Condition monitoring of electrical machines and its relation to industrial internet

With the ever increasing spread of cloud computing services and industrial internet, the condition monitoring and diagnosis of electrical machines and drives is gradually shifting towards remote monitoring. This puts new requirements on the methodologies for condition monitoring through the communication and analysis of big data. In this paper we classify the different aspects of electrical machine diagnosis and investigate their relation with remote monitoring. The main emphasis is on two aspects out of four identified. The first one is the use of numerical simulations of faulty machines to generate the virtual data and relate global quantities to local ones. The second is the monitoring integration in the industrial internet, which means the hardware and software packaged within the monitored machine as well as the required information and communication technology. New trends in these fields are identified and analyzed and a synthesis of future needs is presented.

[1]  Jang-Young Choi,et al.  General vibration characteristics for stators of electric machines , 2013, 2013 International Conference on Electrical Machines and Systems (ICEMS).

[2]  Toomas Vaimann,et al.  Comprehensive computations of the response of faulty cage induction machines , 2014, 2014 International Conference on Electrical Machines (ICEM).

[3]  Yaguo Lei,et al.  A review on empirical mode decomposition in fault diagnosis of rotating machinery , 2013 .

[4]  G. Joksimovic,et al.  The detection of interturn short circuits in the stator windings of operating motors , 1998, IECON '98. Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.98CH36200).

[5]  Paavo Rasilo,et al.  Modeling of Losses Due to Inter-Laminar Short-Circuit Currents in Lamination Stacks , 2013 .

[6]  H. Henao,et al.  Efficient digital signal processing techniques for induction machines fault diagnosis , 2013, 2013 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD).

[7]  Ji-Yoon Yoo,et al.  Screening of False Induction Motor Fault Alarms Produced by Axial Air Ducts Based on the Space-Harmonic-Induced Current Components , 2015, IEEE Transactions on Industrial Electronics.

[8]  Wilson Wang,et al.  An enhanced Hilbert–Huang transform technique for bearing condition monitoring , 2013 .

[9]  R. Hanna,et al.  Failure Analysis of Induction Motors: Magnetic Wedges in Compression Stations , 2012, IEEE Industry Applications Magazine.

[10]  Bhim Singh,et al.  Investigation of Vibration Signatures for Multiple Fault Diagnosis in Variable Frequency Drives Using Complex Wavelets , 2014, IEEE Transactions on Power Electronics.

[11]  Gérard-André Capolino,et al.  Advances in Diagnostic Techniques for Induction Machines , 2008, IEEE Transactions on Industrial Electronics.

[12]  C. Gerada,et al.  The results do mesh , 2007, IEEE Industry Applications Magazine.

[13]  Jinde Zheng,et al.  Generalized empirical mode decomposition and its applications to rolling element bearing fault diagnosis , 2013 .

[14]  Dayue Chen,et al.  Numerical Prediction of Electromagnetic Vibration and Noise of Permanent-Magnet Direct Current Commutator Motors With Rotor Eccentricities and Glue Effects , 2012, IEEE Transactions on Magnetics.

[15]  Shuai Zhang,et al.  Gear fault identification based on Hilbert–Huang transform and SOM neural network , 2013 .

[16]  John E. Mottershead,et al.  Finite Element Model Updating in Structural Dynamics , 1995 .

[17]  Arturo Garcia-Perez,et al.  Reconfigurable Monitoring System for Time-Frequency Analysis on Industrial Equipment Through STFT and DWT , 2013, IEEE Transactions on Industrial Informatics.

[18]  A. Belahcen,et al.  Vibrations of rotating electrical machines due to magnetomechanical coupling and magnetostriction , 2006, IEEE Transactions on Magnetics.

[19]  F. Filippetti,et al.  Condition monitoring and diagnosis of rotor faults in induction machines: State of art and future perspectives , 2013, 2013 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD).

[20]  Makoto Matsushita,et al.  Change of Mechanical Natural Frequencies of Induction Motor , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[21]  Myeongsu Kang,et al.  High-Performance and Energy-Efficient Fault Diagnosis Using Effective Envelope Analysis and Denoising on a General-Purpose Graphics Processing Unit , 2015, IEEE Transactions on Power Electronics.

[22]  A. Vahedi,et al.  Static Eccentricity Fault Detection in Single-Stator–Single-Rotor Axial-Flux Permanent-Magnet Machines , 2012, IEEE Transactions on Industry Applications.

[23]  T.G. Habetler,et al.  A Survey of Methods for Detection of Stator-Related Faults in Induction Machines , 2007, IEEE Transactions on Industry Applications.

[24]  D G Dorrell,et al.  Sources and Characteristics of Unbalanced Magnetic Pull in Three-Phase Cage Induction Motors With Axial-Varying Rotor Eccentricity , 2011, IEEE Transactions on Industry Applications.

[25]  Jihong Yan,et al.  Improved Hilbert-Huang transform based weak signal detection methodology and its application on incipient fault diagnosis and ECG signal analysis , 2014, Signal Process..

[26]  Jose Antonino-Daviu,et al.  Detection of Broken Outer-Cage Bars for Double-Cage Induction Motors Under the Startup Transient , 2012, IEEE Transactions on Industry Applications.

[27]  Janne Roivainen,et al.  Unit-wave response-based computation of magnetic noise of electric machines , 2010, 2010 IEEE International Conference on Industrial Technology.

[28]  Konstantinos N. Gyftakis,et al.  The Zero-Sequence Current as a Generalized Diagnostic Mean in Δ-Connected Three-Phase Induction Motors , 2014, IEEE Transactions on Energy Conversion.

[29]  Peter Tavner,et al.  Review of condition monitoring of rotating electrical machines , 2008 .

[30]  Xiaoyuan Zhang,et al.  Multi-fault diagnosis for rolling element bearings based on ensemble empirical mode decomposition and optimized support vector machines , 2013 .

[31]  Humberto Henao,et al.  A Web-Based Remote Laboratory for Monitoring and Diagnosis of AC Electrical Machines , 2011, IEEE Transactions on Industrial Electronics.

[32]  Balbir S. Dhillon,et al.  Early fault diagnosis of rotating machinery based on wavelet packets—Empirical mode decomposition feature extraction and neural network , 2012 .

[33]  Oszkar Biro,et al.  Anisotropic Generalization of Vector Preisach Hysteresis Models for Nonoriented Steels , 2015, IEEE Transactions on Magnetics.

[34]  J. C. Kappatou,et al.  A Novel and Effective Method of Static Eccentricity Diagnosis in Three-Phase PSH Induction Motors , 2013, IEEE Transactions on Energy Conversion.

[35]  Antero Arkkio,et al.  Combined FE and two dimensional spectral analysis of broken cage faults in induction motors , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[36]  Antero Arkkio,et al.  Particle Filter-Based Estimation of Instantaneous Frequency for the Diagnosis of Electrical Asymmetries in Induction Machines , 2014, IEEE Transactions on Instrumentation and Measurement.

[37]  Antero Arkkio,et al.  Computation of additional losses due to rotor eccentricity in electrical machines , 2010 .

[38]  Konstantinos N. Gyftakis,et al.  Evaluation of different broken bar fault diagnostic means in double-cage induction motors with FEM , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).

[39]  Thomas G. Habetler,et al.  A survey of condition monitoring and protection methods for medium voltage induction motors , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[40]  Nicola Bianchi,et al.  Eccentricity in Synchronous Reluctance Motors—Part I: Analytical and Finite-Element Models , 2015, IEEE Transactions on Energy Conversion.

[41]  J. C. Kappatou,et al.  A Novel Approach for Broken Bar Fault Diagnosis in Induction Motors Through Torque Monitoring , 2013, IEEE Transactions on Energy Conversion.

[42]  A. Belahcen,et al.  Importance of Iron-Loss Modeling in Simulation of Wound-Field Synchronous Machines , 2012, IEEE Transactions on Magnetics.

[43]  Jawad Faiz,et al.  Magnetic field and vibration monitoring in permanent magnet synchronous motors under eccentricity fault , 2012 .

[44]  Hansjörg Kapeller,et al.  Robust Rotor Fault Detection by Means of the Vienna Monitoring Method and a Parameter Tracking Technique , 2008, IEEE Transactions on Industrial Electronics.

[45]  C. Geuzaine,et al.  Nonlinear Time-Domain Finite-Element Modeling of Thin Electromagnetic Shells , 2009, IEEE Transactions on Magnetics.

[46]  Gojko Joksimovic,et al.  The detection of inter-turn short circuits in the stator windings of operating motors , 2000, IEEE Trans. Ind. Electron..

[47]  P. Konar,et al.  Bearing fault detection of induction motor using wavelet and Support Vector Machines (SVMs) , 2011, Appl. Soft Comput..

[48]  Thomas G. Habetler,et al.  A survey of condition monitoring and protection methods for medium voltage induction motors , 2009 .

[49]  Subhasis Nandi,et al.  Detection of Eccentricity Faults in Induction Machines Based on Nameplate Parameters , 2011, IEEE Transactions on Industrial Electronics.

[50]  Rainer Drath,et al.  Industrie 4.0: Hit or Hype? [Industry Forum] , 2014, IEEE Industrial Electronics Magazine.

[51]  I. R. Praveen Krishna,et al.  Empirical mode decomposition of acoustic signals for diagnosis of faults in gears and rolling element bearings , 2012 .

[52]  Christian Kral,et al.  Detection of Broken Outer-Cage Bars for Double-Cage Induction Motors Under the Startup Transient , 2012 .

[53]  Robert X. Gao,et al.  Wavelets for fault diagnosis of rotary machines: A review with applications , 2014, Signal Process..

[54]  Antero Arkkio,et al.  Electromagnetic forces of the cage rotor in conical whirling motion , 2003 .

[55]  Leila Parsa,et al.  Recent Advances in Modeling and Online Detection of Stator Interturn Faults in Electrical Motors , 2011, IEEE Transactions on Industrial Electronics.

[56]  A. Belouchrani,et al.  Remote monitoring system of electrical machines via INTERNET , 2013, 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED).

[57]  A. Arkkio,et al.  Electrical fault diagnosis for an induction motor using an electromechanical FE model , 2014, 2014 International Conference on Electrical Machines (ICEM).

[58]  Vincent Choqueuse,et al.  Diagnosis of Three-Phase Electrical Machines Using Multidimensional Demodulation Techniques , 2012, IEEE Transactions on Industrial Electronics.

[59]  J. Rafiee,et al.  Application of mother wavelet functions for automatic gear and bearing fault diagnosis , 2010, Expert Syst. Appl..

[60]  H.A. Toliyat,et al.  Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review , 2005, IEEE Transactions on Energy Conversion.

[61]  Antero Arkkio,et al.  End-Winding Vibrations Caused by Steady-State Magnetic Forces in an Induction Machine , 2010, IEEE Transactions on Magnetics.

[62]  Anouar Belahcen,et al.  Three-Dimensional Eddy-Current Analysis in Steel Laminations of Electrical Machines as a Contribution for Improved Iron Loss Modeling , 2013, IEEE Transactions on Industry Applications.

[63]  Humberto Henao,et al.  Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques , 2014, IEEE Industrial Electronics Magazine.

[64]  Antero Arkkio,et al.  Broken bar indicators for cage induction motors and their relationship with the number of consecutive broken bars , 2013 .

[65]  Paul Handgruber,et al.  Evaluation of interlaminar eddy currents in induction machines , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[66]  Satish C. Sharma,et al.  Fault diagnosis of rolling element bearing using cyclic autocorrelation and wavelet transform , 2013, Neurocomputing.

[67]  Antero Arkkio,et al.  Signatures of electrical faults in the force distribution and vibration pattern of induction motors , 2006 .

[68]  Don-Ha Hwang,et al.  Analysis of Inverter-Fed Squirrel-Cage Induction Motor During Eccentric Rotor Motion Using FEM , 2008, IEEE Transactions on Magnetics.