Comparison of Gold Versus Platinum Electrodes on Myocardial Lesion Size Using Radiofrequency Energy

During radiofrequency (RF) catheter ablation of arrhythmias, temperatures that approach 100°C cause a coagulum to form on the ablation electrode that results in an increase in electrical impedance and prevents further energy delivery. Since gold has nearly four times the thermal conductivity as platinum, the metal commonly used, it was postulated that gold tip electrodes could deliver more power and produce deeper lesions because of its greater heat dissipation from the electrodetissue interface to the circulating blood. To test this hypothesis, RF energy was applied to fresh bovine ventricular myocardium using 6 French catheters with 2‐mm long distal electrodes made from gold or platinum. Similar studies were also conducted using 7 French catheters with 4‐mm long distal electrodes. Maximum lesion depth was defined as that produced with the level of energy just below that causing an impedance rise. A maximum lesion depth of 6.2 ± 0.7 mm (mean ± SD) was obtained with the gold 2‐mm electrode and 4.7 ± 0.5 mm with the platinum electrode (P = 0.003). The 4‐mm gold electrode produced a maximum lesion depth of 7.2 ± 1.4 mm, while a catheter with a 4‐mm platinum electrode caused a maximum lesion depth of 5.8 ± 0,7 mm (P = 0.05). We conclude that deeper lesions should be able to be made when RF energy is delivered to a gold rather than platinum tip electrode.

[1]  D D Watson,et al.  Tissue Heating During Radiofrequency Catheter Ablation: A Thermodynamic Model and Observations in Isolated Perfused and Superfused Canine Right Ventricular Free Wall , 1989, Pacing and clinical electrophysiology : PACE.

[2]  D. Haines,et al.  Observations on electrode-tissue interface temperature and effect on electrical impedance during radiofrequency ablation of ventricular myocardium. , 1990, Circulation.

[3]  R Lazzara,et al.  Comparison of in vivo tissue temperature profile and lesion geometry for radiofrequency ablation with a saline-irrigated electrode versus temperature control in a canine thigh muscle preparation. , 1995, Circulation.

[4]  F I Marcus,et al.  The Effect of Electrode Design on the Efficiency of Delivery of Radiofrequency Energy to Cardiac Tissue In Vitro , 1989, Pacing and clinical electrophysiology : PACE.

[5]  J. Hare,et al.  Physics and engineering of transcatheter cardiac tissue ablation. , 1993, Journal of the American College of Cardiology.

[6]  A. Graham,et al.  Determinants of Impedance Rise During Catheter Ablation of Bovine Myocardium with Radiofrequency Energy , 1989, Pacing and clinical electrophysiology : PACE.

[7]  R N Hauer,et al.  Control of radiofrequency lesion size by power regulation. , 1989, Circulation.

[8]  D D Watson,et al.  Electrode radius predicts lesion radius during radiofrequency energy heating. Validation of a proposed thermodynamic model. , 1990, Circulation research.

[9]  J. Langberg,et al.  Temperature‐Guided Radiofrequency Catheter Ablation With Very Large Distal Electrodes , 1993, Circulation.

[10]  P. Liley,et al.  Thermal Conductivity of the Elements: A Comprehensive Review , 1974 .

[11]  K. Kuck,et al.  Catheter Ablation of Atrioventricular Junction Using Radiofrequency Current in 17 Patients: Comparison of Standard and Large‐Tip Catheter Electrodes , 1991, Circulation.

[12]  G. L. Gardner,et al.  Molten salts: Volume 4, part 2, chlorides and mixtures—electrical conductance, density, viscosity, and surface tension data , 1974 .