Improvement of Electrochemical Performances of Li [ Ni0.8Co0.1Mn0.1 ] O2 Cathode Materials by Fluorine Substitution

Layered Li[Ni 0.8 Co 0.1 Mn 0.1 ]O 2-z F z (z = 0, 0.02, 0.04, and 0.06) materials having spherical morphology have been synthesized by a hydroxide coprecipitation method. The effect of fluorine content on the structure, morphology, electrochemical properties, and thermal stability of the Li[Ni 0.8 Co 0.1 Mn 0.1 ]O 2-z F z has been extensively studied. Electrochemical impedance spectroscopy and electron microscopy showed that fluorine substitution played the important role of reducing the interfacial resistance between cathode and electrolyte, resulting from stabilization of the host structure. The fluorine substitution for oxygen substantially improved the overall electrochemical properties of Li[Ni 0.8 Co 0.1 Mn 0.1 ]O 2 , such as the capacity retention, rate capability, and thermal stability.

[1]  Yang‐Kook Sun,et al.  Overcoming Jahn‐Teller Distortion for Spinel Mn Phase , 1999 .

[2]  Yang‐Kook Sun,et al.  Synthetic optimization of Li[Ni 1/3Co 1/3Mn 1/3]O 2 via co-precipitation , 2004 .

[3]  Crystal structure study of LiNi1−xMnxO2 , 1995 .

[4]  Jean-Marie Tarascon,et al.  Failure mechanism and improvement of the elevated temperature cycling of LiMn2O4 compounds through the use of the LiAlxMn2-xO4-zFz solid solution , 2001 .

[5]  G. Rao,et al.  Cathodic behavior of (Co, Ti, Mg)-doped LiNiO2 , 2001 .

[6]  Aline Rougier,et al.  An Overview of the Li(Ni,M)O2 Systems: Syntheses, Structures and Properties , 1999 .

[7]  Yang‐Kook Sun,et al.  Synthesis and electrochemical properties of Li[Ni0.8Co0.1Mn0.1]O2 and Li[Ni0.8Co0.2]O2 via co-precipitation , 2006 .

[8]  Seung‐Taek Myung,et al.  Effect of fluorine on Li[Ni1/3Co1/3Mn1/3]O2−zFz as lithium intercalation material , 2005 .

[9]  B. Löchel,et al.  Breakdown of Passivity of Nickel by Fluoride I . Electrochemical Studies , 1984 .

[10]  B. Löchel,et al.  Breakdown of Passivity of Nickel by Fluoride II . Surface Analytical Studies , 1984 .

[11]  Seung‐Taek Myung,et al.  Enhanced structural stability and cyclability of Al-doped LiMn2O4 spinel synthesized by the emulsion drying method , 2001 .

[12]  Seung‐Taek Myung,et al.  Role of Alumina Coating on Li−Ni−Co−Mn−O Particles as Positive Electrode Material for Lithium-Ion Batteries , 2005 .

[13]  Yang‐Kook Sun,et al.  Improvement of High-Voltage Cycling Behavior of Surface-Modified Li [ Ni1 ∕ 3Co1 ∕ 3Mn1 ∕ 3 ] O2 Cathodes by Fluorine Substitution for Li-Ion Batteries , 2005 .

[14]  K. Amine,et al.  Effect of fluorine on the electrochemical properties of layered Li(Ni 0.5Mn 0.5)O 2 cathode material , 2005 .

[15]  A. Manthiram,et al.  Structural Instability of Delithiated Li1−x Ni1−y Co y O2 Cathodes , 2001 .

[16]  Yang‐Kook Sun,et al.  Structural and electrochemical study of Li–Al–Mn–O–F spinel material for lithium secondary batteries , 2005 .

[17]  U. V. Sacken,et al.  Crystal structures and electrochemical properties of LiAlyNi1−yO2 solid solution , 1995 .

[18]  W. B. Ebner,et al.  Novel LiNi1 − x Ti x / 2Mg x / 2 O 2 Compounds as Cathode Materials for Safer Lithium‐Ion Batteries , 1999 .

[19]  R. Thorn,et al.  Relation between orbital binding energies and ionicities in alkali and alkaline earth flourides , 1980 .

[20]  S. Okada,et al.  Thermal behavior of Li1-yNiO2 and the decomposition mechanism , 1998 .

[21]  Daniel P. Abraham,et al.  Surface changes on LiNi0.8Co0.2O2 particles during testing of high-power lithium-ion cells , 2002 .

[22]  John A. Michon,et al.  Design considerations , 1993, Generic Intelligent Driver Support.

[23]  Sangwook Lee,et al.  The effect of Al(OH)3 coating on the Li[Li0.2Ni0.2Mn0.6]O2 cathode material for lithium secondary battery , 2005 .

[24]  R. Holze,et al.  Effects of heteroatoms on electrochemical performance of electrode materials for lithium ion batteries , 2002 .

[25]  M. Broussely,et al.  LixNiO2, a promising cathode for rechargeable lithium batteries , 1995 .

[26]  C. Yoon,et al.  Effect of Fluorine on the Electrochemical Properties of Layered Li [ Ni0.43Co0.22Mn0.35 ] O2 Cathode Materials via a Carbonate Process , 2005 .

[27]  John B. Goodenough,et al.  Lithium insertion into Fe2(MO4)3 frameworks: Comparison of M = W with M = Mo , 1987 .

[28]  S. Yamada,et al.  Synthesis and properties of LiNiO2 as cathode material for secondary batteries , 1995 .

[29]  Patrick Willmann,et al.  Effect of cobalt substitution on cationic distribution in LiNi1 − y CoyO2 electrode materials , 1996 .