MONITORING OF A LARGE CRACKED CONCRETE SAMPLE WITH NON- LINEAR MIXING OF ULTRASONIC CODA WAVES

A high precision can be achieved with ultrasonic coda waves to monitor the mechanical properties of concrete material (~10 -5 in relative). This high sensitivity can be used to detect damage initiation and to closely follow concrete mechanical properties evolution with time. This advantage is counterbalance by the influence of environmental conditions making reproducibility of any experiment in concrete a challenging issue especially when in situ measurements are performed. Indeed thermal and water gradients present in the thickness of the structures (several decimetres) cannot be controlled and must be compensated. In this paper a protocol to remove environmental bias is proposed. Furthermore, to follow the apparition of a tensile crack in a metric size structure, non-linear mixing of coda wave via frequency-swept pump waves is tested. It is shown that, when the crack is closed (by pre-stressing cables), it is still possible to detect its presence. The non-linearity of the cracked zone remains at a high level, comparable to the case when the crack was open.

[1]  Olivier Durand,et al.  Nonlinear mixing of ultrasonic coda waves with lower frequency-swept pump waves for a global detection of defects in multiple scattering media , 2013 .

[2]  Stephen Hall,et al.  Monitoring stress related velocity variation in concrete with a 2 x 10(-5) relative resolution using diffuse ultrasound. , 2009, The Journal of the Acoustical Society of America.

[3]  J. Michaels,et al.  A methodology for structural health monitoring with diffuse ultrasonic waves in the presence of temperature variations. , 2005, Ultrasonics.

[4]  Alexander Sutin,et al.  Micro-damage diagnostics using Nonlinear Elastic Wave Spectroscopy (NEWS) , 2001 .

[5]  Smith,et al.  Universal slow dynamics in granular solids , 2000, Physical review letters.

[6]  Lev A. Matveev,et al.  On the ultimate sensitivity of nonlinear-modulation method of crack detection , 2009 .

[7]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[8]  Olivier Durand,et al.  Study of stress-induced velocity variation in concrete under direct tensile force and monitoring of the damage level by using thermally-compensated Coda Wave Interferometry. , 2012, Ultrasonics.

[9]  Roel Snieder,et al.  Coda wave interferometry and the equilibration of energy in elastic media. , 2002, Physical review. E, Statistical, nonlinear, and soft matter physics.

[10]  Joseph Moysan,et al.  Determination of third order elastic constants in a complex solid applying coda wave interferometry , 2009 .

[11]  Olivier Durand,et al.  Following stress level modification of real size concrete structures with coda wave interferometry (CWI) , 2011 .

[12]  Eric Larose,et al.  Observation of multiple scattering of kHz vibrations in a concrete structure and application to monitoring weak changes. , 2006, Physical review. E, Statistical, nonlinear, and soft matter physics.

[13]  Laurence J. Jacobs,et al.  Damage detection in concrete using coda wave interferometry , 2011 .

[14]  Olivier Durand,et al.  Validation of a thermal bias control technique for Coda Wave Interferometry (CWI). , 2013, Ultrasonics.

[15]  Alexander Sutin,et al.  Nonlinear acoustic interaction on contact interfaces and its use for nondestructive testing , 2001 .

[16]  Philippe Roux,et al.  Stability of monitoring weak changes in multiply scattering media with ambient noise correlation: laboratory experiments. , 2009, The Journal of the Acoustical Society of America.

[17]  Christoph Sens-Schönfelder,et al.  Monitoring stress changes in a concrete bridge with coda wave interferometry. , 2011, The Journal of the Acoustical Society of America.

[18]  Gerd Dobmann,et al.  Non-destructive evaluation of reinforced concrete structures , 2010 .

[19]  Roel Snieder,et al.  The Theory of Coda Wave Interferometry , 2006 .

[20]  Dario Vangi,et al.  Methodology for minimizing effects of temperature in monitoring with the acousto-ultrasonic technique , 1999 .