Surface modification of polycarbonate and polyethylene naphtalate foils by UV-ozone treatment and μPlasma printing

Abstract In this study, we investigated the effect of UV-ozone and μPlasma printing on surface modification of polycarbonate (PC) and polyethylene naphthalate (PEN). The effects on the wetting behaviour was studied, in terms of surface energy and chemical modification of the treated substrate, by analysis of attenuated total reflectance-Fourier transform infrared spectrometry (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). Both UV-ozone and μPlasma printing are effective ways to modify the wettability of both polymer substrates, substantially increasing the wetting envelope after a short treatment period. This increase is primarily due to an increase of the polar part of the surface energy. This is confirmed by ATR-FTIR and XPS, which show the formation of oxygen containing groups as well as a decrease in the aromatic C C bonds on the surface of the substrate due to the treatment. For both types of surface treatment, prolonged exposure showed no further increase in wettability, although continuous change in chemical composition of the surface was measured. This effect is more evident for UV-ozone treatment, as a larger increase in O/C ratio of the surface was measured as compared to μPlasma printing. It can be concluded that μPlasma printing results in a more chemically selective modification as compared to UV-ozone. In the case that chemical selectivity and treatment time are considered important, μPlasma printing is favourable over UV-ozone.

[1]  L. Gerenser,et al.  Plasma Treatment of Polymers , 2003 .

[2]  D. K. Owens,et al.  Estimation of the surface free energy of polymers , 1969 .

[3]  G. Borcia,et al.  The surface oxidation of selected polymers using an atmospheric pressure air dielectric barrier discharge. Part I , 2004 .

[4]  Y. S. Kim,et al.  Effects of plasma surface treatments on inkjet-printed feature sizes and surface characteristics , 2011 .

[5]  R. Morent,et al.  Treatment of polymer films with a dielectric barrier discharge in air, helium and argon at medium pressure , 2007 .

[6]  Pekka Ruuskanen,et al.  The characterization of electrically conductive silver ink patterns on flexible substrates , 2009, Microelectron. Reliab..

[7]  U. Schubert,et al.  Inkjet Printing of Polymers: State of the Art and Future Developments , 2004 .

[8]  J. Hill,et al.  A comparison of gas-phase methods of modifying polymer surfaces , 1995 .

[9]  Per Stenius,et al.  Contact angles, work of adhesion, and interfacial tensions at a dissolving Hydrocarbon surface , 1987 .

[10]  G. Krausch,et al.  Wetting at polymer surfaces and interfaces , 2003 .

[11]  G. Julius Vancso,et al.  Hydrophobic recovery of UV/ozone treated poly(dimethylsiloxane): adhesion studies by contact mechanics and mechanism of surface modification , 2005 .

[12]  K. Weltmann,et al.  On the Use of Atmospheric Pressure Plasma for the Bio-Decontamination of Polymers and Its Impact on Their Chemical and Morphological Surface Properties , 2012, Plasma Chemistry and Plasma Processing.

[13]  J. Meichsner,et al.  Plasma Modification of Polymer Films Studied by Ellipsometry and Infrarot Spectroscopy , 1994 .

[14]  C. Chan,et al.  Polymer surface modification by plasmas and photons , 1996 .

[15]  R. C. King,et al.  Handbook of X Ray Photoelectron Spectroscopy: A Reference Book of Standard Spectra for Identification and Interpretation of Xps Data , 1995 .

[16]  R. Wilken,et al.  Subsurface chemistry in the plasma treatment of polymers , 1999 .

[17]  John R. Vig.  UV/ozone cleaning of surfaces , 1976 .

[18]  R. Morent,et al.  Comparison between XPS‐ and FTIR‐analysis of plasma‐treated polypropylene film surfaces , 2008 .

[19]  N D Robinson,et al.  Organic materials for printed electronics. , 2007, Nature materials.

[20]  M. Zembala,et al.  Plasma surface modification of polyethylene , 2003 .

[21]  Michael A. Haase,et al.  Recent Progress in Organic Electronics: Materials, Devices, and Processes , 2004 .

[22]  W. Brok,et al.  Maskless Patterning by Pulsed-Power Plasma Printing , 2012, IEEE Transactions on Plasma Science.