Application of plasma technology for treating e-waste: A review.

[1]  Vineet Singh Sikarwar,et al.  Progress in waste utilization via thermal plasma , 2020, Progress in Energy and Combustion Science.

[2]  K. Mo,et al.  Valorization of waste powders from cement-concrete life cycle: A pathway to circular future , 2020 .

[3]  S. You,et al.  Economic and environmental evaluation of flux agents in the vitrification of resin waste: A SWOT analysis. , 2020, Journal of environmental management.

[4]  S. You,et al.  Effect of shell powder on removal of metals and volatile organic compounds (VOCs) from resin in an atmospheric-pressure microwave plasma reactor. , 2020, Journal of hazardous materials.

[5]  Oladele A. Ogunseitan,et al.  Thermal degradation and pollutant emission from waste printed circuit boards mounted with electronic components. , 2019, Journal of hazardous materials.

[6]  Jian-wen Wang,et al.  Pollution Characteristics of Thermal Treatments for Elutriated Ashes. Part 2: Comparison with Incineration System and Plasma Melting System , 2018 .

[7]  Xiangjie Gong,et al.  Plasma methods for metals recovery from metal-containing waste. , 2018, Waste management.

[8]  Mohd Zamin Jumaat,et al.  Recycling of seashell waste in concrete: A review , 2018 .

[9]  Veena Sahajwalla,et al.  Sustainable composite panels from non-metallic waste printed circuit boards and automotive plastics , 2017 .

[10]  Sneha Samal,et al.  Thermal plasma technology: The prospective future in material processing , 2017 .

[11]  Zhi-yuan Zhang,et al.  Lead recovery and high silica glass powder synthesis from waste CRT funnel glasses through carbon thermal reduction enhanced glass phase separation process. , 2017, Journal of hazardous materials.

[12]  I. Janajreh,et al.  Plasma gasification of municipal solid waste with variable content of plastic solid waste for enhanced energy recovery , 2016, 2016 International Renewable and Sustainable Energy Conference (IRSEC).

[13]  Ana Regina de Aguiar Dutra,et al.  APPLICATION OF THERMAL PLASMA FOR INERTIZATION OF SLUDGE PRODUCED DURING TREATMENT OF LANDFILL LEACHATE , 2016 .

[14]  Jakub Szałatkiewicz,et al.  Metals Recovery from Artificial Ore in Case of Printed Circuit Boards, Using Plasmatron Plasma Reactor , 2016, Materials.

[15]  Atsushi Terazono,et al.  E-waste recycling processes in Indonesia, the Philippines, and Vietnam: A case study of cathode ray tube TVs and monitors , 2016 .

[16]  Marina de Medeiros Machado,et al.  Final treatment of spent batteries by thermal plasma. , 2015, Journal of environmental management.

[17]  Atsushi Terazono,et al.  Battery collection in municipal waste management in Japan: challenges for hazardous substance control and safety. , 2015, Waste management.

[18]  J. Sobik-Szołtysek,et al.  Vitrification as an alternative to landfilling of tannery sewage sludge. , 2014, Waste management.

[19]  Evangelos Gidarakos,et al.  Assessment of toxic metals in waste personal computers. , 2014, Waste management.

[20]  E. S. Moecke,et al.  Inertization of heavy metals present in galvanic sludge by DC thermal plasma. , 2014, Environmental science & technology.

[21]  Masanari Otsuka,et al.  Variation and distribution of metals and metalloids in soil/ash mixtures from Agbogbloshie e-waste recycling site in Accra, Ghana. , 2014, The Science of the total environment.

[22]  J. Szalatkiewicz.  Metals Content in Printed Circuit Board Waste , 2014 .

[23]  A. Terazono,et al.  Toxic metals in WEEE: characterization and substance flow analysis in waste treatment processes. , 2013, The Science of the total environment.

[24]  R. Afroz,et al.  Survey and analysis of public knowledge, awareness and willingness to pay in Kuala Lumpur, Malaysia – a case study on household WEEE management , 2013 .

[25]  S. Kim,et al.  Synthesis of nanosized glass powders using non-transferred dc thermal plasma process , 2013 .

[26]  Gordon McKay,et al.  Novel application of the nonmetallic fraction of the recycled printed circuit boards as a toxic heavy metal adsorbent. , 2013, Journal of hazardous materials.

[27]  Wei Lan,et al.  Experimental Study of Thermal Plasma Processing Waste Circuit Boards , 2013 .

[28]  J. Szalatkiewicz.  Metals Recovery from Waste of Printed Circuit Boards Processed in Plasmatron Plasma Reactor , 2013 .

[29]  Roman Szewczyk,et al.  Construction Aspects of Plasma Based Technology for Waste of Electrical and Electronic Equipment (WEEE) Management in Urban Areas , 2013 .

[30]  R. Kollar,et al.  Inertisation of galvanic sludge with calcium oxide, activated carbon, and phosphoric acid , 2012, Arhiv za higijenu rada i toksikologiju.

[31]  Meng Yuedong,et al.  Vitrification of MSWI Fly Ash by Thermal Plasma Melting and Fate of Heavy Metals , 2012 .

[32]  S. S. Rath,et al.  Treatment of electronic waste to recover metal values using thermal plasma coupled with acid leaching--a response surface modeling approach. , 2012, Waste management.

[33]  Yi-Ming Kuo,et al.  An alternative approach to recovering valuable metals from zinc phosphating sludge. , 2012, Journal of hazardous materials.

[34]  Shoude Wang,et al.  Effects of Shell and Calcium Carbonate on Properties of Portland Cement , 2012 .

[35]  Denise Crocce Romano Espinosa,et al.  Recycling of WEEE: characterization of spent printed circuit boards from mobile phones and computers. , 2011, Waste management.

[36]  J. Mostaghimi,et al.  Recovery of Cu and valuable metals from E-waste using thermal plasma treatment , 2011 .

[37]  Martin Streicher-Porte,et al.  Informal electronic waste recycling: a sector review with special focus on China. , 2011, Waste management.

[38]  Oladele Osibanjo,et al.  Evaluation of Heavy Metal Release from the Disposal of Waste Computer Monitors at an Open Dump , 2010 .

[39]  Kae‐Long Lin,et al.  Enhancement in early strengths of slag-cement mortars by adjusting basicity of the slag prepared from fly-ash of MSWI , 2009 .

[40]  Y. Kuo,et al.  Vitrification for reclaiming spent alkaline batteries. , 2009, Waste management.

[41]  Takanori Hino,et al.  Techniques to separate metal from waste printed circuit boards from discarded personal computers , 2009 .

[42]  C. Cheeseman,et al.  Thermal plasma technology for the treatment of wastes: a critical review. , 2009, Journal of hazardous materials.

[43]  Her-Yung Wang,et al.  A study of the effects of LCD glass sand on the properties of concrete. , 2009, Waste management.

[44]  Anthony B. Murphy,et al.  Thermal plasma waste treatment , 2008 .

[45]  Jale Yanik,et al.  Feedstock Recycling from the Printed Circuit Boards of Used Computers , 2008 .

[46]  Dong Xiang,et al.  Products made from nonmetallic materials reclaimed from waste printed circuit boards , 2007 .

[47]  Kuo-Lin Huang,et al.  Vitrification of chromium electroplating sludge. , 2007, Environmental science & technology.

[48]  Rolf Gloor,et al.  Metals, non-metals and PCB in electrical and electronic waste--actual levels in Switzerland. , 2007, Waste management.

[49]  T. Mahalingam,et al.  Plasma vitrification and re-use of non-combustible fiber reinforced plastic, gill net and waste glass. , 2006, Journal of hazardous materials.

[50]  Pierre Freton,et al.  Thermal plasma modelling , 2005 .

[51]  M. Zanetti,et al.  WEEE recycling: Pyrolysis of fire retardant model polymers. , 2005, Waste management.

[52]  Xingguo Li,et al.  Synthesis and characterization of CaCO3@SiO2 core–shell nanoparticles , 2004 .

[53]  Paolo Colombo,et al.  Inertization and reuse of waste materials by vitrification and fabrication of glass-based products , 2003 .

[54]  P. Komninou,et al.  Vitrification of lead-rich solid ashes from incineration of hazardous industrial wastes. , 2003, Waste management.

[55]  N. Kikukawa,et al.  Thermal plasma in-flight treatment of electroplating sludge , 2002 .

[56]  J. Chu,et al.  Treatment and recycling of incinerated ash using thermal plasma technology. , 2002, Waste management.

[57]  R. Cioffi,et al.  Environmental and technological effectiveness of a process for the stabilization of a galvanic sludge. , 2002, Journal of hazardous materials.

[58]  M. Boulos.  New frontiers in thermal plasma processing , 1996 .

[59]  Patrick R. Taylor,et al.  Thermal plasma processing of materials: A review , 1994 .

[60]  J. L. Shohet,et al.  Plasma-aided manufacturing , 1990 .