Reformulation for Latent-Image Formation Model in Photolithography Using Numerical Absorbing Boundary Condition

A method for simulating latent image formation in a photoresist illuminated by an arbitrary imaging system is presented. A variational formulation for light scattering, which does not depend on a specific configuration of the imaging system, is derived and solved using the finite-element method. The perfectly matched layer absorbing boundary condition is applied to take wave propagation in the infinite region surrounding the photoresist into account. The validity of the method is examined by comparing the results with those made by the vertical propagation model and the previous two-dimensional models.

[1]  A. Neureuther,et al.  Modeling projection printing of positive photoresists , 1975, IEEE Transactions on Electron Devices.

[2]  E. Kintner,et al.  Method for the calculation of partially coherent imagery. , 1978, Applied optics.

[3]  Teruo Matsuzawa,et al.  Two-Dimensional Simulation of Photolithography on Reflective Stepped Substrate , 1987, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems.

[4]  Masud Mansuripur,et al.  Certain computational aspects of vector diffraction problems , 1989 .

[5]  Raj Mittra,et al.  Finite-element analysis of dielectric scatterers using the absorbing boundary condition , 1989 .

[6]  H. P. Urbach,et al.  Modeling latent-image formation in photolithography, using the Helmholtz equation , 1989 .

[7]  R. Guerrieri,et al.  Exploration of scattering from topography with massively parallel computers , 1989 .

[8]  H. P. Urbach,et al.  Thin-film interference effects in photolithography for finite numerical apertures , 1991 .

[9]  Roberto Guerrieri,et al.  Massively parallel algorithms for scattering in optical lithography , 1991, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[10]  Andrzej J. Strojwas,et al.  Modeling optical microscope images of integrated circuit structures , 1991 .

[11]  Jianming Jin,et al.  Edge-based finite elements and vector ABCs applied to 3-D scattering , 1992 .

[12]  C.-M. Yuan,et al.  Efficient light scattering modeling for alignment, metrology, and resist exposure in photolithography , 1992 .

[13]  Charles Vassallo,et al.  Reformulation for the beam-propagation method , 1993 .

[14]  R. Coifman,et al.  The fast multipole method for the wave equation: a pedestrian prescription , 1993, IEEE Antennas and Propagation Magazine.

[15]  Jian-Ming Jin,et al.  The Finite Element Method in Electromagnetics , 1993 .

[16]  Richard A. Ferguson,et al.  Some image modeling issues for I-line, 5X phase-shifting masks , 1994, Advanced Lithography.

[17]  John R. Brauer.  What every engineer should know about finite element analysis , 1995 .

[18]  Jin-Fa Lee,et al.  A perfectly matched anisotropic absorber for use as an absorbing boundary condition , 1995 .

[19]  A. R. Neureuther,et al.  Propagation effects of partial coherence in optical lithography , 1996 .

[20]  A. Erdmann,et al.  Simulation of light propagation in optical linear and nonlinear resist layers by finite difference beam propagation and other methods , 1996 .

[21]  Constantine A. Balanis,et al.  A two-dimensional finite element formulation of the perfectly matched layer , 1996 .

[22]  Ki-Ho Baik,et al.  Study on elliptical polarization illumination effects for microlithography , 1996 .

[23]  Bruce W. Smith.  Strategies Toward Sub-0.25 μm Lithography , 1997 .