Switchable bandpass filter with two-state frequency responses

A novel switchable bandpass filter with two-state frequency responses is presented, where dual-band bandpass and single bandpass characteristics can be conveniently switched by turning pin diodes on and off. The switchability results from the effect of different working modes. The filter can work as a dual-band bandpass filter obtaining two centre frequencies, 1.8 and 3.5 GHz, which could be appropriately used for GSM and WiMax systems. In the meantime, it also can operate only at 3.5 GHz, rejecting signal at 1.8 GHz. The proposed filter consists of two dual-mode resonators, using pin diodes to switch the frequency responses. An experiment was carried out to validate the design concept, and the measured results agree well with simulated results.

[1]  Chao-Hsiung Tseng,et al.  A New Dual-Band Microstrip Bandpass Filter Using Net-Type Resonators , 2010, IEEE Microwave and Wireless Components Letters.

[2]  Ming-Yao Xia,et al.  Dual-Band Bandpass Filter Using Parallel Short-Ended Feed Scheme , 2010, IEEE Microwave and Wireless Components Letters.

[3]  Xiu Yin Zhang,et al.  Novel Dual-Mode Dual-Band Filters Using Coplanar-Waveguide-Fed Ring Resonators , 2007, IEEE Transactions on Microwave Theory and Techniques.

[4]  Quan Xue,et al.  Novel Balanced Dual-Band Bandpass Filter Using Coupled Stepped-Impedance Resonators , 2010, IEEE Microwave and Wireless Components Letters.

[5]  I.C. Hunter,et al.  Electronically Reconfigurable Microwave Bandpass Filter , 2009, IEEE Transactions on Microwave Theory and Techniques.

[6]  Wen-Hua Tu.  Compact Low-Loss Reconfigurable Bandpass Filter With Switchable Bandwidth , 2010, IEEE Microwave and Wireless Components Letters.