High-resolution tomography of cracks, voids and micro-structure in greywacke and limestone

Abstract Rocks are commonly very heterogeneous materials. Randomly distributed micro-flaws inside the rock are believed to initiate tensile cracks from which shear fractures develop and coalescence through en echelon interactions leads to fracture. In this paper, we describe the results of applying high-resolution X-ray tomography to samples of greywacke and limestone experimentally deformed under unconfined axial shortening at various loads equivalent to different fractions of the sample strength. Mineral grains, pores, micro-cracks and other voids were imaged with a resolution of 10 μm. 3D image analysis enabled us to monitor the initial state of the samples and the changes in them due to compression. Crack morphology is characterized and compared to the micro-structure of the sample before and after deformation. In the greywacke, formation of a macro-crack ∼10° oblique to the stress direction is observed. It initiated in fine intergranular material at the top tip of the sample and is composed of tensile fractures connected by wing cracks. None of the voids defined in the initial state fractured, and the crack is interpreted to have started either as a micro-crack which was smaller than the resolution of the tomography, or, as a completely new crack. In the limestone, cracks are observed to initiate in features that are too small to be imaged by the tomography, or also in newly created cracks.

[1]  Z. T. Bieniawski,et al.  Brittle fracture propagation in rock under compression , 1965 .

[2]  H. Muraoka,et al.  Three-dimensional shape analysis of miarolitic cavities and enclaves in the Kakkonda granite by X-ray computed tomography , 2001 .

[3]  B. Hennion,et al.  Neutron imaging and neutron tomography as non-destructive tools to study bulk-rock samples , 2002 .

[4]  Gioacchino Viggiani,et al.  Advances in X-ray Tomography for Geomaterials , 2006 .

[5]  E. Schulson,et al.  Wing cracks and brittle compressive fracture , 1990 .

[6]  Herbert H. Einstein,et al.  Fracture coalescence in rock-type materials under uniaxial and biaxial compression , 1998 .

[7]  D. Lockner,et al.  Nucleation and growth of faults in brittle rocks , 1994 .

[8]  George Sines,et al.  Crack extension from flaws in a brittle material subjected to compression , 1978 .

[9]  Philip J.N. Pells.  Uniaxial Strength Testing , 1993 .

[10]  A. Tsuchiyama,et al.  Three-dimensional diffusion of non-sorbing species in porous sandstone: computer simulation based on X-ray microtomography using synchrotron radiation. , 2004, Journal of contaminant hydrology.

[11]  R. Ketcham.  Three-dimensional grain fabric measurements using high-resolution X-ray computed tomography , 2005 .

[12]  Arcady Dyskin,et al.  Influence of shape and locations of initial 3-D cracks on their growth in uniaxial compression , 2003 .

[13]  Eric N. Landis,et al.  Microstructure and fracture in three dimensions , 2003 .

[14]  E. Z. Lajtai.  Brittle fracture in compression , 1974 .

[16]  Ulrich Bonse,et al.  X-ray computed microtomography (μCT) using synchrotron radiation (SR) , 1996 .

[17]  Manabu Takahashi,et al.  In situ visualization of fluid flow image within deformed rock by X-ray CT , 2003 .

[18]  G. Dresen,et al.  Fracture process zone in granite: a microstructural analysis , 2001 .

[19]  S. Stanchits,et al.  Fracture process zone in granite , 2000 .

[20]  R. Holdsworth,et al.  Three-dimensional brittle shear fracturing by tensile crack interaction , 2005, Nature.

[21]  Gioacchino Viggiani,et al.  X-ray micro tomography characterization of strain localization upon deviatoric loading of saturated fine-grained stiff soils , 2004 .

[22]  J. T. Fredrich,et al.  Imaging the Pore Structure of Geomaterials , 1995, Science.

[23]  Eric N. Landis,et al.  X-ray Tomography as a Tool for Micromechanical Investigations of Cement and Mortar , 2010 .

[24]  W. Kinzelbach,et al.  Laboratory visualization of two-phase flow in a natural fracture by neutron tomography , 2003 .

[25]  John A. Hudson,et al.  Comprehensive rock engineering : principles, practice, and projects , 1993 .

[26]  A. A. Griffith.  The Phenomena of Rupture and Flow in Solids , 1921 .

[27]  Johannes Martinus Burgers,et al.  Proceedings of the first International Congress for Applied Mechanics, Delft, 1924 , 1925 .

[28]  Heinrich Riesemeier,et al.  BAMline: the first hard X-ray beamline at BESSY II , 2001 .

[29]  Gioacchino Viggiani,et al.  X‐ray Micro CT for Studying Strain Localization in Clay Rocks under Triaxial Compression , 2010 .

[30]  Sia Nemat-Nasser,et al.  Compression‐induced microcrack growth in brittle solids: Axial splitting and shear failure , 1985 .

[31]  O. Nishizawa,et al.  Quasi‐static fault growth and cracking in homogeneous brittle rock under triaxial compression using acoustic emission monitoring , 2000 .

[32]  R. Brauchler,et al.  Groundwater in Fractured Rocks , 2007 .

[33]  E. Z. Lajtai.  A theoretical and experimental evaluation of the Griffith theory of brittle fracture , 1971 .

[34]  S. Zabler,et al.  High resolution synchrotron-based radiography and tomography using hard X-rays at the BAMline (BESSY II) , 2008 .

[35]  B. Atkinson.  Fracture Mechanics of Rock , 1987 .

[36]  Carl E. Renshaw,et al.  On the initiation of shear faults during brittle compressive failure: A new mechanism , 1999 .

[37]  R. Kranz.  Microcracks in rocks: a review , 1983 .

[38]  D. Lockner,et al.  The role of microcracking in shear-fracture propagation in granite , 1995 .

[39]  C. Scholz.  The Mechanics of Earthquakes and Faulting , 1990 .

[40]  Z. T. Bieniawski,et al.  Mechanism of brittle fracture of rockPart IIexperimental studies , 1967 .

[41]  Arcady Dyskin,et al.  Mechanisms of brittle fracture of rock with pre-existing cracks in compression , 1994 .