Conductimetric sensor for atrazine detection based on molecularly imprinted polymer membranes

Atrazine-sensitive conductimetric sensors were designed using molecularly imprinted polymer membranes. Membranes containing artificial recognition sites for atrazine were prepared by copolymerization of methacrylic acid and a cross-linker, tri(ethylene glycol) dimethacrylate, in the presence of atrazine as a template. In order to improve the flexibility and mechanical stability of the membranes, oligourethane acrylate was added to the mixture of monomers. The recognition sites complementary to atrazine were formed in the membranes after extraction of the template molecules with ethanol. Alternatively, reference polymer membranes were prepared with the same monomers but without the template. The responses of the membranes prepared with and without the template were monitored conductimetrically. The membranes prepared in the presence of atrazine showed significantly stronger responses to atrazine than to analogous compounds (triazine, simazine, prometryn). The response time was 6–15 min depending on the membrane thickness. The effect of the membrane composition and the porogen concentration on the magnitude of the conductimetric responses was also investigated. With the sensor designed here, the detection of the atrazine at concentrations down to 5 nmol dm–3 was demonstrated. During a 6 month period, the sensitivity of the molecularly imprinted membranes to atrazine was found to remain constant.

[1]  Klaus Mosbach,et al.  Competitive amperometric morphine sensor based on an agarose immobilised molecularly imprinted polymer , 1995 .

[2]  M. Muldoon,et al.  Molecularly imprinted solid phase extraction of atrazine from beef liver extracts. , 1997, Analytical chemistry.

[3]  G. Robertson,et al.  Carboxylated polysulfone membranes having a chiral recognition site induced by an alternative molecular imprinting technique , 1998 .

[4]  Klaus Mosbach,et al.  Recognition sites incorporating both pyridinyl and carboxy functionalities prepared by molecular imprinting , 1993 .

[5]  Martin Siemann,et al.  Selective Recognition of the Herbicide Atrazine by Noncovalent Molecularly Imprinted Polymers , 1996 .

[6]  R. Landel,et al.  Mechanical Properties of Polymers and Composites , 1993 .

[7]  C. Mouvet,et al.  Validation of commercially available ELISA microtiter plates for triazines in water samples , 1995 .

[8]  J. Pawliszyn,et al.  Simultaneous determination of 60 pesticides in water using solid-phase microextraction and gas chromatography–mass spectrometry , 1996 .

[9]  Toshifumi Takeuchi,et al.  Solid-phase Extraction of a Triazine Herbicide Using a Molecularly Imprinted Synthetic Receptor , 1997 .

[10]  K. Shea,et al.  Imprinted Polymer Membranes for the Selective Transport of Targeted Neutral Molecules , 1996 .

[11]  Andreas Brecht,et al.  A direct optical immunosensor for atrazine detection , 1995 .

[12]  F. Bier,et al.  Integrated optical immunosensor for s-triazine determination: regeneration, calibration and limitations , 1994 .

[13]  Isao Karube,et al.  Imprinted membranes for sensor technology : Opposite behavior of covalently and noncovalently imprinted membranes , 1998 .

[14]  J. Matsui,et al.  Design and Preparation of Molecularly Imprinted Atrazine-Receptor Polymers: Investigation of Functional Monomers and Solvents , 1998 .

[15]  Isao Karube,et al.  Optical Detection System for Triazine Based on Molecularly-Imprinted Polymers , 1997 .

[16]  S. Eremin,et al.  Enzyme immunoassays for s-triazine herbicides and their application in environmental and food analysis , 1995 .

[17]  G. Wulff,et al.  Enzyme-analogue built polymers, 22. Influence of the nature of the crosslinking agent on the performance of imprinted polymers in racemic resolution† , 1987 .

[18]  I. Nicholls,et al.  Spectroscopic Evaluation of Molecular Imprinting Polymerization Systems , 1997 .

[19]  Isao Karube,et al.  Atrazine sensing by molecularly imprinted membranes , 1995 .

[20]  G. Wulff.  Molecular Imprinting in Cross‐Linked Materials with the Aid of Molecular Templates— A Way towards Artificial Antibodies , 1995 .