The virtual node polygonal element method for nonlinear thermal analysis with application to hybrid laser welding

The nonlinear heat transfer process occurring during hybrid laser welding was simulated using the Virtual-node Polygonal Element (VPE) method within the framework of the Finite Element Method (FEM). To achieve robustness in large-scale welding simulations, a dynamic mesh refinement with quadtree and octree data structures was used in the welding region. Accuracy, convergence and efficiency were verified by solving two and three dimensional problems. It is found that the present VPE can successfully simulate the hybrid laser welding process with good accuracy and convergence. The adaptive refined mesh box can synchronously move with the welding heat source, which dramatically reduces the number of field nodes. Compared with the standard FEM,the VPEM requires only approximately 42% of the total degrees of freedom used in standard FEM for the same accuracy. Furthermore, we compare the computational cost and accuracy of the method to that of the finite element method, the edge based virtual node polygonal element/virtual node method, the edge-based Smoothed Point Interpolation Meshless Method (ES-PIM), the edge-based Element (ES-PIM) the Element Free Galerkin (EFG) method and the Meshless Local Petrove-Galerkin Petrov–Galerkin (MLPG) method. Compared to all those methods, the proposed scheme is found competitive in terms of computational cost versus accuracy, and benefit from a simple implementation.

[1]  Guirong Liu.  A GENERALIZED GRADIENT SMOOTHING TECHNIQUE AND THE SMOOTHED BILINEAR FORM FOR GALERKIN FORMULATION OF A WIDE CLASS OF COMPUTATIONAL METHODS , 2008 .

[2]  Long Chen.  FINITE ELEMENT METHOD , 2013 .

[3]  Lars-Erik Lindgren,et al.  FINITE ELEMENT MODELING AND SIMULATION OF WELDING. PART 3: EFFICIENCY AND INTEGRATION , 2001 .

[4]  Gui-Rong Liu,et al.  An Introduction to Meshfree Methods and Their Programming , 2005 .

[5]  Stéphane Bordas,et al.  Numerical integration over arbitrary polygonal domains based on Schwarz–Christoffel conformal mapping , 2009 .

[6]  T. Hughes,et al.  Efficient quadrature for NURBS-based isogeometric analysis , 2010 .

[7]  Shengchuan Wu,et al.  An edge-based smoothed point interpolation method (ES-PIM) for heat transfer analysis of rapid manufacturing system , 2010 .

[8]  Indra Vir Singh,et al.  MESHLESS EFG METHOD IN THREE-DIMENSIONAL HEAT TRANSFER PROBLEMS: A NUMERICAL COMPARISON, COST AND ERROR ANALYSIS , 2004 .

[9]  O. J. Marlowe,et al.  Numerical integration over simplexes and cones , 1956 .

[10]  T. Hughes,et al.  Isogeometric analysis : CAD, finite elements, NURBS, exact geometry and mesh refinement , 2005 .

[11]  Herbert Staufer,et al.  Laser hybrid welding in the automotive industry , 2007 .

[12]  Alberto Cardona,et al.  Finite element modeling of welding processes , 2011 .

[13]  Guirong Liu,et al.  Nonlinear Transient Heat Transfer Problems using the Meshfree ES-PIM , 2010 .

[14]  N. Sukumar,et al.  Archives of Computational Methods in Engineering Recent Advances in the Construction of Polygonal Finite Element Interpolants , 2022 .

[15]  I. Richardson,et al.  Microstructure and mechanical properties of AA7075(T6) hybrid laser/GMA welds , 2007 .

[16]  M. Holzinger,et al.  The finite element method in heat transfer analysis , 1997 .

[17]  N. Sukumar,et al.  Conforming polygonal finite elements , 2004 .

[18]  T. Rabczuk,et al.  A two-dimensional Isogeometric Boundary Element Method for elastostatic analysis , 2012 .

[19]  Xuhai Tang,et al.  A novel virtual node method for polygonal elements , 2009 .

[20]  Guirong Liu,et al.  Extended finite element method with edge-based strain smoothing (ESm-XFEM) for linear elastic crack growth , 2012 .

[21]  Stéphane Bordas,et al.  On the performance of strain smoothing for quadratic and enriched finite element approximations (XFEM/GFEM/PUFEM) , 2011 .

[22]  M. Khoshgoftaar,et al.  Finite element formulation and solution of nonlinear heat transfer , 1979 .

[23]  Satya N. Atluri,et al.  The meshless local Petrov-Galerkin method for the analysis of heat conduction due to a moving heat source, in welding , 2011 .

[24]  Wiesława Piekarska,et al.  Three-dimensional model for numerical analysis of thermal phenomena in laser–arc hybrid welding process , 2011 .

[25]  I. Babuska,et al.  The partition of unity finite element method: Basic theory and applications , 1996 .

[26]  Marc Duflot,et al.  Meshless methods: A review and computer implementation aspects , 2008, Math. Comput. Simul..

[27]  N. Sukumar,et al.  Extended finite element method on polygonal and quadtree meshes , 2008 .