Processing and characterization of impregnated diamond cutting tools using a ferrous metal matrix

Abstract Impregnated diamond cutting tools are processed by powder metallurgy techniques. In these tools, diamonds are used as abrasive particles embedded into a metal matrix. Some common examples of these tools are diamond cutting discs, crowns, drills, and beads of diamond wires—the last is taken as the object of this study. The diamond beads were processed by powder metallurgy, using as metal matrix the system Fe–Cu, with addition of 1% weight of SiC. After sintering, a study of structural and micro-structural analyses was conducted. Brinell hardness and compressive tests were carried out in the metal matrix, as well as the wear resistance of the diamond composites and processed diamond beads. The importance of employing coated diamonds is also commented upon. Results show that Fe–Cu based bonds may probably be used in diamond tools for marble cutting.

[1]  Joel S. Hirschhorn,et al.  Introduction to powder metallurgy , 1969 .

[2]  G. Biasco.  Diamond wire for quarrying hard rocks , 1993 .

[3]  M. Filgueira,et al.  In situ diamond wires: Part II. The bronze 4 wt.% diamond composite cutting rope , 2003 .

[4]  K. Vadasdi,et al.  Process and equipment for electrochemical etching of diamond-containing Co-Wc tools and recovery of diamond from used steel tools , 1996 .

[5]  R. Oberacker,et al.  An introduction to powder metallurgy , 1993 .

[6]  M. Filgueira,et al.  Processing of Diamond Composites for Cutting Tools by Powder Metallurgy and Rotary Forging , 2003 .

[7]  F. Castro,et al.  Consolidation of diamond tools using Cu–Co–Fe based alloys as metallic binders , 2001 .

[8]  G. Petzow,et al.  Basic Mechanisms of Liquid Phase Sintering , 1990 .

[9]  T. Mashimo,et al.  Metastable BCC and FCC alloy bulk bodies in Fe–Cu system prepared by mechanical alloying and shock compression , 1999 .

[10]  A. Okada,et al.  Defect structure development in a pure iron and dilute iron alloys irradiated with neutrons and electrons , 1999 .

[11]  I. E. Clark,et al.  Cobalite HDR: a new prealloyed matrix powder for diamond construction tools , 2002 .

[12]  G. Weber,et al.  DIAMIX : A family of bonds based on DIABASE-V21 , 2005 .

[13]  V. Silva,et al.  On the Compacting of Powders of the Systems Fe-Cu and Fe-Cu-Diamond , 2005 .

[14]  M. Filgueira,et al.  In situ diamond wires: Part I. The Cu–15 vol.% Nb high strength cable , 2002 .

[15]  H. Baker,et al.  Alloy phase diagrams , 1992 .

[16]  K. Lu,et al.  Tensile properties of copper with nano-scale twins , 2005 .

[17]  H. K. Tönshoff,et al.  Investigations and Prediction of Diamond Wear when Sawing , 1986 .

[18]  M. Pinzari,et al.  Quarrying stone by diamond wire in Italy , 1983 .

[19]  Alfredo Caro,et al.  Thermodynamics of Fe–Cu alloys as described by a classic potential , 2006 .