Indian Test Facility (INTF) and its updates

To characterize ITER Diagnostic Neutral Beam (DNB) system with full specification and to support IPR's negative ion beam based neutral beam injector (NBI) system development program, a R&D facility, named INTF is under commissioning phase. Implementation of a successful DNB at ITER requires several challenges need to be overcome. These issues are related to the negative ion production, its neutralization and corresponding neutral beam transport over the path lengths of ~ 20.67 m to reach ITER plasma. DNB is a procurement package for INDIA, as an in-kind contribution to ITER. Since ITER is considered as a nuclear facility, minimum diagnostic systems, linked with safe operation of the machine are planned to be incorporated in it and so there is difficulty to characterize DNB after onsite commissioning. Therefore, the delivery of DNB to ITER will be benefited if DNB is operated and characterized prior to onsite commissioning. INTF has been envisaged to be operational with the large size ion source activities in the similar timeline, as with the SPIDER (RFX, Padova) facility. This paper describes some of the development updates of the facility.

[1]  Sejal Shah,et al.  Design of Data Acquisition and Control System for Indian Test Facility of Diagnostics Neutral Beam , 2015 .

[2]  L. Svensson,et al.  Proposal of actively heated, long stem based Cs delivery system for diagnostic neutral beam source in ITER , 2013 .

[3]  C. Rotti,et al.  Beamline Optimization for 100-keV Diagnostic Neutral Beam Injector for ITER , 2010, IEEE Transactions on Plasma Science.

[4]  Arun Chakraborty,et al.  Negative ion beam extraction in ROBIN , 2013 .

[5]  C. Rotti,et al.  An Indian test facility to characterise diagnostic neutral beam for ITER , 2011 .

[6]  J. Joshi,et al.  Design of vacuum vessel for Indian Test Facility (INTF) for 100 keV neutral beams , 2015 .

[7]  C. Rotti,et al.  Diagnostic neutral beam for ITER - Concept to engineering , 2009, 2009 23rd IEEE/NPSS Symposium on Fusion Engineering.

[8]  C. Rotti,et al.  100-kV feedthrough for the Indian Test Facility (INTF) — design and analysis , 2014 .

[9]  Participant Teams,et al.  ITER: burning plasma physics experiment , 2003 .

[10]  Dass Sudhir,et al.  Overview of ion source characterization diagnostics in INTF. , 2016, The Review of scientific instruments.

[11]  Mainak Bandyopadhyay,et al.  Two RF Driver-Based Negative Ion Source Experiment , 2014, IEEE Transactions on Plasma Science.

[12]  B. Heinemann,et al.  Detailed design of the RF source for the 1 MV neutral beam test facility , 2009 .

[13]  M J Singh,et al.  Physics design of a 100 keV acceleration grid system for the diagnostic neutral beam for international tokamak experimental reactor. , 2010, The Review of scientific instruments.