Micro‐Electro Discharge Machining (µEDM)

[1]  Hisashi Minami,et al.  Coloring Method for Titanium Alloy by Using EDM Process , 1998 .

[2]  T. Masuzawa,et al.  Micro electro-discharge machining and its applications , 1990, IEEE Proceedings on Micro Electro Mechanical Systems, An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots..

[3]  Masanori Kunieda,et al.  Study on nano EDM using capacity coupled pulse generator , 2007 .

[4]  Kamlakar P Rajurkar,et al.  High Aspect Ratio and Complex Shaped Blind Micro Holes by Micro EDM , 2002 .

[5]  Eberhard Bamberg,et al.  Orbital electrode actuation to improve efficiency of drilling micro-holes by micro-EDM , 2009 .

[6]  Chia-Lung Kuo,et al.  Fabrication of series-pattern micro-disk electrode and its application in machining micro-slit of less than 10 μm , 2004 .

[7]  B. Bhattacharyya,et al.  Experimental investigations into electrochemical discharge machining (ECDM) of non-conductive ceramic materials , 1999 .

[8]  Stephen T. Newman,et al.  State of the art electrical discharge machining (EDM) , 2003 .

[9]  B. Schumacher.  After 60 years of EDM the discharge process remains still disputed , 2004 .

[10]  Hans Kurt Tönshoff,et al.  Three-Dimensional Micromachining by Machine Tools , 1997 .

[11]  A. Senthil Kumar,et al.  A multiprocess machine tool for compound micromachining , 2010 .

[12]  Jean-Pierre Kruth,et al.  Real-time Tool Wear Compensation in Milling EDM , 2002 .

[13]  Takahisa Masuzawa,et al.  Improved Jet Flushing for EDM , 1992 .

[14]  Shun-Tong Chen.  Fabrication of high-density micro holes by upward batch micro EDM , 2008 .

[15]  Fu-Chen Chen,et al.  Investigation into some surface characteristics of electrical discharge machined SKD-11 using powder-suspension dielectric oil , 2005 .

[16]  Shahin Rahimifard,et al.  STATE OF THE ART IN WIRE ELECTRICAL DISCHARGE MACHINING (WEDM) , 2004 .

[17]  Mahmudur Rahman,et al.  A study on the machining of high-aspect ratio micro-structures using micro-EDM , 2003 .

[18]  J. Schmidt,et al.  New applications for micro-EDM , 2004 .

[19]  V. Fascio,et al.  Machining of non-conducting materials using electrochemical discharge phenomenon – An overview , 2005 .

[20]  B. Yan,et al.  Study of precision micro-holes in borosilicate glass using micro EDM combined with micro ultrasonic vibration machining , 2002 .

[21]  Yang Wang,et al.  Experimental research on vibration assisted EDM of micro-structures with non-circular cross-section , 2008 .

[22]  Y. Wong,et al.  A study on the quality micro-hole machining of tungsten carbide by micro-EDM process using transistor and RC-type pulse generator , 2009 .

[23]  Shan Xue Chuan,et al.  The effects of electro-discharge machining block electrode method for microelectrode machining , 2002 .

[24]  Y. Wong,et al.  Study of Micro-EDM of Tungsten Carbide with Workpiece Vibration , 2011 .

[25]  Y. Wong,et al.  Investigation of micro-EDM material removal characteristics using single RC-pulse discharges , 2003 .

[26]  Y. Wong,et al.  Near-mirror-finish phenomenon in EDM using powder-mixed dielectric , 1998 .

[27]  Kamlakar P Rajurkar,et al.  3D Micro-EDM Using CAD/CAM , 2000 .

[28]  Rupinder Singh,et al.  Surface modification by electrical discharge machining: A review , 2009 .

[29]  Masanori Kunieda,et al.  Advancing EDM through fundamental insight into the process , 2005 .

[30]  Takayuki Tsujimoto,et al.  Study of vibration-assisted micro-EDM-The effect of vibration on machining time and stability of discharge , 2008 .

[31]  E. Henriques,et al.  Influence of silicon powder-mixed dielectric on conventional electrical discharge machining , 2003 .

[32]  Takahisa Masuzawa,et al.  State of the Art of Micromachining , 2000 .

[33]  Kamlakar P Rajurkar,et al.  Micro and Nano Machining by Electro-Physical and Chemical Processes , 2006 .

[34]  T. Masuzawa,et al.  An index to evaluate the wear resistance of the electrode in micro-EDM , 2004 .

[35]  Kenichi Takahata,et al.  High-aspect-ratio WC-Co microstructure produced by the combination of LIGA and micro-EDM , 2000 .

[36]  S. H. Lee,et al.  Study of the effect of machining parameters on the machining characteristics in electrical discharge machining of tungsten carbide , 2001 .

[37]  Yoke San Wong,et al.  Integrated Hybrid Micro/Nano-Machining , 2007 .

[38]  Mahmudur Rahman,et al.  Tool-based micro-machining , 2007 .

[39]  C. J. Heuvelman,et al.  A self-flushing method with spark-erosion machining , 1983 .

[40]  Jean-Pierre Kruth,et al.  Sensing and compensation of tool wear in milling EDM , 2004 .

[41]  E. Uhlmann,et al.  Machining of micro/miniature dies and moulds by electrical discharge machining—Recent development , 2005 .

[42]  F. Amorim,et al.  The influence of generator actuation mode and process parameters on the performance of finish EDM of a tool steel , 2005 .

[43]  Kimiyuki Mitsui,et al.  A new approach on the determination of ease of machining by EDM processes , 2008 .

[44]  Takahisa Masuzawa,et al.  Surface finishing of micropins produced by WEDG , 2005 .

[45]  Y. Wong,et al.  A study on the fine-finish die-sinking micro-EDM of tungsten carbide using different electrode materials , 2009 .

[46]  F. Altpeter,et al.  Relevant topics in wire electrical discharge machining control , 2004 .

[47]  Duc Truong Pham,et al.  Micro-EDM—recent developments and research issues , 2004 .

[48]  Tsunemoto Kuriyagawa,et al.  Study on shaping spherical Poly Crystalline Diamond tool by Micro-electro-Discharge Machining and micro-grinding with the tool , 2007 .

[49]  R. Ryan Vallance,et al.  Micro-machining and micro-grinding with tools fabricated by micro electro-discharge machining , 2006 .

[50]  Han-Ming Chow,et al.  Micro-hole machining using micro-EDM combined with electropolishing , 2006 .

[51]  Masanori Kunieda,et al.  Improvement of machining characteristics of micro-EDM using transistor type isopulse generator and servo feed control , 2004 .

[52]  Muhammad P. Jahan,et al.  Nanofinishing of hard materials using micro-electrodischarge machining , 2009 .

[53]  F. Klocke,et al.  The effects of powder suspended dielectrics on the thermal influenced zone by electrodischarge machining with small discharge energies , 2004 .

[54]  Takahisa Masuzawa,et al.  Drilling of Deep Microholes by EDM , 1989 .

[55]  Biing-Hwa Yan,et al.  Micro-hole machining of carbide by electric discharge machining , 1999 .

[56]  C. Chu,et al.  Fabrication of multiple electrodes by reverse EDM and their application in micro ECM , 2006 .

[57]  M. Kunieda,et al.  EDM of micro-rods by self-drilled holes , 2004 .

[58]  Masanori Kunieda,et al.  Study on factors determining limits of minimum machinable size in micro EDM , 2005 .

[59]  T. Masuzawa,et al.  Micro-EDM for Three-Dimensional Cavities - Development of Uniform Wear Method - , 1998 .

[60]  Cheng-Kuang Yang,et al.  Improving machining performance of wire electrochemical discharge machining by adding SiC abrasive to electrolyte , 2006 .

[61]  Biing-Hwa Yan,et al.  Using a helical micro-tool in micro-EDM combined with ultrasonic vibration for micro-hole machining , 2006 .

[62]  T. Masuzawa,et al.  Microultrasonic Machining by the Application of Workpiece Vibration , 1999 .