New modified smith predictor designs

Abstract By combining several existing modified Smith predictor structures, presented in a literature review, a generalised form for the Smith predictor is proposed. From this structure, excellent servo and regulator responses can be obtained by specifying three controller dynamic elements. Two new modified Smith predictor structures are presented with their associated tuning rules. The results of the simulations indicate that the two new designs give better overall responses than the original Smith predictor.

[1]  D Vrecko,et al.  A new modified Smith predictor: the concept, design and tuning. , 2001, ISA transactions.

[2]  A. O'Dwyer,et al.  An outline and further development of Smith predictor based methods for the compensation of processes with time delay , 2003 .

[3]  Aleksandar Micic,et al.  On the modified Smith predictor for controlling a process with an integrator and long dead-time , 1999, IEEE Trans. Autom. Control..

[4]  Furong Gao,et al.  Double-Controller Scheme for Separating Load Rejection from Set-Point Tracking , 1998 .

[5]  Alfredo C. Desages,et al.  Controller designs for model-plant parameter mismatch , 1988 .

[6]  Ljubi sa S. Draganovi,et al.  A NEW SMITH PREDICTOR FOR CONTROLLING A PROCESS WITH AN INTEGRATOR AND LONG DEAD-TIME : DESIGN AND TUNING , 2022 .

[7]  Eduardo F. Camacho,et al.  A unified approach to design dead-time compensators for stable and integrative processes with dead-time , 2002, IEEE Trans. Autom. Control..

[8]  Zalman J. Palmor,et al.  An auto-tuner for Smith dead time compensator , 1994 .

[9]  Yu-Chu Tian,et al.  Injection velocity control of thermoplastic injection molding via a double controller scheme , 1999 .

[10]  Richard Mitchell.  Multi-microprocessor control of processes with pure time delay , 1990 .

[11]  Cheng-Liang Chen,et al.  A modified Smith predictor with an approximate inverse of dead time , 1990 .

[12]  Aidan O'Dwyer,et al.  A new modified Smith predictor design , 2003, ISICT.

[13]  A. O'Dwyer.  A frequency domain technique for the estimation of the parameters of a delayed process , 2002 .

[14]  Masami Ito,et al.  Modified Smith predictor control for multivariable systems with delays and unmeasurable step disturbances , 1983 .

[15]  M. Matausek,et al.  A modified Smith predictor for controlling a process with an integrator and long dead-time , 1996, IEEE Trans. Autom. Control..

[16]  D. P. Atherton,et al.  Modified Smith predictor and controller for processes with time delay , 1999 .

[17]  Furong Gao,et al.  Control of integrator processes with dominant time delay , 1999 .

[18]  F. Léonard.  Tuning of a Modified Smith Predictor , 1998 .

[19]  Furong Gao,et al.  Double-controller scheme for control of processes with dominant delay , 1998 .

[20]  Stanko Strmčnik,et al.  Automatic tuning of the flexible Smith predictor controller , 1999, Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251).

[21]  O Smith,et al.  CLOSER CONTROL OF LOOPS WITH DEAD TIME , 1957 .

[22]  Weidong Zhang,et al.  Modified Smith Predictor for Controlling Integrator/Time Delay Processes , 1996 .

[23]  Jeffrey C. Kantor,et al.  The analysis and design of Smith predictors using singular Nyquist arrays , 1980 .