Morphology, thermal and mechanical properties of extruded injection molded kenaf fiber reinforced polypropylene composites

The aim of this study is to explore the effect of coupling agent and surface treatment of natural fibers on the correlations among structural, thermal and mechanical behavior of injection molded composites. Polypropylene (PP)-based composites reinforced with kenaf fiber as a biodegradable filler were fabricated. Kenaf composites were prepared by adding 10, 20, 30, and 40 wt% of kenaf fibers into the matrix using melt mixing and injection molding considered as a simple, scalable, conventional, and efficient process, that is. Different concentrations of NaOH were applied to modify kenaf fibers. The scanning electron microscope (SEM), Fourier Transform Infrared (FTIR), and x-ray Diffraction (XRD) analysis were conducted in order to find the optimum concentration of NaOH for the chemical treatment and to study the morphology of the fabricated specimens. Maleic anhydride polypropylene (MAPP) was employed as the coupling agent. Moreover, the tensile, flexural and impact tests were conducted to evaluate the mechanical properties of the specimens. Results showed that by the incorporation of kenaf fibers of up to 40 wt%, the tensile and flexural strength significantly improved by 100% and 120%, respectively, with respect to those exhibited by the neat PP. It was shown however that the impact strength decreased by around 18%. Moreover, the results of thermal analysis using the differential scanning calorimetry (DSC) showed that the addition of kenaf fibers into the PP matrix increases the melting and crystallization temperature, and the degree of crystallinity. The XRD analysis of composites further confirmed the influence of fibers on the PP crystallization behavior. The results of this work can further extend the use of natural fiber-reinforced PP composites for structural applications such as automotive interior parts.

[1]  Polat Şendur,et al.  Review of the main factors controlling the fracture toughness and impact strength properties of natural composites , 2018, Materials Research Express.

[2]  Sivakumar Dhar Malingam,et al.  The static and dynamic mechanical properties of kenaf/glass fibre reinforced hybrid composites , 2018, Materials Research Express.

[3]  K. Vignesh.  Mercerization treatment parameter effect on coir fiber reinforced polymer matrix composite , 2018, Materials Research Express.

[4]  R. Arjmandi,et al.  Effects of ammonium polyphosphate content on mechanical, thermal and flammability properties of kenaf/polypropylene and rice husk/polypropylene composites , 2017 .

[5]  Xiaotao Zhu,et al.  Effect of MWCNTs-GO hybrids on tribological performance of hybrid PTFE/Nomex fabric/phenolic composite , 2017 .

[6]  Rashmi Walvekar,et al.  Mechanical and thermal properties of polylactic acid composites reinforced with cellulose nanoparticles extracted from kenaf fibre , 2016 .

[7]  K. Sakka,et al.  Structural changes and enzymatic response of Napier grass (Pennisetum purpureum) stem induced by alkaline pretreatment. , 2016, Bioresource technology.

[8]  Mohamad Ridzwan Ishak,et al.  Effect of Alkali and Silane Treatments on Mechanical and Fibre-matrix Bond Strength of Kenaf and Pineapple Leaf Fibres , 2016 .

[9]  S. Siengchin,et al.  Polypropylene/hemp woody core fiber composites: Morphology, mechanical, thermal properties, and water absorption behaviors , 2016 .

[10]  Z. M. Mohd Ishak,et al.  Starch-grafted-polypropylene/kenaf fibres composites. Part 2: thermal stability and dynamic-mechanical response , 2015 .

[11]  S. M. Sapuan,et al.  Influence of fiber content on mechanical, morphological and thermal properties of kenaf fibers reinforced poly(vinyl chloride)/thermoplastic polyurethane poly-blend composites , 2014 .

[12]  D. Bhattacharyya,et al.  Factorial study of material and process parameters on the mechanical properties of extruded kenaf fibre/polypropylene composite sheets , 2014 .

[13]  S. Rasulova.  Coloring Powder Compositions are Universal Dyes for Dyeing Natural and Synthetic Fibers as Well as Textile Materials based on Them , 2014 .

[14]  K. Kalaitzidou,et al.  Formation of a complex constrained region at the graphite nanoplatelets-polyamide 12 interface , 2013 .

[15]  A. Błędzki,et al.  Biocomposites reinforced with natural fibers: 2000–2010 , 2012 .

[16]  Ahmad Monshi,et al.  Modified Scherrer Equation to Estimate More Accurately Nano-Crystallite Size Using XRD , 2012 .

[17]  S. Han,et al.  Understanding the Reinforcing Mechanisms in Kenaf Fiber/PLA and Kenaf Fiber/PP Composites: A Comparative Study , 2012 .

[18]  A. Dufresne,et al.  Extraction, preparation and characterization of cellulose fibres and nanocrystals from rice husk , 2012 .

[19]  T. Tan,et al.  Effects of Natural Fiber Surface Modification on Mechanical Properties of Poly(lactic acid) (PLA)/Sweet Sorghum Fiber Composites , 2011 .

[20]  Z. Ishak,et al.  Water absorption and dimensional stability of short kenaf fiber‐filled polypropylene composites treated with maleated polypropylene , 2011 .

[21]  Aidy Ali,et al.  The effect of processing parameters on the mechanical properties of kenaf fibre plastic composite , 2011 .

[22]  S. M. Sapuan,et al.  Water Retention in Kenaf/Polypropylene Composites due to Repeated Immersion and Drying Conditions , 2011 .

[23]  A. Khalina,et al.  Rheological Behaviour of Polypropylene/Kenaf Fibre Composite: Effect of Fibre Size , 2011 .

[24]  R. Pucha,et al.  Effect of Interphase Modulus and Nanofiller Agglomeration on the Tensile Modulus of Graphite Nanoplatelets and Carbon Nanotube Reinforced Polypropylene Nanocomposites , 2010 .

[25]  Majid Davoodi Makinejad,et al.  Characteristics of nanofibers extracted from kenaf core , 2010, BioResources.

[26]  M. Misra,et al.  Natural, Fibers, Biopolymers and Biocomposites , 2009 .

[27]  Byoungho Lee,et al.  Fabrication of long and discontinuous natural fiber reinforced polypropylene biocomposites and their mechanical properties , 2009 .

[28]  Shinji Ochi,et al.  Mechanical properties of kenaf fibers and kenaf/PLA composites , 2008 .

[29]  P. Askeland,et al.  The nucleating effect of exfoliated graphite nanoplatelets and their influence on the crystal structure and electrical conductivity of polypropylene nanocomposites , 2008 .

[30]  A. Sanadi,et al.  Instrumented Impact Testing of Kenaf Fiber Reinforced Polypropylene Composites: Effects of Temperature and Composition , 2007 .

[31]  L. Drzal,et al.  Mechanical properties and morphological characterization of exfoliated graphite–polypropylene nanocomposites , 2007 .

[32]  Shinichi Shibata,et al.  Lightweight laminate composites made from kenaf and polypropylene fibres , 2006 .

[33]  Manjusri Misra,et al.  Influence of processing methods and fiber length on physical properties of kenaf fiber reinforced soy based biocomposites , 2007 .

[34]  Y. Nien,et al.  Isothermal crystallization of isotactic polypropylene blended with low molecular weight atactic polypropylene. Part I. Thermal properties and morphology development , 2005 .

[35]  G. Michler,et al.  Molecular deformation mechanisms of isotactic polypropylene in α‐ and β‐crystal forms by FTIR spectroscopy , 2004 .

[36]  T. Hirotsu,et al.  Preparation and characteristics of composites of high‐crystalline cellulose with polypropylene: Effects of maleated polypropylene and cellulose content , 2003 .

[37]  Y. Mai,et al.  Structural properties and mechanical behavior of injection molded composites of polypropylene and sisal fiber , 2002 .

[38]  D. Jiang,et al.  Pinning effect of SiC particles on mechanical properties of Al2O3–SiC ceramic matrix composites , 1998 .

[39]  G. Springer,et al.  The Effects of Crystallinity on the Mechanical Properties of PEEK Polymer and Graphite Fiber Reinforced PEEK , 1987 .