Blast resistance of membrane retrofit unreinforced masonry walls with flexible connections

Unreinforced masonry infill walls are one of the most economical and widely used exterior wall systems. However, they can produce secondary fragments due to their brittle failure modes when subjected to an impulsive blast load. One retrofit to reinforce existing masonry walls is to install a membrane that prevents fragments from entering the building’s interior. Previous research focused on defining the resistance provided by the wall membrane system, but did not include flexibility of the attachments and their influence on the retrofitted wall system. This article addresses that issue through (1) a review of existing membrane retrofit resistance definitions, (2) a derivation of the resistance definition that includes connection flexibility, (3) validation of the derived resistance definition through nonlinear finite element analyses, and (4) comparison of the resistance in a single-degree-of-freedom framework against full-scale blast testing.

[1]  John M. Hoemann,et al.  Boundary Connection Behavior and Connection Design for Retrofitted Unreinforced Masonry Walls Subjected to Blast Loads (Preprint) , 2010 .

[2]  Jonathan R. Porter,et al.  Explosive Testing of Polymer Retrofit Masonry Walls , 2004 .

[3]  Hani A. Salim,et al.  Blast-Retrofit of CMU Walls Using Steel Sheets , 2006 .

[4]  James S. Davidson,et al.  Resistance of Membrane Retrofit Concrete Masonry Walls to Lateral Pressure (POSTPRINT) , 2008 .

[5]  James S. Davidson,et al.  Development of Computational Models and Input Sensitivity Study of Polymer Reinforced Concrete Masonry Walls Subjected to Blast , 2004 .

[6]  Hani A. Salim,et al.  Validation and Design of Sheet Retrofits , 2010 .

[7]  J. Davidson,et al.  Resistance of Concrete Masonry Walls with Membrane Catcher Systems Subjected to Blast Loading , 2011 .

[8]  John M. Hoemann,et al.  Assessment of resistance definitions used for blast analysis of unreinforced masonry walls , 2017 .

[9]  Carl K. Wiehle,et al.  EXISTING STRUCTURES EVALUATION. PART I: WALLS. , 1968 .

[10]  Jonathan R. Porter,et al.  Failure Mechanisms of Polymer-Reinforced Concrete Masonry Walls Subjected to Blast , 2005 .

[11]  James S. Davidson,et al.  Response of Bonded Membrane Retrofit Concrete Masonry Walls to Dynamic Pressure , 2009 .

[12]  Jordan Wheeler Lane.  Modeling and design of explosion-resistant steel stud wall systems , 2003 .

[13]  Hani A. Salim,et al.  THE USE AND MISUSE OF STRUCTURAL DAMPING IN BLAST RESPONSE CALCULATIONS , 1998 .

[14]  Eric Gagnet.  Static Resistance Functions for Unbonded Retrofit Unreinforced Concrete Masonry Walls with Plate Connection for Blast Design Applications , 2013 .

[15]  Paul Seide,et al.  Large deflections of rectangular membranes under uniform pressure , 1977 .

[16]  Hani A. Salim,et al.  BLAST RETROFIT DESIGN OF CMU WALLS USING POLYMER SHEETS , 2006 .