Fast parameter identification and modeling of electric load based on simplified composite load model

Load is one of the most important parts of power system and imposes great impact on stability of the system. Proper modeling and parameter identification of load are instructive for power system stability study and control. However, because of the nonlinearity, randomness and time-variation, load modeling and parameter identification remain a big problem in power system simulation and stability analysis. Composite load model is one of the most common models for load in power system simulation. This paper introduces an online parameter identification and modeling method for electric load based on a new simplified composite load model. The approach includes three parts: the dominance analysis of parameter and model simplification, the phasor measurement and calculation, and the online parameter identification. A test on the method is also shown with the simulation of a typical case system.

[1]  Hongwen Xu,et al.  IPSO-BP hybrid prediction model and its application in power load , 2009, 2009 2nd IEEE International Conference on Computer Science and Information Technology.

[2]  G. A. Mahmoud.  Voltage stability analysis of radial distribution networks using catastrophe theory , 2012 .

[3]  Chuanzhi Zang,et al.  Research on Time-Sharing ZIP Load Modeling Based on Linear BP Network , 2013, 2013 5th International Conference on Intelligent Human-Machine Systems and Cybernetics.

[4]  Yang Fan,et al.  Research on synthesis load modeling with online statistical measurement-based method , 2011, 2011 International Conference on Consumer Electronics, Communications and Networks (CECNet).

[5]  R. E. Wilson,et al.  Uses of precise time and frequency in power systems , 1991, Proc. IEEE.

[6]  A. T. Alouani,et al.  Real time estimation of sensitive parameters of composite power system load model , 2012, PES T&D 2012.

[7]  K. Kawabe,et al.  Analytical Method for Short-Term Voltage Stability Using the Stability Boundary in the P-V Plane , 2014, IEEE Transactions on Power Systems.

[8]  Li Nan.  Apply Empirical Mode Decomposition Based Hilbert Transform to Power System Transient Signal Analysis , 2005 .

[9]  Tu Guoli.  Key Techniques for Composite Load Area Integral Equivalence and Online Parameter Identification , 2012 .

[10]  P. Regulski,et al.  Estimation of Composite Load Model Parameters Using an Improved Particle Swarm Optimization Method , 2015, IEEE Transactions on Power Delivery.

[11]  Xiaorong Xie,et al.  Fast Online Identification of the Dominant Parameters of Composite Load Model Using Volterra Model and Pattern Classification , 2007, 2007 IEEE Power Engineering Society General Meeting.

[12]  Junqi Liu,et al.  Adaptive load shedding based on combined frequency and voltage stability assessment using synchrophasor measurements , 2013, IEEE Transactions on Power Systems.

[13]  Wen-Shiow Kao,et al.  The effect of load models on unstable low-frequency oscillation damping in Taipower system experience w/wo power system stabilizers , 2001, 2001 Power Engineering Society Summer Meeting. Conference Proceedings (Cat. No.01CH37262).

[14]  Yung-Tien Chen,et al.  Comparison of simulated power system dynamics applying various load models with actual recorded data , 1994 .

[15]  Xiaojing Wang,et al.  An online load identification algorithm for non-intrusive load monitoring in homes , 2013, 2013 IEEE Eighth International Conference on Intelligent Sensors, Sensor Networks and Information Processing.