Life cycle analysis (LCA) and life cycle cost analysis (LCCA) of phase change materials (PCM) for thermal applications: A review

[1]  Mehmet Esen,et al.  Geometric design of solar-aided latent heat store depending on various parameters and phase change materials , 1998 .

[2]  Javier Neila,et al.  Applications of Phase Change Material in highly energy-efficient houses , 2012 .

[3]  A. Sharma,et al.  Review on thermal energy storage with phase change materials and applications , 2009 .

[4]  Luisa F. Cabeza,et al.  Thermal energy storage in building integrated thermal systems: A review. Part 2. Integration as passive system , 2016 .

[5]  Luisa F. Cabeza,et al.  Life cycle assessment of a ventilated facade with PCM in its air chamber , 2014 .

[6]  Agis M. Papadopoulos,et al.  Energy efficiency in the Hellenic building sector: An assessment of the restrictions and perspectives of the market , 2010 .

[7]  Germán Ferreira,et al.  Phase change material applications in buildings: an environmental assessment for some Spanish climate severities. , 2013, The Science of the total environment.

[8]  Kamil Kaygusuz,et al.  Performance of solar-assisted heat-pump systems , 1995 .

[9]  Zhiqiang Zhai,et al.  Modeling phase change materials embedded in building enclosure: A review , 2013 .

[10]  Khamid Mahkamov,et al.  Solar energy storage using phase change materials , 2007 .

[11]  Philippe Bournot,et al.  Thermal performance of an integrated collector storage solar water heater (ICSSWH) with phase change materials (PCM) , 2014 .

[12]  D. Morrison,et al.  Effects of phase-change energy storage on the performance of air-based and liquid-based solar heating systems , 1977 .

[13]  Soteris A. Kalogirou,et al.  Phase change materials (PCMs) integrated into transparent building elements: a review , 2015, Materials for Renewable and Sustainable Energy.

[14]  Amar M. Khudhair,et al.  A review on phase change energy storage: materials and applications , 2004 .

[15]  Dong Li,et al.  Investigations on thermal and optical performances of a glazing roof with PCM layer , 2017 .

[16]  Hans-Jürgen Dr. Klüppel,et al.  The Revision of ISO Standards 14040-3 - ISO 14040: Environmental management – Life cycle assessment – Principles and framework - ISO 14044: Environmental management – Life cycle assessment – Requirements and guidelines , 2005 .

[17]  Na Zhu.  Energy performance and optimal control of air-conditioned buildings integrated with phase change materials , 2011 .

[18]  Uroš Stritih,et al.  PCM thermal storage system for ‘free’ heating and cooling of buildings , 2015 .

[19]  Brian Norton,et al.  Increased photovoltaic performance through temperature regulation by phase change materials: Materials comparison in different climates , 2015 .

[20]  H. Nishina,et al.  A SOLAR GREENHOUSE WITH PHASE CHANGE ENERGY STORAGE AND A MICROCOMPUTER CONTROL SYSTEM , 1981 .

[21]  Y. Varol,et al.  Energy and exergy analysis of a latent heat storage system with phase change material for a solar collector , 2008 .

[22]  Luisa F. Cabeza,et al.  Materials used as PCM in thermal energy storage in buildings: A review , 2011 .

[23]  Khamid Mahkamov,et al.  Passive thermal control in residential buildings using phase change materials , 2016 .

[24]  Maria C. Browne,et al.  Indoor Characterisation of a Photovoltaic/ Thermal Phase Change Material System , 2015 .

[25]  Mehmet Esen.  Thermal performance of a solar-aided latent heat store used for space heating by heat pump , 2000 .

[26]  A. Kribus,et al.  PCM storage for solar DHW: An unfulfilled promise? , 2008 .

[27]  Abdelhamid Farhat,et al.  Improvement of the greenhouse climate using a solar air heater with latent storage energy , 2014 .

[28]  H. Öztürk.  Experimental evaluation of energy and exergy efficiency of a seasonal latent heat storage system for greenhouse heating , 2005 .

[29]  Brian Norton,et al.  Heat retention of a photovoltaic/thermal collector with PCM , 2016 .

[30]  Wasim Saman,et al.  Thermal performance of PCM thermal storage unit for a roof integrated solar heating system , 2005 .

[31]  Luisa F. Cabeza,et al.  Evaluation of the environmental impact of experimental buildings with different constructive systems using Material Flow Analysis and Life Cycle Assessment , 2013 .

[32]  Xu Xu,et al.  Experimental study of under-floor electric heating system with shape-stabilized PCM plates , 2005 .

[33]  Martin Belusko,et al.  Maximisation of heat transfer in a coil in tank PCM cold storage system , 2011 .

[34]  H. Nishina,et al.  SOLAR HEATING OF A COMMERCIAL GREENHOUSE BY MEANS OF LATENT HEAT STORAGE , 1988 .

[35]  M. H. Mahfuz,et al.  Performance investigation of thermal energy storage system with Phase Change Material (PCM) for solar water heating application , 2014 .

[36]  T. Kousksou,et al.  PCM storage for solar DHW: From an unfulfilled promise to a real benefit , 2011 .

[37]  Luisa F. Cabeza,et al.  Optimization of three new compositions of stabilized rammed earth incorporating PCM: Thermal properties characterization and LCA , 2013 .

[38]  Michael D. Lepech,et al.  Materials design for sustainability through life cycle modeling of engineered cementitious composites , 2008 .

[39]  K. Kaygusuz.  Investigation of a combined solar–heat pump system for residential heating. Part 1: experimental results , 1999 .

[40]  K. Kaygusuz.  Phase Change Energy Storage for Solar Heating Systems , 2003 .

[41]  Ahmad Hasan,et al.  Energy and Cost Saving of a Photovoltaic-Phase Change Materials (PV-PCM) System through Temperature Regulation and Performance Enhancement of Photovoltaics , 2014 .

[42]  Agis M. Papadopoulos,et al.  Environmental performance evaluation of thermal insulation materials and its impact on the building , 2007 .

[43]  Luisa F. Cabeza,et al.  Stabilized rammed earth incorporating PCM: Optimization and improvement of thermal properties and Life Cycle Assessment , 2012 .

[44]  Luisa F. Cabeza,et al.  Life Cycle Assessment of alveolar brick construction system incorporating phase change materials (PCMs) , 2013 .

[45]  Na Zhu,et al.  Energy performance and optimal control of air-conditioned buildings with envelopes enhanced by phase change materials , 2011 .

[46]  Karthik Panchabikesan,et al.  Review on phase change material based free cooling of buildings—The way toward sustainability , 2015 .

[47]  S. Canbazoğlu,et al.  Enhancement of solar thermal energy storage performance using sodium thiosulfate pentahydrate of a conventional solar water-heating system , 2005 .

[48]  Shazim Ali Memon,et al.  Phase change materials integrated in building walls: A state of the art review , 2014 .

[49]  Mohammed M. Farid,et al.  A Review on Energy Conservation in Building Applications with Thermal Storage by Latent Heat Using Phase Change Materials , 2021, Thermal Energy Storage with Phase Change Materials.

[50]  H. Paksoy,et al.  Review on using microencapsulated phase change materials (PCM) in building applications , 2015 .

[51]  Ignacio Zabalza Bribián,et al.  Life cycle assessment of building materials: Comparative analysis of energy and environmental impacts and evaluation of the eco-efficiency improvement potential , 2011 .

[52]  Luisa F. Cabeza,et al.  Evaluation of the environmental impact of experimental cubicles using Life Cycle Assessment: A highlight on the manufacturing phase , 2012 .

[53]  H. Nishina,et al.  GREENHOUSE HEATING BY MEANS OF LATENT HEAT STORAGE UNITS , 1984 .

[54]  Joan Rieradevall,et al.  LCA & LCCA of a PCM application to control root zone temperatures of hydroponic crops in comparison with conventional root zone heating systems , 2016 .

[55]  Sheikh Ahmad Zaki,et al.  A review on phase change material (PCM) for sustainable passive cooling in building envelopes , 2016 .

[56]  Na Zhu,et al.  Dynamic characteristics and energy performance of buildings using phase change materials: A review , 2009 .

[57]  Nasrudin Abd Rahim,et al.  Review of PCM based cooling technologies for buildings , 2012 .

[58]  A. Kürklü.  Short-term thermal performance of a built-in solar storage for frost prevention in a greenhouse , 1998 .

[59]  Aydin Durmus,et al.  Performance analysis of a latent heat storage system with phase change material for new designed solar collectors in greenhouse heating , 2009 .

[60]  David J. Sailor,et al.  Evaluation of phase change materials for improving thermal comfort in a super-insulated residential building , 2014 .

[61]  Arild Gustavsen,et al.  Phase Change Materials for Building Applications: A State-of-the-Art Review , 2010 .

[62]  A. Kürklü.  Energy storage applications in greenhouses by means of phase change materials (PCMs): a review , 1998 .

[63]  Dan Zhou,et al.  Review on thermal energy storage with phase change materials (PCMs) in building applications , 2012 .

[64]  Luisa F. Cabeza,et al.  Thermal energy storage in building integrated thermal systems: A review. Part 1. active storage systems , 2016 .

[65]  Joan Rieradevall,et al.  Analysis of the technical, environmental and economic potential of phase change materials (PCM) for root zone heating in Mediterranean greenhouses , 2017 .

[66]  T. Boulard,et al.  Performance of a greenhouse heating system with a phase change material , 1990 .

[67]  Mohd Zobir Hussein,et al.  Advanced energy storage materials for building applications and their thermal performance characterization: a review , 2016 .

[68]  Brian Norton,et al.  Evaluation of phase change materials for thermal regulation enhancement of building integrated photovoltaics , 2010 .

[69]  C. Benard,et al.  Experimental comparison of latent and sensible heat thermal walls , 1985 .

[70]  Paris A. Fokaides,et al.  Life Cycle Assessment (LCA) of Phase Change Materials (PCMs) for building applications: A review , 2016 .

[71]  Paulo Santos,et al.  Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency , 2013 .

[72]  A. Abhat.  Low temperature latent heat thermal energy storage: Heat storage materials , 1983 .

[73]  Bjørn Petter Jelle,et al.  Phase Change Materials and Products for Building Applications: A State-of-the-Art Review and Future Research Opportunities , 2015 .

[74]  Luisa F. Cabeza,et al.  Life cycle assessment of the inclusion of phase change materials (PCM) in experimental buildings , 2010 .

[75]  Frédéric Kuznik,et al.  A review on phase change materials integrated in building walls , 2011 .

[76]  A. Al-Ghandoor,et al.  Experimental investigation on the use of water-phase change material storage in conventional solar water heating systems , 2010 .

[77]  L. Cabeza,et al.  PCM-module to improve hot water heat stores with stratification , 2003 .

[78]  Luisa F. Cabeza,et al.  Life Cycle Assessment of experimental cubicles including PCM manufactured from natural resources (esters): A theoretical study , 2013 .

[79]  Mehmet Esen,et al.  Development of a model compatible with solar assisted cylindrical energy storage tank and variation of stored energy with time for different phase change materials , 1996 .

[80]  Brian Norton,et al.  Phase change materials for photovoltaic thermal management , 2015 .