Turbine Blade Platform Film Cooling With Fan-Shaped Holes Under Simulated Swirl Purge Flow and Slashface Leakage Conditions

[1]  Je-Chin Han.  Fundamental Gas Turbine Heat Transfer , 2013 .

[2]  Je-Chin Han,et al.  Turbine Blade Platform Film Cooling With Typical Stator-Rotor Purge Flow and Discrete-Hole Film Cooling , 2009 .

[3]  Terrence W. Simon,et al.  Heat Transfer Measurements in a First-Stage Nozzle Cascade Having Endwall Contouring: Misalignment and Leakage Studies , 2007 .

[4]  Je-Chin Han,et al.  Film Cooling Effectiveness Distributions on a Turbine Blade Cascade Platform With Stator-Rotor Purge and Discrete Film Hole Flows , 2008 .

[5]  Minking K. Chyu,et al.  Influence of Gap Leakage Downstream of the Injection Holes on Film Cooling Performance , 1998 .

[6]  Je-Chin Han,et al.  Influence of Coolant Density on Turbine Blade Film-Cooling Using Pressure Sensitive Paint Technique , 2012 .

[7]  Je-Chin Han,et al.  Effect of Upstream Wake With Vortex on Turbine Blade Platform Film Cooling With Simulated Stator-Rotor Purge Flow , 2009 .

[8]  Meinhard T. Schobeiri,et al.  Experimental Investigation of the Effect of Purge Flow on Film Cooling Effectiveness on a Rotating Turbine With Nonaxisymmetric End Wall Contouring , 2014 .

[9]  Je-Chin Han,et al.  Turbine Blade Platform Film Cooling With Simulated Swirl Purge Flow and Slashface Leakage Conditions , 2017 .

[10]  G. Barigozzi,et al.  Fan-Shaped Hole Effects on the Aero-Thermal Performance of a Film-Cooled Endwall , 2006 .

[11]  MINKING K. CHYU.  Heat Transfer near Turbine Nozzle Endwall , 2001, Annals of the New York Academy of Sciences.

[12]  H. P. Hodson,et al.  THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS , 2009 .

[13]  Effects of Orientation and Position of the Combustor-Turbine Interface on the Cooling of a Vane Endwall , 2012 .

[14]  R. Goldstein,et al.  Effect of swirled leakage flow on endwall film-cooling , 2014 .

[15]  L. Wright,et al.  Effect of Density Ratio on Flat Plate Film Cooling With Shaped Holes Using PSP , 2011 .

[16]  Srinath V. Ekkad,et al.  Gas Turbine Heat Transfer and Cooling Technology , 2012 .

[17]  Martin Nicklas,et al.  Film-Cooled Turbine Endwall in a Transonic Flow Field: Part II—Heat Transfer and Film-Cooling Effectiveness , 2001 .

[18]  Je-Chin Han,et al.  A REVIEW OF HOLE GEOMETRY AND COOLANT DENSITY EFFECT ON FILM COOLING , 2013 .

[19]  Je-Chin Han,et al.  Film Cooling With Forward and Backward Injection for Cylindrical and Fan-Shaped Holes Using PSP Measurement Technique , 2014 .

[20]  Karen A. Thole,et al.  Gas Turbine Film Cooling , 2006 .

[21]  Je-Chin Han,et al.  Full-Scale Turbine Vane Endwall Film-Cooling Effectiveness Distribution Using Pressure-Sensitive Paint Technique , 2016 .

[22]  Terrence W. Simon,et al.  Flow Measurements in a First Stage Nozzle Cascade Having Endwall Contouring, Leakage, and Assembly Features , 2013 .

[23]  Karen A. Thole,et al.  Heat Transfer and Film Cooling on a Contoured Blade Endwall With Platform Gap Leakage , 2017 .

[24]  Srinath V. Ekkad,et al.  Heat Transfer Performance of a Transonic Turbine Blade Passage in Presence of Leakage Flow Through Upstream Slot and Mateface Gap With Endwall Contouring , 2014 .

[25]  Karen A. Thole,et al.  Adiabatic Effectiveness Measurements and Predictions of Leakage Flows Along a Blade Endwall , 2005 .

[26]  Luzeng J. Zhang,et al.  Turbine Nozzle Endwall Film Cooling Study Using Pressure-Sensitive Paint , 2001 .

[27]  K. Thole,et al.  A Comparison of Cylindrical and Fan-Shaped Film-Cooling Holes on a Vane Endwall at Low and High Freestream Turbulence Levels , 2008 .

[28]  Terrence W. Simon,et al.  Turbine Endwall Aerodynamics and Heat Transfer , 2006 .

[29]  Karen A. Thole,et al.  Effect of Midpassage Gap, Endwall Misalignment, and Roughness on Endwall Film-Cooling , 2006 .

[30]  L. Langston,et al.  Secondary Flows in Axial Turbines—A Review , 2001, Annals of the New York Academy of Sciences.

[31]  Richard J Goldstein,et al.  Flow visualization in a linear turbine cascade of high performance turbine blades , 1995 .

[32]  Karen A. Thole,et al.  The Effects of Varying the Combustor-Turbine Gap , 2007 .

[33]  Je-Chin Han,et al.  Film-Cooling Effectiveness on a Rotating Blade Platform , 2006 .

[34]  Je-Chin Han,et al.  Influence of Coolant Density on Turbine Platform Film-Cooling With Stator–Rotor Purge Flow and Compound-Angle Holes , 2014 .

[35]  Ronald Scott Bunker,et al.  A review of shaped hole turbine film-cooling technology , 2005 .

[36]  Je-Chin Han,et al.  Upstream Vortex Effects on Turbine Blade Platform Film Cooling With Typical Purge Flow , 2012 .

[37]  L. S. Langston,et al.  Crossflows in a Turbine Cascade Passage , 1980 .

[38]  Je-Chin Han,et al.  Turbine Platform Cooling and Blade Suction Surface Phantom Cooling From Simulated Swirl Purge Flow , 2016 .

[39]  Karen A. Thole,et al.  Effects of Mid-Passage Gap, Endwall Misalignment and Roughness on Endwall Film-Cooling , 2005 .

[40]  Andrew F. Chen,et al.  Film Cooling for Cylindrical and Fan-Shaped Holes Using Pressure-Sensitive Paint Measurement Technique , 2015 .

[41]  G. Barigozzi,et al.  Influence of Purge Flow Injection Angle on the Aerothermal Performance of a Rotor Blade Cascade , 2014 .

[42]  Richard J Goldstein,et al.  Film Cooling Effect of Rotor-Stator Purge Flow on Endwall Heat/Mass Transfer , 2012 .

[43]  Howard P. Hodson,et al.  The Design of an Improved Endwall Film-Cooling Configuration , 1999 .

[44]  Terrence W. Simon,et al.  Measurements Over a Film-Cooled, Contoured Endwall With Various Coolant Injection Rates , 2001 .

[45]  Je-Chin Han,et al.  Film-Cooling Effectiveness on a Rotating Turbine Platform Using Pressure Sensitive Paint Technique , 2010 .

[46]  Karen A. Thole,et al.  Adiabatic Effectiveness Measurements of Endwall Film-Cooling for a First-Stage Vane , 2005 .

[47]  Akhilesh P. Rallabandi,et al.  TURBINE BLADE FILM COOLING USING PSP TECHNIQUE , 2010 .

[48]  E. R. G. Eckert,et al.  Film Cooling of the Gas Turbine Endwall by Discrete-Hole Injection , 1996 .

[49]  Je-Chin Han,et al.  Turbine Vane Endwall Film Cooling With Slashface Leakage and Discrete Hole Configuration , 2017 .

[50]  H. Hodson,et al.  Heat Transfer Committee Best Paper of 1995 Award: Distribution of Film-Cooling Effectiveness on a Turbine Endwall Measured Using the Ammonia and Diazo Technique , 1996 .

[51]  S. J. Kline,et al.  Describing Uncertainties in Single-Sample Experiments , 1953 .