A novel Heat Exchanger Network Bridge Retrofit method using the Modified Energy Transfer Diagram

Abstract The aim of this paper is to develop a novel method for the retrofit of Heat Exchanger Networks based on Bridge Retrofit analysis. The method identifies Retrofit Bridges that correspond to energy saving modifications using two new proposed tools: The Heat Surplus-Deficit Table and the Modified Energy Transfer Diagram. These tools both allow the identification and quantification of Retrofit Bridges. These tools have been developed following conventional Pinch Analysis tools such as the Composite Curve and Grand Composite Curve. The connection between the conventional Heat Exchanger Network synthesis tools and the proposed retrofit tools is established to improve understanding of the method and relate it to what is currently used in both literature and industry. The method is demonstrated with a simple illustrative example and a more detail paper mill case study. The paper mill incorporates a paper machine and paper recycling plant and is co-located with a Kraft pulp mill in New Zealand. Results from the retrofit method suggest a retrofit design that will achieve an annualised profit of NZD 570,000/y (USD 414,000/y) with a payback of 2.4 y.

[1]  Zainuddin Abdul Manan,et al.  Heat exchanger network retrofit using individual stream temperature vs enthalpy plot , 2017 .

[2]  Paul Stuart,et al.  Linking pinch analysis and bridge analysis to save energy by heat-exchanger network retrofit , 2016 .

[3]  Marian Trafczynski,et al.  Handbook of Process Integration (PI). Minimisation of Energy and Water Use, Waste and Emissions , 2015 .

[4]  Jiří Jaromír Klemeš,et al.  Total Site Heat Integration planning and design for industrial, urban and renewable systems , 2017 .

[5]  Jean-Christophe Bonhivers,et al.  New analysis method to reduce the industrial energy requirements by heat-exchanger network retrofit: Part 2 – Stepwise and graphical approach , 2017 .

[6]  Ruzhu Wang,et al.  Heat integration of ammonia-water absorption refrigeration system through heat-exchanger network analysis , 2017 .

[7]  Milan Korbel,et al.  Energy transfer diagram for improving integration of industrial systems , 2014 .

[8]  Masoud Beheshti,et al.  An extended energy saving method for modification of MTP process heat exchanger network , 2017 .

[9]  Serge Bédard,et al.  Optimal retrofit of heat exchanger networks: A stepwise approach , 2017, Comput. Chem. Eng..

[10]  Robin Smith,et al.  Retrofit of heat exchanger networks with heat transfer enhancement based on an area ratio approach , 2016 .

[11]  Lluvia M. Ochoa-Estopier,et al.  Optimization of Heat-Integrated Crude Oil Distillation Systems. Part III: Optimization Framework , 2015 .

[12]  Mamdouh A. Gadalla,et al.  A new graphical method for Pinch Analysis applications: Heat exchanger network retrofit and energy integration , 2015 .

[13]  Gade Pandu Rangaiah,et al.  Review of Heat Exchanger Network Retrofitting Methodologies and Their Applications , 2014 .

[14]  Petar Sabev Varbanov,et al.  Rules for paths construction for HENs debottlenecking , 2000 .

[15]  Zdravko Kravanja,et al.  Syntheses of sustainable supply networks with a new composite criterion - Sustainability profit , 2017, Comput. Chem. Eng..

[16]  Sharifah Rafidah Wan Alwi,et al.  Process Integration and Intensification: Saving Energy, Water and Resources , 2014 .

[17]  Paul Stuart,et al.  New analysis method to reduce the industrial energy requirements by heat-exchanger network retrofit: Part 1 – Concepts , 2017 .

[18]  Megan Jobson,et al.  Optimization of Heat-Integrated Crude Oil Distillation Systems. Part II: Heat Exchanger Network Retrofit Model , 2015 .

[19]  Robin Smith,et al.  Heat exchanger network retrofit with a fixed network structure , 2014 .

[20]  Robin Smith,et al.  Recent development in the retrofit of heat exchanger networks , 2010 .

[21]  Fatma H. Ashour,et al.  Temperature driving force (TDF) curves for heat exchanger network retrofit – A case study and implications , 2017 .

[22]  Thore Berntsson,et al.  Use of advanced composite curves for assessing cost-effective HEN retrofit I: Theory and concepts , 2009 .

[23]  Megan Jobson,et al.  Optimization of Heat-Integrated Crude Oil Distillation Systems. Part I: The Distillation Model , 2015 .

[24]  Thore Berntsson,et al.  Comparison between pinch analysis and bridge analysis to retrofit the heat exchanger network of a kraft pulp mill , 2014 .

[25]  Thore Berntsson,et al.  Energy transfer diagram for site-wide analysis and application to a kraft pulp mill , 2015 .

[26]  Robin Smith,et al.  Cost-effective strategy for heat exchanger network retrofit , 2017 .

[27]  Petar Sabev Varbanov,et al.  Heat exchanger network retrofit supported by extended Grid Diagram and heat path development , 2015 .

[28]  Igor Bulatov,et al.  Improving heat recovery in retrofitting heat exchanger networks with heat transfer intensification, pressure drop constraint and fouling mitigation , 2016 .

[29]  Jiří Jaromír Klemeš,et al.  Forty years of Heat Integration: Pinch Analysis (PA) and Mathematical Programming (MP) , 2013 .

[30]  Luis Puigjaner,et al.  Targeting and design methodology for reduction of fuel, power and CO2 on total sites , 1997 .