Gas sensing properties of a composite composed of electrospun poly(methyl methacrylate) nanofibers and in situ polymerized polyaniline

Abstract Poly(methyl methacrylate) (PMMA) nanofibers with different diameters were fabricated by electrospinning and their composites with polyaniline (PANI) were formed by virtue of in situ solution polymerization. The coaxial composite nanofibers so prepared were then transferred to the surface of a gold interdigitated electrode to construct a gas sensor. The structure and morphology of the PANI/PMMA composite fibers were characterized by UV–vis spectroscopy and scanning electron microscopy, which indicated that the coaxial nanofibres of PANI emeraldine salt and PMMA were successfully prepared. The electrical responses of the gas sensor based on the composite nanofibres towards triethylamine (TEA) vapors were investigated at room temperature. It was revealed that the sensor showed a sensing magnitude as high as 77 towards TEA vapor of 500 ppm. In addition, the responses were linear, reversible and reproducible towards TEA vapors ranging from 20 to 500 ppm. The diameters of the electrospun PMMA fibers had an effect on the sensing magnitude of the gas sensor, which is proposed to relate to the difference in the surface-to-volume ratio of the fibers. Furthermore, it was found that the concentration of doping acids only led to changes in resistance of the sensor, but could not affect its sensing characteristics. In contrast, the nature of the doping acids was determinative for the sensing magnitude of the sensor. The gas sensor with toluene sulfonic acid as the doping acid exhibited the highest sensing magnitude, which is explained by taking into account of the sensing mechanism and the interactions of doping acids with TEA vapor.

[1]  Fabienne Poncin-Epaillard,et al.  Polyaniline as a new sensitive layer for gas sensors , 2003 .

[2]  Anuvat Sirivat,et al.  Polyaniline/polyimide blends as gas sensors and electrical conductivity response to CO-N2 mixtures , 2005 .

[3]  Ke Xu,et al.  A peculiar cyclic voltammetric behavior of polyaniline in acetonitrile and its application in ammonia vapor sensor , 2007 .

[4]  K. L. Tan,et al.  Enhancement of Growth and Adhesion of Electroactive Polymer Coatings on Polyolefin Substrates , 1998 .

[5]  Jayant Kumar,et al.  Electrospun Nanofibrous Membranes for Highly Sensitive Optical Sensors , 2002 .

[6]  G. Shi,et al.  Electrosynthesis of polypyrrole/sulfonated polyaniline composite films and their applications for ammonia gas sensing , 2007 .

[7]  Idalia Ramos,et al.  Electric response of isolated electrospun polyaniline nanofibers to vapors of aliphatic alcohols , 2008 .

[8]  Younan Xia,et al.  Highly porous fibers by electrospinning into a cryogenic liquid. , 2006, Journal of the American Chemical Society.

[9]  P. Ajayan,et al.  Preparation of biopolymer fibers by electrospinning from room temperature ionic liquids. , 2006, Biomacromolecules.

[10]  Duk-Dong Lee,et al.  Sensing behaviors of polypyrrole sensor under humidity condition , 2005 .

[11]  N. V. Hulst,et al.  Beaded Electrospun Fibers for Photonic Applications , 2005 .

[12]  Jaewon Yoon,et al.  Colorimetric sensors for volatile organic compounds (VOCs) based on conjugated polymer-embedded electrospun fibers. , 2007, Journal of the American Chemical Society.

[13]  M. Matsuguchi,et al.  Effect of NH3 gas on the electrical conductivity of polyaniline blend films , 2002 .

[14]  S. Ramakrishna,et al.  A review on electrospinning design and nanofibre assemblies , 2006, Nanotechnology.

[15]  Ke Xu,et al.  Effects of dopants on percolation behaviors and gas sensing characteristics of polyaniline film , 2006 .

[16]  Andreas Greiner,et al.  Compound Core–Shell Polymer Nanofibers by Co‐Electrospinning , 2003 .

[17]  Andreas Greiner,et al.  Nanostructured Fibers via Electrospinning , 2001 .

[18]  J. Vacanti,et al.  A biodegradable nanofiber scaffold by electrospinning and its potential for bone tissue engineering. , 2003, Biomaterials.

[19]  Jun Kameoka,et al.  Polymeric Nanowire Chemical Sensor , 2004 .

[20]  Ting Zhang,et al.  Electrochemically Functionalized Single‐Walled Carbon Nanotube Gas Sensor , 2006 .

[21]  Yang Li,et al.  A composite of polyelectrolyte-grafted multi-walled carbon nanotubes and in situ polymerized polyaniline for the detection of low concentration triethylamine vapor , 2008, Nanotechnology.

[22]  Richard B. Kaner,et al.  Polyaniline Nanofiber Gas Sensors: Examination of Response Mechanisms , 2004 .

[23]  Xinhua Xu,et al.  ELECTROSPUN POLY (VINYL ALCOHOL)/GLUCOSE OXIDASE BIOCOMPOSITE MEMBRANES FOR BIOSENSOR APPLICATIONS , 2006 .

[24]  Younan Xia,et al.  Direct Fabrication of Composite and Ceramic Hollow Nanofibers by Electrospinning , 2004 .

[25]  Ping Wang,et al.  Enzyme‐Carrying Polymeric Nanofibers Prepared via Electrospinning for Use as Unique Biocatalysts , 2002, Biotechnology progress.

[26]  Yen Wei,et al.  In situ encapsulation of horseradish peroxidase in electrospun porous silica fibers for potential biosensor applications. , 2006, Nano letters.

[27]  M. Jayakannan,et al.  Synthesis and characterization of new azobenzenesulfonic acids doped conducting polyaniline , 2006 .

[28]  G. Titelman,et al.  Polyaniline−Dodecylbenzene Sulfonic Acid Polymerized from Aqueous Medium: A Solid State NMR Characterization , 1999 .

[29]  Jian Gong,et al.  Preparation of Polyaniline Nanotubes via “Thin Glass Tubes Template” Approach and its Gas Response , 2007 .