Heuristic design of pressure swing adsorption: a preliminary study

Abstract Due to its complicated nature and multiple decision parameters including plant dimensionality and operation condition, the design of pressure swing adsorption (PSA) processes is not a trivial task. Most previous studies on PSA design have been made through rigorous modeling and experimental investigation for specific separation tasks. General heuristics for a preliminary design of PSA processes are necessary but not well investigated so far. In this paper, we attempt to develop easy-to-use rules for PSA process design, based on analysis of the inherent properties of adsorbate–adsorbent systems (i.e. equilibrium isotherm, adsorption kinetics, shape of breakthrough curves, etc.) and simulation results. These rules include the selection of adsorbent, particle size, bed size, bed configuration, purge volume, pressure equalization and vacuum swing adsorption. Results of two case studies are presented to verify the rules proposed in this preliminary study.

[1]  M. Chahbani,et al.  Mass transfer kinetics in pressure swing adsorption , 2000 .

[2]  Peter Harriott,et al.  Unit Operations of Chemical Engineering , 2004 .

[3]  A. Weissberger,et al.  Separation and purification , 1956 .

[4]  E. Alpay,et al.  The linear driving force model for fast-cycle adsorption and desorption in a spherical particle , 1992 .

[5]  R. T. Yang,et al.  Gas Separation by Adsorption Processes , 1987 .

[6]  Alírio E. Rodrigues,et al.  Pressure swing adsorption processes: intraparticle diffusion/convection models , 1993 .

[7]  R Rajasree,et al.  Simulation based synthesis, design and optimization of pressure swing adsorption (PSA) processes , 2000 .

[8]  Douglas M. Ruthven,et al.  Pressure swing adsorption. Part III: Numerical simulation of a kinetically controlled bulk gas separation , 1985 .

[9]  Alírio E. Rodrigues,et al.  Pressurization and blowdown of adsorption beds—II. Effect of the momentum and equilibrium relations on isothermal operation , 1993 .

[10]  K. S. Knaebel,et al.  Pressure swing adsorption , 1993 .

[11]  M. LeVan,et al.  Dynamics of pressurization and blowdown of an adiabatic bed: III , 1992 .

[12]  S. Nilchan,et al.  On the Optimisation of Periodic Adsorption Processes , 1998 .

[13]  T. Hertzberg,et al.  Optimization of pressure swing adsorption systems : the effect of mass transfer during the blowdown step , 1995 .

[14]  Douglas M. Ruthven,et al.  Numerical simulation of a PSA system. Part I: Isothermal trace component system with linear equilibrium and finite mass transfer resistance , 1985 .

[15]  K. Loughlin,et al.  Separation of methane—nitrogen mixtures by pressure swing adsorption using a carbon molecular sieve , 1995 .