论文信息 - Experimental research on axisymmetric folded-combined cavity CO2 laser

Experimental research on axisymmetric folded-combined cavity CO2 laser

Abstract Rationality and feasibility of axisymmetric folded-combined cavity CO 2 laser which is reported in this paper have been proved by principle experiments. The laser lays a foundation to manufacture higher power CO 2 lasers whose output power can easily reach 1 kW. Faculas at different positions in free space and facula of nine beams which pass through the beam focusing optics have been obtained. Analyses of the experimental results are made. These analyses lay a foundation for beam transformation, transmission and shaping.

[1] J. Gong,et al. Research on laser welding of vehicle body , 2008 .

[2] K. Y. Benyounis,et al. Multi-response optimization of CO2 laser-welding process of austenitic stainless steel , 2008 .

[3] Howard J. Baker,et al. High-power two-dimensional waveguide CO/sub 2/ laser arrays , 1996 .

[4] Dejin Hu,et al. CO2 laser beam modulating for surface texturing machining , 2008 .

[5] Clarence E. Capjack,et al. Phase-locking phenomena in a radial multislot CO 2 laser array , 1993 .

[6] Xiangzhong Jin. A three-dimensional model of multiple reflections for high-speed deep penetration laser welding based on an actual keyhole , 2008 .

[7] Jinglun Liu,et al. Axisymmetric-fold combination laser resonator , 2005 .

[8] Zhi‐zhan Xu,et al. Broadband high-gain optical parametric chirped-pulse amplification near 780 nm with LBO-I near-degenerate near-collinear phase match , 2005 .

[9] Clarence E. Capjack,et al. Phase locking in a multichannel radial array CO2 laser , 1993 .