论文信息 - Investigation of Buckling Deformation of Thin Plate Welded Structures

Investigation of Buckling Deformation of Thin Plate Welded Structures

Buckling produced during the assembly process is the most critical mode of welding deformation for the thin plate welded structures. In this study, the behavior of buckling deformation has been investigated utilizing computational welding mechanics. The computational approach consists of two steps; a 3D Thermal-Elastic-Plastic FEA to evaluate inherent deformation, and an elastic analysis based on the Inherent Strain/Deformation Method. Based on the computational results, the phenomenon of buckling deformation can be clearly explained. Using the same method, the line heating process is simulated to control and reduce the welding-induced buckling deformation.

[1] Yukio Ueda,et al. Buckling Behavior of Plates under Idealized Inherent Strain(Mechanics, Strength & Structural Design) , 1995 .

[2] P. Michaleris,et al. Prediction of buckling distortion of welded structures , 2003 .

[3] Pingsha Dong,et al. Fabrication and Engineering Technology for Lightweight Ship Structures, Part 1: Distortions and Residual Stresses in Panel Fabrication , 2004 .

[4] S. Sone,et al. Prediction of Welding Distortion by Elastic Finite Element Analysis using Inherent Deformation Estimated Through Inverse Analysis , 2005 .

[5] Hisashi Serizawa,et al. Actual application of FEM to analysis of large scale mechanical problems in welding , 2007 .

[6] Ninshu Ma,et al. Concept of inherent strain, inherent stress, inherent deformation and inherent force for prediction of welding distortion and residual stress , 2010 .