An Inhomogeneous Structured Eversion Actuator

Soft actuators are free from any rigid, bulky, and hard components. This is greatly beneficial towards achieving compliant actuation and safe interactions in robots. Inspired by the eversion principle, we develop a novel soft actuator of the inhomogeneous cross-section that can linearly extend and achieve a large payload capability. The proposed soft actuator is a hollow sleeve, made from an airtight fabric, and features a top part of cylindrical shape and a bottom part of a conical shape. Unlike conventional eversion robots that extend unilaterally from the tip, in this proposed actuator the top cylindrical part and the bottom conical part are partially folded inwards so that the two tips are attached together. When pneumatic pressure is applied, the cylindrical part everts increasing in length while the conical section reduces in length folding inwards. The actuator achieves linear strains of 120% and can generate a force 84 N at a low pressure of 62 kPa. We develop a theoretical model to describe the force and strain characteristics of the actuator during eversion from conical shape to cylindrical shape. The results showcase a step towards large strain, high force actuators for safe and compliant robots.

[1]  CianchettiMatteo,et al.  Soft Robotics Technologies to Address Shortcomings in Today's Minimally Invasive Surgery: The STIFF-FLOP Approach , 2014 .

[2]  Paul E. Glick,et al.  Eversion and Retraction of a Soft Robot Towards the Exploration of Coral Reefs , 2019, 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft).

[3]  Pierre Lopez,et al.  The McKibben muscle and its use in actuating robot‐arms showing similarities with human arm behaviour , 1997 .

[4]  Kaspar Althoefer,et al.  Shrinkable, stiffness-controllable soft manipulator based on a bio-inspired antagonistic actuation principle , 2014, 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[5]  Allison M. Okamura,et al.  A soft robot that navigates its environment through growth , 2017, Science Robotics.

[6]  Kaspar Althoefer,et al.  Tendon and pressure actuation for a bio-inspired manipulator based on an antagonistic principle , 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA).

[7]  Kaspar Althoefer,et al.  Payload Capabilities and Operational Limits of Eversion Robots , 2019, TAROS.

[8]  K. Althoefer,et al.  EPAM: Eversive Pneumatic Artificial Muscle , 2019, 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft).

[9]  Kaspar Althoefer,et al.  Kinematic Control and Obstacle Avoidance for Soft Inflatable Manipulator , 2019, TAROS.

[10]  Allison M. Okamura,et al.  Design and implementation of a 300% strain soft artificial muscle , 2016, 2016 IEEE International Conference on Robotics and Automation (ICRA).

[11]  Daniela Rus,et al.  Pouch Motors: Printable/inflatable soft actuators for robotics , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).

[12]  Kaspar Althoefer,et al.  Plant-Inspired Soft Pneumatic Eversion Robot , 2018, International Conference on Biomedical Robotics and Biomechatronics.

[13]  Kaspar Althoefer,et al.  Design Analysis of a Fabric Based Lightweight Robotic Gripper , 2019, TAROS.