Development of a MEMS device for acoustic emission testing

Acoustic emission testing is an important technology for evaluating structural materials, and especially for detecting damage in structural members. Significant new capabilities may be gained by developing MEMS transducers for acoustic emission testing, including permanent bonding or embedment for superior coupling, greater density of transducer placement, and a bundle of transducers on each device tuned to different frequencies. Additional advantages include capabilities for maintenance of signal histories and coordination between multiple transducers. We designed a MEMS device for acoustic emission testing that features two different mechanical types, a hexagonal plate design and a spring-mass design, with multiple detectors of each type at ten different frequencies in the range of 100 kHz to 1 MHz. The devices were fabricated in the multi-user polysilicon surface micromachining (MUMPs) process and we have conducted electrical characterization experiments and initial experiments on acoustic emission detection. We first report on C(V) measurements and perform a comparison between predicted (design) and measured response. We next report on admittance measurements conducted at pressures varying from vacuum to atmospheric, identifying the resonant frequencies and again providing a comparison with predicted performance. We then describe initial calibration experiments that compare the performance of the detectors to other acoustic emission transducers, and we discuss the overall performance of the device as a sensor suite, as contrasted to the single-channel performance of most commercial transducers.

[1]  Butrus T. Khuri-Yakub,et al.  The microfabrication of capacitive ultrasonic transducers , 1998 .

[2]  F. R. Breckenridge,et al.  Surface‐wave displacement: Absolute measurements using a capacitive transducer , 1981 .

[3]  Butrus T. Khuri-Yakub,et al.  Fabrication and characterization of surface micromachined capacitive ultrasonic immersion transducers , 1999 .

[4]  J. Wibbeler,et al.  Frequency selective sensor arrays for vibration measurement , 2002, Proceedings of IEEE Sensors.

[5]  Siu Wing Or,et al.  P(VDF-TrFE) copolymer acoustic emission sensors , 2000 .

[6]  P. Marin-Franch,et al.  PTCa/PEKK piezo-composites for acoustic emission detection , 2002 .

[7]  P Cawley,et al.  Design of a self-calibrating simulated acoustic emission source. , 2000, Ultrasonics.

[8]  Yung-Chun Lee,et al.  Miniature conical transducer realized by excimer laser micro-machining technique , 2001 .

[9]  I. Ladabaum,et al.  The microfabrication of capacitive ultrasonic transducers , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[10]  D.A. Hutchins,et al.  Micromachined ultrasonic capacitance transducers for immersion applications , 1998, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[11]  D. Greve,et al.  Electrical characterization of coupled and uncoupled MEMS ultrasonic transducers , 2003, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[12]  Thomas M. Proctor,et al.  An improved piezoelectric acoustic emission transducer , 1982 .

[13]  Arthur W. Leissa,et al.  Vibration of Plates , 2021, Solid Acoustic Waves and Vibration.

[14]  Barry E. Jones,et al.  A self-calibrating piezoelectric transducer with integral sensor for in situ energy calibration of acoustic emission , 2002 .