New polyaniline/polypyrrole/polythiophene and functionalized multiwalled carbon nanotube-based nanocomposites

In this endeavor, a new type of nanocomposites has been developed from conducting organic polymers (layer-by-layer in situ polymerization of various monomers) and functionalized multiwalled carbon nanotubes (MWCNTs). Initially, functionalization of MWCNTs was achieved by sulfuric acid (H2SO4):nitric acid (HNO3) and HNO3:hydrogen peroxide treatment. A comparative study regarding the synthetic, morphological, and electrical profiles of raw MWCNTs (R-MWCNTs), pure-MWCNTs (P-MWCNTs), functionalized MWCNTs (F-MWCNTs), and polyaniline/polypyrrole/polythiophene-F-MWCNTs (PANI/PPy/PTh/F-MWCNTs) nanocomposites was successfully carried out. Introduction of functional groups on the surface of MWCNTs was confirmed by Fourier transform infrared spectra. Energy dispersive x-ray spectroscopy and Rutherford back scattering were employed for the elemental analyses. Morphology of the obtained hybrid material was studied via scanning electron microscopy and their thermal stability was investigated using thermogravimetric analysis. The dielectric constant and electrical conductivity were also measured. Result exploration revealed that F-MWCNTs were well functionalized ensuing interfacial entrapment between the carbon nanotubes and the matrix. In addition, the layer-by-layer deposition of PPy/PANI/PTh polymers enhanced the electrical conductivity of material relative to the neat ones. Besides, the improved thermal stability of composite was acquired when compared with the homopolymers.

[1]  U. Sundararaj,et al.  Big returns from small fibers: A review of polymer/carbon nanotube composites , 2004 .

[2]  W. D. de Heer,et al.  Carbon Nanotubes--the Route Toward Applications , 2002, Science.

[3]  H. Jiang,et al.  Controlled hybrid nanostructures through protein-mediated noncovalent functionalization of carbon nanotubes. , 2007, Angewandte Chemie.

[4]  Serge Lefrant,et al.  Polyaniline and Carbon Nanotubes Based Composites Containing Whole Units and Fragments of Nanotubes , 2003 .

[5]  R. Xia,et al.  Grafting of thermoresponsive polymer from the surface of functionalized multiwalled carbon nanotubes via atom transfer radical polymerization , 2008 .

[6]  A. Tajbakhsh,et al.  Polysiloxane surfactants for the dispersion of carbon nanotubes in nonpolar organic solvents. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[7]  F. Béguin,et al.  Supercapacitors based on conducting polymers/nanotubes composites , 2006 .

[8]  J. Xie,et al.  Fabrication of ultralong and electrically uniform single-walled carbon nanotubes on clean substrates. , 2009, Nano letters.

[9]  S. Iijima.  Helical microtubules of graphitic carbon , 1991, Nature.

[10]  Devendra Kumar,et al.  Recent progress in the development of nano-structured conducting polymers/nanocomposites for sensor applications , 2009 .

[11]  M. Karim,et al.  Synthesis and characterization of conducting polythiophene/carbon nanotubes composites , 2006 .

[12]  Junhe Yang,et al.  Preparation of highly conductive CNTs/polyaniline composites through plasma pretreating and in-situ polymerization , 2010 .

[13]  K. Watson,et al.  Fabrication and Characterization of High Temperature Resin/Carbon Nanofiber Composites , 2006 .

[14]  N. Boukos,et al.  Polypyrrole/MWNT nanocomposites synthesized through interfacial polymerization , 2009 .

[15]  R. Saraswathi,et al.  Polyaniline-carbon nanotube composites , 2008 .

[16]  Joo-Hiuk Son,et al.  Terahertz optical and electrical properties of hydrogen-functionalized carbon nanotubes , 2007 .

[17]  P. Kar,et al.  Doping effect of carboxylic acid group functionalized multi-walled carbon nanotube on polyaniline , 2011 .

[18]  Y. Sakka,et al.  Alignment of carbon nanotubes by magnetic fields and aqueous dispersion , 2009 .

[19]  V. Varadan,et al.  A novel nanocomposite from multiwalled carbon nanotubes functionalized with a conducting polymer , 2004 .

[20]  M. Karim,et al.  Synthesis of conducting polythiophene composites with multi-walled carbon nanotube by the γ-radiolysis polymerization method , 2008 .

[21]  A. G. Kurenya,et al.  Composites based on polyaniline and aligned carbon nanotubes , 2010 .

[22]  Ke-wei Zhang,et al.  Amino functionalization and characteristics of multi-walled carbon nanotube/poly(methyl methacrylate) nanocomposite , 2009 .

[23]  M. Ates.  Review study of electrochemical impedance spectroscopy and equivalent electrical circuits of conducting polymers on carbon surfaces , 2011 .

[24]  H. Pastawski,et al.  Crucial role of decoherence for electronic transport in molecular wires: Polyaniline as a case study , 2010, 1004.5552.

[25]  Pedro Gómez-Romero,et al.  Nanocomposites based on conducting polymers and carbon nanotubes: from fancy materials to functional applications. , 2006, Journal of nanoscience and nanotechnology.

[26]  Y. Chai,et al.  In situ chemo-synthesized multi-wall carbon nanotube-conductive polyaniline nanocomposites: characterization and application for a glucose amperometric biosensor. , 2011, Talanta.

[27]  François Béguin,et al.  Determination of the specific capacitance of conducting polymer/nanotubes composite electrodes using different cell configurations , 2005 .

[28]  Veena Choudhary,et al.  Polyaniline–MWCNT nanocomposites for microwave absorption and EMI shielding , 2009 .

[29]  P. Chowdhury,et al.  Potassium dichromate initiated polymerization of aniline , 2005 .

[30]  Hoeil Chung,et al.  Conducting polymer functionalized multi-walled carbon nanotubes with noble metal nanoparticles: Synthesis, morphological characteristics and electrical properties , 2009 .

[31]  X. Qin,et al.  Synthesis and supercapacitor characteristics of PANI/CNTs composites , 2010 .

[32]  Dong-Jin Lee,et al.  Polypyrrole-carbon nanotube composite films synthesized through gas-phase polymerization , 2010 .