Harsh Environment Silicon Carbide Sensors for Health and Performance Monitoring of Aerospace Systems: A Review

The recent increase in transportation costs and the push for cleaner emissions demands advancements in aerospace technology. The current instrumentation used in aerospace applications is costly, and indirect measurement approaches are often employed due to the inability to locate sensors in harsh environments. Health monitoring technologies for the development of a distributed sensor network can be utilized to improve engine efficiencies and reduce emissions while maintaining safety. This paper reviews the recent advancements in silicon carbide (SiC) process technologies and demonstrations of SiC sensors and electronic circuits in hostile environments, which supports the use of SiC technology for health and performance monitoring of aerospace systems. Further development of this technology can ultimately improve the performance, reliability, and emissions of aerospace systems. However, challenges still remain for the realization of a distributed sensor network for harsh environment applications such as aerospace.

[1]  Carl-Mikael Zetterling,et al.  Process technology for silicon carbide devices , 2002 .

[2]  C.R.F. Azevedo,et al.  Aircraft landing gear failure: fracture of the outer cylinder lug , 2002 .

[3]  A. G. Molyar,et al.  Corrosion of Aircraft Structures Made of Aluminum Alloys , 2003 .

[4]  Christian Boller,et al.  Ways and options for aircraft structural health management , 2001 .

[5]  Kurtz,et al.  Characterization of n-Type p-Sic as a Piezoresistor , 2004 .

[6]  Babak Jamshidi.  Poly-crystalline silicon carbide passivated capacitive MEMS strain gauge for harsh environments , 2008 .

[7]  P. Sarro,et al.  Fabrication of a CMOS compatible pressure sensor for harsh environments , 2004 .

[8]  J. B. Casady,et al.  A hybrid 6H-SiC temperature sensor operational from 25/spl deg/C to 500/spl deg/C , 1996 .

[9]  Christian Boller,et al.  Health Monitoring of Aerospace Structures , 2003 .

[10]  M. Itoh,et al.  SiC thin-film thermistors , 1990 .

[11]  Joseph L. Rose,et al.  Ultrasonic Guided Wave NDT for Hidden Corrosion Detection , 1998 .

[12]  Li Chen,et al.  A SiC MEMS Resonant Strain Sensor for Harsh Environment Applications , 2007, IEEE Sensors Journal.

[13]  Characterization of Silicon Carbide Differential Amplifiers at High Temperature , 2007, 2007 IEEE Compound Semiconductor Integrated Circuits Symposium.

[14]  John C. Blanton,et al.  A Brief History of Aircraft Engine Development at General Electric , 2007 .

[15]  Darrin J. Young,et al.  Silicon-Carbide MESFET-Based 400 C MEMS Sensing and Data Telemetry , 2005 .

[16]  E. Tresso,et al.  Effect of defects on electrical properties of 4H-SiC Schottky diodes , 2008 .

[17]  C. Dharan,et al.  High-cycle fatigue of hybrid carbon nanotube/glass fiber/polymer composites , 2008 .

[18]  W.H. Ko,et al.  Silicon-carbide MESFET-based 400/spl deg/C MEMS sensing and data telemetry , 2005, IEEE Sensors Journal.

[19]  Thermally induced loads of fastened hybrid composite/aluminum structures , 2008 .

[20]  M. Mehregany,et al.  Silicon carbide as a new micromechanics material , 1992, Technical Digest IEEE Solid-State Sensor and Actuator Workshop.

[21]  H. Möller,et al.  A high temperature pressure sensor prepared by selective deposition of cubic silicon carbide on SOI substrates , 1999 .

[22]  Sia Nemat-Nasser,et al.  Integration of sensing networks into laminated composites , 2008, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[23]  Phillip B. Abel,et al.  Surface morphology of silicon carbide epitaxial films , 1995 .

[24]  Haim Abramovich,et al.  Fully reversed electromechanical fatigue behavior of composite laminate with embedded piezoelectric actuator/sensor , 2003 .

[25]  Yueping Guo,et al.  An Empirical Model for Landing Gear Noise Prediction , 2004 .

[26]  Muthu B. J. Wijesundara,et al.  Nitrogen doping of polycrystalline 3C-SiC films grown using 1,3-disilabutane in a conventional LPCVD reactor , 2003 .

[27]  N. G. Wright,et al.  SiC sensors: a review , 2007 .

[28]  B. Jamshidi,et al.  Silicon carbide coated MEMS strain sensor for harsh environment applications , 2007, 2007 IEEE 20th International Conference on Micro Electro Mechanical Systems (MEMS).

[29]  P. Neudeck,et al.  600 C Logic Gates Using Silicon Carbide JFET's , 2000 .

[30]  A. Fleischman,et al.  Characterization of polycrystalline silicon carbide films grown by atmospheric pressure chemical vapor deposition on polycrystalline silicon , 1998 .

[31]  Three-dimensional crystalline SiC nanowire flowers , 2004 .

[32]  B. Jamshidi,et al.  Corrosion Enhanced Capacitive Strain Gauge at 370°C , 2007, 2007 IEEE Sensors.

[33]  A. A. Ned,et al.  6H-SiC pressure sensor operation at 600/spl deg/C , 1998, 1998 Fourth International High Temperature Electronics Conference. HITEC (Cat. No.98EX145).

[34]  M. Mehregany,et al.  Silicon carbide for microelectromechanical systems , 2000 .

[35]  M. Mehregany,et al.  A Silicon Carbide Capacitive Pressure Sensor for High Temperature and Harsh Environment Applications , 2007, TRANSDUCERS 2007 - 2007 International Solid-State Sensors, Actuators and Microsystems Conference.

[36]  Pasqualina M. Sarro,et al.  Silicon carbide as a new MEMS technology , 2000 .

[37]  C. Carraro,et al.  Recent progress toward a manufacturable polycrystalline SiC surface micromachining technology , 2004, IEEE Sensors Journal.

[38]  A. Kurtz,et al.  Characterization of n-type beta -SiC as a piezoresistor , 1993 .

[39]  Anindya Ghoshal,et al.  STRUCTURAL HEALTH MONITORING OF AN AIRCRAFT JOINT , 2003 .

[40]  D. Polla,et al.  Experimental evaluation of MEMS strain sensors embedded in composites , 1999 .

[41]  Da-yung Wang,et al.  Oxidation behavior of diamond-like carbon films , 1999 .