang,et al.  Effect of silicate on the formation and stability of Ni-Al LDH at the γ-Al2O3 surface. , 2014, Environmental science & technology.

[14]  S. Bengió,et al.  Highly efficient removal of Cr(VI) from water with nanoparticulated zerovalent iron: Understanding the Fe(III)–Cr(III) passive outer layer structure , 2014 .

[15]  H. Ding,et al.  Structure‐Enhanced Photocatalytic Removal of CrVI by a TiO2 Superstructure with Ultrathin Rutile Nanorods and Abundant {110} Faces , 2013 .

[16]  W. Cai,et al.  One-step fabrication of high performance micro/nanostructured Fe3S4–C magnetic adsorbent with easy recovery and regeneration properties , 2013 .

[17]  Xinhua Xu,et al.  Highly active nanoscale zero-valent iron (nZVI)-Fe3O4 nanocomposites for the removal of chromium(VI) from aqueous solutions. , 2012, Journal of colloid and interface science.

[18]  X. Qiu,et al.  Removal of chromium in electroplating wastewater by nanoscale zero-valent metal with synergistic effect of reduction and immobilization , 2011 .

[19]  I. Lo,et al.  Column study of Cr(VI) removal by cationic hydrogel for in-situ remediation of contaminated groundwater and soil. , 2011, Journal of contaminant hydrology.

[20]  B. K. Dutta,et al.  Reduction of hexa-valent chromium with zero-valent iron: Batch kinetic studies and rate model , 2011 .

[21]  Tongzhou Liu,et al.  Influences of Humic Acid on Cr(VI) Removal by Zero-Valent Iron From Groundwater with Various Constituents: Implication for Long-Term PRB Performance , 2011 .

[22]  P. Calabrò,et al.  Heavy metals removal and hydraulic performance in zero-valent iron/pumice permeable reactive barriers. , 2010, Journal of environmental management.

[23]  G. Piringer,et al.  Nanoscale Zerovalent Iron Supported on Uniform Carbon Microspheres for the In situ Remediation of Chlorinated Hydrocarbons , 2010 .

[24]  J. Mao,et al.  Influence of complex reagents on removal of chromium(VI) by zero-valent iron. , 2008, Chemosphere.

[25]  Xiao-qin Li,et al.  Stoichiometry of Cr(VI) Immobilization Using Nanoscale Zerovalent Iron (nZVI): A Study with High-Resolution X-Ray Photoelectron Spectroscopy (HR-XPS) , 2008 .

[26]  H. Aly,et al.  Batch kinetics and thermodynamics of chromium ions removal from waste solutions using synthetic adsorbents. , 2007, Journal of hazardous materials.

[27]  Dinesh Mohan,et al.  Activated carbons and low cost adsorbents for remediation of tri- and hexavalent chromium from water. , 2006, Journal of hazardous materials.

[28]  B. D. Pandey,et al.  REMEDIATION OPTIONS FOR THE TREATMENT OF ELECTROPLATING AND LEATHER TANNING EFFLUENT CONTAINING CHROMIUM—A REVIEW , 2006 .

[29]  C. Seidel,et al.  Pilot‐scale studies of Hexavalent Chromium Removal from drinking water , 2006 .

[30]  S. Guha,et al.  Removal of chromium from synthetic plating waste by zero-valent iron and sulfate-reducing bacteria. , 2005 .

[31]  J. Park,et al.  Use of waste iron metal for removal of Cr(VI) from water. , 2003, Chemosphere.

[32]  R. Bowman.  Applications of surfactant-modified zeolites to environmental remediation , 2003 .

[33]  T. Tatsumi,et al.  Adsorption of Chromate and Arsenate by Amino-Functionalized MCM-41 and SBA-1 , 2002 .

[34]  O. Hao,et al.  Microbial Chromium (VI) Reduction , 1998 .

[35]  D. Sabatini,et al.  Coupled iron corrosion and chromate reduction: mechanisms for subsurface remediation. , 1995, Environmental science & technology.

[36]  J. Patterson,et al.  Optimization for Reduction/Precipitation Treatment of Hexavalent Chromium , 1994 .

[37]  Li-na Shi,et al.  Removal of chromium (VI) from wastewater using bentonite-supported nanoscale zero-valent iron. , 2011, Water research.

[38]  Ming-hua Zhou,et al.  Effects and mechanism of humic acid on chromium(VI) removal by zero-valent iron (Fe0) nanoparticles , 2011 .

[39]  Wei Zhao,et al.  Dechlorination of PCBs in the simulative transformer oil by microwave-hydrothermal reaction with zero-valent iron involved. , 2011, Chemosphere.