A self-stabilized suspension catholyte to enable long-term stable Li–S flow batteries

Lithium–sulfur suspension flow batteries are a promising technology for large-scale energy storage, but long-term stability of the suspension catholyte is urgently needed for future application of this system. Here a special self-stabilized suspension catholyte is designed and prepared based on a pie-structured sulfur-Ketjenblack@reduced graphene oxide (S-KB@rGO) composite. In the S-KB@rGO suspension, the sulfur nanoparticles are loaded onto the conductive KB by an in situ redox reaction; the special hyperbranched structure of KB enhances the stability of the suspension; rGO sheets which wrap the S-KB particles not only act as a multilayered physical barrier for sulfur immobilization, but also facilitate electron transportation in the whole suspension. Therefore, a suspension catholyte with long-term physical and electrochemical stability is achieved by the synergetic effect of the KB and rGO. Li–S flow cells with this catholyte show excellent cycle stability (more than 1000 cycles with 99% coulombic efficiency) and low self-discharge (1.1% loss per day). Continuous charge/discharge tests in different flow modes are performed and the influence of the flow rate on the flow battery performance is discussed. The smooth operation in long-lasting flow mode further demonstrates the stability of the suspension catholyte.

[1]  Hong‐Jie Peng,et al.  Healing High-Loading Sulfur Electrodes with Unprecedented Long Cycling Life: Spatial Heterogeneity Control. , 2017, Journal of the American Chemical Society.

[2]  X. Lou,et al.  A sulfur host based on titanium monoxide@carbon hollow spheres for advanced lithium–sulfur batteries , 2016, Nature Communications.

[3]  Xiaoxiao Huang,et al.  3D Vertically Aligned and Interconnected Porous Carbon Nanosheets as Sulfur Immobilizers for High Performance Lithium‐Sulfur Batteries , 2016 .

[4]  Gareth H. McKinley,et al.  A low-dissipation, pumpless, gravity-induced flow battery , 2016 .

[5]  Yitai Qian,et al.  A graphene oxide-wrapped bipyramidal sulfur@polyaniline core–shell structure as a cathode for Li–S batteries with enhanced electrochemical performance , 2016 .

[6]  Yi-Chun Lu,et al.  A High‐Energy‐Density Multiple Redox Semi‐Solid‐Liquid Flow Battery , 2016 .

[7]  Qi Li,et al.  Progress in electrolytes for rechargeable Li-based batteries and beyond , 2016 .

[8]  X. Lou,et al.  Double-Shelled Nanocages with Cobalt Hydroxide Inner Shell and Layered Double Hydroxides Outer Shell as High-Efficiency Polysulfide Mediator for Lithium-Sulfur Batteries. , 2016, Angewandte Chemie.

[9]  J. Janek,et al.  Tuning Transition Metal Oxide–Sulfur Interactions for Long Life Lithium Sulfur Batteries: The “Goldilocks” Principle , 2016 .

[10]  Yutao Li,et al.  A chemistry and material perspective on lithium redox flow batteries towards high-density electrical energy storage. , 2015, Chemical Society reviews.

[11]  Xingbo Liu,et al.  Nano-porous sulfur-polyaniline electrodes for lithium-sulfurbatteries , 2015 .

[12]  Jian Jiang,et al.  Encapsulation of sulfur with thin-layered nickel-based hydroxides for long-cyclic lithium–sulfur cells , 2015, Nature Communications.

[13]  G. Soloveichik.  Flow Batteries: Current Status and Trends. , 2015, Chemical reviews.

[14]  Bing Sun,et al.  Multi-chambered micro/mesoporous carbon nanocubes as new polysulfides reserviors for lithium–sulfur batteries with long cycle life , 2015 .

[15]  Gareth H. McKinley,et al.  Biphasic Electrode Suspensions for Li‐Ion Semi‐solid Flow Cells with High Energy Density, Fast Charge Transport, and Low‐Dissipation Flow , 2015 .

[16]  Y. Gogotsi,et al.  Synthesis of carbon/sulfur nanolaminates by electrochemical extraction of titanium from Ti₂SC. , 2015, Angewandte Chemie.

[17]  J. Tu,et al.  Sulfur/three-dimensional graphene composite for high performance lithium–sulfur batteries , 2015 .

[18]  Yi-Chun Lu,et al.  Sulphur-impregnated flow cathode to enable high-energy-density lithium flow batteries , 2015, Nature Communications.

[19]  Zengsheng Ma,et al.  Sulfur-Nickel Foam as Cathode Materials for Lithium-Sulfur Batteries , 2014 .

[20]  Victor E. Brunini,et al.  Electroactive-Zone Extension in Flow-Battery Stacks , 2014 .

[21]  Zhe Yuan,et al.  Hierarchical Free‐Standing Carbon‐Nanotube Paper Electrodes with Ultrahigh Sulfur‐Loading for Lithium–Sulfur Batteries , 2014 .

[22]  Donald R. Sadoway,et al.  Lithium–antimony–lead liquid metal battery for grid-level energy storage , 2014, Nature.

[23]  A. Manthiram,et al.  Bifunctional Separator with a Light‐Weight Carbon‐Coating for Dynamically and Statically Stable Lithium‐Sulfur Batteries , 2014 .

[24]  Arumugam Manthiram,et al.  Rechargeable lithium-sulfur batteries. , 2014, Chemical reviews.

[25]  Bing Sun,et al.  Dual protection of sulfur by carbon nanospheres and graphene sheets for lithium-sulfur batteries. , 2014, Chemistry.

[26]  Ming Jia,et al.  Nickel foam as interlayer to improve the performance of lithium–sulfur battery , 2014, Journal of Solid State Electrochemistry.

[27]  Gareth H McKinley,et al.  Polysulfide flow batteries enabled by percolating nanoscale conductor networks. , 2014, Nano letters.

[28]  P. Shen,et al.  Sulfur-infiltrated three-dimensional graphene-like material with hierarchical pores for highly stable lithium–sulfur batteries , 2014 .

[29]  C. Fisher,et al.  Lithium and sodium battery cathode materials: computational insights into voltage, diffusion and nanostructural properties. , 2014, Chemical Society reviews.

[30]  A. Manthiram,et al.  A strategic approach to recharging lithium-sulphur batteries for long cycle life , 2013, Nature Communications.

[31]  Yingchao Yu,et al.  Yolk-shell structure of polyaniline-coated sulfur for lithium-sulfur batteries. , 2013, Journal of the American Chemical Society.

[32]  Sally M. Benson,et al.  The energetic implications of curtailing versus storing solar- and wind-generated electricity , 2013 .

[33]  Li Li,et al.  Graphene-based three-dimensional hierarchical sandwich-type architecture for high-performance Li/S batteries. , 2013, Nano letters.

[34]  Jung Tae Lee,et al.  Sulfur‐Infiltrated Micro‐ and Mesoporous Silicon Carbide‐Derived Carbon Cathode for High‐Performance Lithium Sulfur Batteries , 2013, Advanced materials.

[35]  Haoshen Zhou,et al.  Towards sustainable and versatile energy storage devices: an overview of organic electrode materials , 2013 .

[36]  Jie Liu,et al.  Significantly improved long-cycle stability in high-rate Li-S batteries enabled by coaxial graphene wrapping over sulfur-coated carbon nanofibers. , 2013, Nano letters.

[37]  Guangyuan Zheng,et al.  A membrane-free lithium/polysulfide semi-liquid battery for large-scale energy storage , 2013 .

[38]  A. Manthiram,et al.  In Charge of the World: Electrochemical Energy Storage. , 2013, The journal of physical chemistry letters.

[39]  Jun Liu,et al.  Materials Science and Materials Chemistry for Large Scale Electrochemical Energy Storage: From Transportation to Electrical Grid , 2013 .

[40]  Jiaqi Huang,et al.  Graphene/single-walled carbon nanotube hybrids: one-step catalytic growth and applications for high-rate Li-S batteries. , 2012, ACS nano.

[41]  Bin Li,et al.  Recent Progress in Redox Flow Battery Research and Development , 2012 .

[42]  Jun Liu,et al.  A Soft Approach to Encapsulate Sulfur: Polyaniline Nanotubes for Lithium‐Sulfur Batteries with Long Cycle Life , 2012, Advanced materials.

[43]  B. Dunn,et al.  Electrical Energy Storage for the Grid: A Battery of Choices , 2011, Science.

[44]  Maria Skyllas-Kazacos,et al.  Progress in Flow Battery Research and Development , 2011 .

[45]  Victor E. Brunini,et al.  Semi‐Solid Lithium Rechargeable Flow Battery , 2011 .

[46]  Xiulei Ji,et al.  Stabilizing lithium-sulphur cathodes using polysulphide reservoirs. , 2011, Nature communications.

[47]  Jun Liu,et al.  Electrochemical energy storage for green grid. , 2011, Chemical reviews.

[48]  Rajib Ghosh Chaudhuri,et al.  Synthesis of sulfur nanoparticles in aqueous surfactant solutions. , 2010, Journal of colloid and interface science.

[49]  Mark Z. Jacobson,et al.  Review of solutions to global warming, air pollution, and energy security , 2009 .

[50]  G. Wallace,et al.  Processable aqueous dispersions of graphene nanosheets. , 2008, Nature nanotechnology.

[51]  C. Ponce de León,et al.  Redox flow cells for energy conversion , 2006 .

[52]  B. Jung,et al.  Effect of cathode component on the energy density of lithium–sulfur battery , 2004 .

[53]  Gerbrand Ceder,et al.  Ab initio study of lithium intercalation in metal oxides and metal dichalcogenides , 1997 .

[54]  D. Macfarlane,et al.  Co3O4 nanoneedle arrays as a multifunctional “super-reservoir” electrode for long cycle life Li–S batteries , 2017 .

[55]  Jiulin Wang,et al.  Sulfur‐Based Composite Cathode Materials for High‐Energy Rechargeable Lithium Batteries , 2015, Advanced materials.

[56]  Hong‐Jie Peng,et al.  Interconnected carbon nanotube/graphene nanosphere scaffolds as free-standing paper electrode for high-rate and ultra-stable lithium-sulfur batteries , 2015 .

[57]  Yunhui Huang,et al.  Macroporous free-standing nano-sulfur/reduced graphene oxide paper as stable cathode for lithium-sulfur battery , 2015 .

[58]  Guangmin Zhou,et al.  A Graphene–Pure‐Sulfur Sandwich Structure for Ultrafast, Long‐Life Lithium–Sulfur Batteries , 2014, Advanced materials.

[59]  Kyle C. Smith,et al.  Maximizing Energetic Efficiency in Flow Batteries Utilizing Non-Newtonian Fluids , 2014 .

[60]  Pierre-Louis Taberna,et al.  Non-Aqueous Li-Based Redox Flow Batteries , 2012 .