Three-Objective Optimization of a Centrifugal Pump to Reduce Flow Recirculation and Cavitation

[2]  Tom Verstraete,et al.  Three-Dimensional Design and Optimization of a Transonic Rotor in Axial Flow Compressors , 2013 .

[3]  Kazuyoshi Yamamoto.  Instability in a Cavitating Centrifugal Pump , 1991 .

[4]  J. Reboud,et al.  Experimental and Numerical Studies in a Centrifugal Pump With Two-Dimensional Curved Blades in Cavitating Condition , 2003 .

[5]  Ismail Celik,et al.  Numerical Experiments on Application of Richardson Extrapolation With Nonuniform Grids , 1997 .

[6]  Christopher E. Brennen,et al.  The rotordynamic forces on a centrifugal pump impeller in the presence of cavitation , 1990 .

[7]  Rajeev Thakur,et al.  Optimizing the Synchronization Operations in Message Passing Interface One-Sided Communication , 2005, Int. J. High Perform. Comput. Appl..

[8]  Andrea Saltelli,et al.  An effective screening design for sensitivity analysis of large models , 2007, Environ. Model. Softw..

[9]  B. Launder,et al.  The numerical computation of turbulent flows , 1990 .

[10]  J. Franc.  The Rayleigh-Plesset equation: a simple and powerful tool to understand various aspects of cavitation , 2005 .

[11]  Kwang‐Yong Kim,et al.  Multi-objective optimization of solar air heater with obstacles on absorber plate , 2015 .

[12]  Saltelli Andrea,et al.  Global Sensitivity Analysis: The Primer , 2008 .

[13]  François Avellan,et al.  Centrifugal Pump Performance Drop Due to Leading Edge Cavitation: Numerical Predictions Compared With Model Tests , 1998 .

[14]  Max D. Morris,et al.  Factorial sampling plans for preliminary computational experiments , 1991 .

[15]  J. L. Hallam.  Centrifugal pumps: which suction specific speeds are acceptable , 1982 .

[16]  Raphael T. Haftka,et al.  Surrogate-based Analysis and Optimization , 2005 .

[17]  F. Menter.  Two-equation eddy-viscosity turbulence models for engineering applications , 1994 .

[18]  Donald P. Sloteman,et al.  Demonstration Of Cavitation Life Extension For Suction-Stage Impellers In High Energy Pumps , 2004 .

[19]  Simon Bradshaw,et al.  INFLUENCE OF IMPELLER SUCTION SPECIFIC SPEED ON VIBRATION PERFORMANCE , 2013 .

[20]  Warren H. Fraser,et al.  Flow Recirculation In Centrifugal Pumps , 1981 .

[21]  Mehrdad Zangeneh,et al.  On the Coupling of Inverse Design and Optimization Techniques for the Multiobjective, Multipoint Design of Turbomachinery Blades , 2009 .

[22]  T. Simpson,et al.  Use of Kriging Models to Approximate Deterministic Computer Models , 2005 .

[23]  P. Roache.  Verification of Codes and Calculations , 1998 .

[24]  M. D. McKay,et al.  A comparison of three methods for selecting values of input variables in the analysis of output from a computer code , 2000 .

[25]  David Japikse,et al.  A Meanline Model for Impeller Flow Recirculation , 2008 .

[26]  Stephen Spence,et al.  Meanline Modeling of Inlet Recirculation in Automotive Turbocharger Centrifugal Compressors , 2015 .

[27]  Kwang-Yong Kim,et al.  Multi-Objective Optimization of a Passive Micromixer Based on Periodic Variation of Velocity Profile , 2015 .

[28]  Bruno Schiavello.  Cavitation And Recirculation Troubleshooting Methodology , 1993 .

[29]  Akira Goto.  Historical Perspective on Fluid Machinery Flow Optimization in an Industry , 2016 .

[30]  Gary B. Lamont,et al.  Evolutionary Algorithms for Solving Multi-Objective Problems , 2002, Genetic Algorithms and Evolutionary Computation.

[31]  Yoshinobu Tsujimoto,et al.  LES simulation of backflow vortex structure at the inlet of an inducer , 2007 .

[32]  Kalyanmoy Deb,et al.  A fast and elitist multiobjective genetic algorithm: NSGA-II , 2002, IEEE Trans. Evol. Comput..

[33]  Jin-Hyuk Kim,et al.  Multiobjective Optimization of Circumferential Casing Grooves for a Transonic Axial Compressor , 2011 .

[34]  Kosuke Ashihara,et al.  Effects of Blade Loading on Pump Inducer Performance and Flow Fields , 2002 .

[35]  Kenjiro Kamijo,et al.  Improvements of Inducer Inlet Backflow Characteristics Using 3-D Inverse Design Method , 2002 .

[36]  Kwang-Yong Kim,et al.  Three-objective optimization of a centrifugal pump with double volute to minimize radial thrust at off-design conditions , 2016 .

[37]  Andy J. Keane,et al.  Recent advances in surrogate-based optimization , 2009 .

[38]  E. Greitzer.  The Stability of Pumping Systems—The 1980 Freeman Scholar Lecture , 1981 .

[39]  C. Lacor,et al.  Multi-objective optimization of turbomachinery using improved NSGA-II and approximation model , 2011 .

[40]  J. A. Hartigan,et al.  A k-means clustering algorithm , 1979 .

[41]  Christopher E. Brennen,et al.  Hydrodynamics of Pumps , 1995 .