Fabrication of W/steel joint using hot isostatic pressing with Ti/Cu/Ti liquid forming interlayer

[1]  Wensheng Liu,et al.  Effect of joining temperature on the microstructure and strength of W–steel HIP joints with Ti/Cu composite interlayer , 2018, Journal of Nuclear Materials.

[2]  C. Liang,et al.  Rational design of composite interlayer for diffusion bonding of tungsten–steel joints , 2018 .

[3]  C. Liang,et al.  Investigation of tungsten/steel diffusion bonding with Ni–Fe cladding on tungsten substrate , 2017 .

[4]  A. Ureña,et al.  Evaluation of mechanically alloyed Cu-based powders as filler alloy for brazing tungsten to a reduced activation ferritic-martensitic steel , 2017 .

[5]  G. Luo,et al.  Effect of Ti interlayer on the bonding quality of W and steel HIP joint , 2017 .

[6]  A. Ureña,et al.  Wettability study of a Cu-Ti alloy on tungsten and EUROFER substrates for brazing components of DEMO fusion reactor , 2016 .

[7]  Di Zhang,et al.  Characterization of the diffusion bonding behavior of pure Ti and Ni with different surface roughness during hot pressing , 2015 .

[8]  A. Miriyev,et al.  Thermal stability and growth kinetics of the interfacial TiC layer in the Ti alloy/carbon steel system , 2014 .

[9]  Wensheng Liu,et al.  Microstructure and mechanical properties of diffusion bonded W/steel joint using V/Ni composite interlayer , 2013 .

[10]  J. Aktaa,et al.  Diffusion bonding between W and EUROFER97 using V interlayer , 2012 .

[11]  A. Ying,et al.  Diffusion bonding beryllium to Reduced Activation Ferritic Martensitic steel: Development of processes and techniques , 2012 .

[12]  S. Antusch,et al.  Progress of He-cooled divertor development for DEMO , 2011 .

[13]  J. Aktaa,et al.  Investigation on the diffusion bonding of tungsten and EUROFER97 , 2011 .

[14]  T. Nagasaka,et al.  Microstructures of brazed and solid-state diffusion bonded joints of tungsten with oxide dispersion strengthened steel , 2011 .

[15]  A. Kohyama,et al.  Effect of joining temperature on the microstructure and strength of tungsten/ferritic steel joints diffusion bonded with a nickel interlayer , 2010 .

[16]  A. Kohyama,et al.  Microstructure and mechanical properties of diffusion bonded joints between tungsten and F82H steel using a titanium interlayer , 2010 .

[17]  A. Kohyama,et al.  Effect of holding time on the microstructure and strength of tungsten/ferritic steel joints diffusion bonded with a nickel interlayer , 2009 .

[18]  V. Widak,et al.  Current status of He-cooled divertor development for DEMO , 2009 .

[19]  R. Ruprecht,et al.  He-cooled divertor development for DEMO , 2007 .

[20]  M. Rohde,et al.  Development of brazing foils to join monocrystalline tungsten alloys with ODS-EUROFER steel , 2007 .

[21]  N. Orhan,et al.  Diffusion bonding between Ti–6Al–4V alloy and ferritic stainless steel , 2007 .

[22]  M. Ghosh,et al.  Effect of interface microstructure on the bond strength of the diffusion welded joints between titanium and stainless steel , 2005 .

[23]  B. Alemán,et al.  Interface microstructures in diffusion bonding of titanium alloys to stainless and low alloy steels , 1993 .

[24]  Lawrence H. Bennett,et al.  Binary alloy phase diagrams , 1986 .