Re-deployable sensors for modal estimates of bridges and detection of damage-induced changes in boundary conditions

Mode shapes are sensitive to the structural condition of bridges but a reasonable estimate of such changes require several accelerometers, which can be resource intensive. This paper obviates this ...

[1]  Norris Stubbs,et al.  Damage identification in beam-type structures: frequency-based method vs mode-shape-based method , 2003 .

[2]  Vikram Pakrashi,et al.  Damage detection and calibration from beam–moving oscillator interaction employing surface roughness , 2014 .

[3]  Kirill Mechitov,et al.  Development of Synchronized High-Sensitivity Wireless Accelerometer for Structural Health Monitoring , 2020, Sensors.

[4]  Paul Cahill,et al.  Mitigating the structural vibrations of wind turbines using tuned liquid column damper considering soil-structure interaction , 2018 .

[5]  Sung-Han Sim,et al.  Automated decentralized modal analysis using smart sensors , 2010 .

[6]  Maria Q. Feng,et al.  Testing and long-term monitoring of a curved concrete box girder bridge , 2011 .

[7]  Charles R. Farrar,et al.  A summary review of vibration-based damage identification methods , 1998 .

[8]  Vikram Pakrashi,et al.  Monitoring and repair of an impact damaged prestressed bridge , 2013 .

[9]  Patrick J. McGetrick,et al.  Experimental validation of a drive-by stiffness identification method for bridge monitoring , 2015 .

[10]  Eugene J. O'Brien,et al.  Theoretical investigation of the use of a moving vehicle to identify bridge dynamic parameters , 2009 .

[11]  Charles R. Farrar,et al.  A Bayesian approach based on a Markov-chain Monte Carlo method for damage detection under unknown sources of variability , 2014 .

[12]  Billie F. Spencer,et al.  Vision-Based Modal Survey of Civil Infrastructure Using Unmanned Aerial Vehicles , 2019, Journal of Structural Engineering.

[13]  Eugene J. O'Brien,et al.  The use of a dynamic truck–trailer drive-by system to monitor bridge damping , 2014 .

[14]  Sebastian Thöns,et al.  Progress of the COST Action TU1402 on the Quantification of the Value of Structural Health Monitoring , 2017 .

[15]  Luna Majumder,et al.  A time-domain approach for damage detection in beam structures using vibration data with a moving oscillator as an excitation source , 2003 .

[16]  Eugene J. O'Brien,et al.  Identification of bridge mode shapes using Short Time Frequency Domain Decomposition of the responses measured in a passing vehicle , 2014 .

[17]  Yeong-Bin Yang,et al.  Vehicle–bridge interaction dynamics and potential applications , 2005 .

[18]  Yeong-Bin Yang,et al.  IMPACT RESPONSE OF BRIDGES WITH ELASTIC BEARINGS TO MOVING LOADS , 2001 .

[19]  D. Inman,et al.  Continuous Model for the Transverse Vibration of Cracked Timoshenko Beams , 2002 .

[20]  Andrea Frangi,et al.  Optimal sensor placement methods and metrics – comparison and implementation on a timber frame structure , 2018 .

[21]  Z. Xiang,et al.  Damage detection by mode shape squares extracted from a passing vehicle , 2012 .

[22]  S. S. Law,et al.  DAMAGE LOCALIZATION BY DIRECTLY USING INCOMPLETE MODE SHAPES. TECHNICAL NOTE , 2000 .

[23]  Arturo González,et al.  A bridge-monitoring tool based on bridge and vehicle accelerations , 2015 .

[24]  Eugene J. O'Brien,et al.  Modelling the vehicle in vehicle—infrastructure dynamic interaction studies , 2010 .

[25]  Vikram Pakrashi,et al.  Visual inspection and bridge management , 2018 .

[26]  Rune Brincker,et al.  Modal identification of output-only systems using frequency domain decomposition , 2001 .

[27]  Eugene J. O'Brien,et al.  Drive‐by damage detection in bridges using the apparent profile , 2015 .

[28]  Mahir Ülker-Kaustell,et al.  Time-frequency analysis of railway bridge response in forced vibration , 2016 .

[29]  K. C. Chang,et al.  Constructing the mode shapes of a bridge from a passing vehicle: a theoretical study , 2014 .

[30]  David P. Thambiratnam,et al.  Damage detection in slab‐on‐girder bridges using vibration characteristics , 2013 .

[31]  Arturo González,et al.  Monitoring Bridge Dynamic Behaviour using an Instrumented Two Axle Vehicle , 2010 .

[32]  M. Fragiacomo,et al.  Dynamic identification and model updating of full-scale concrete box girders based on the experimental torsional response , 2020 .

[33]  Branko Glisic,et al.  Normalized Curvature Ratio for Damage Detection in Beam-Like Structures , 2017, Front. Built Environ..

[34]  Laurent Mevel,et al.  Uncertainty quantification for modal parameters from stochastic subspace identification on multi-setup measurements ☆ , 2013 .

[35]  Antonino Morassi,et al.  Dynamic Testing for Structural Identification of a Bridge , 2008 .

[36]  Maja Kreslin,et al.  Improved accuracy and robustness of bridge weigh-in-motion systems , 2018 .

[37]  Eugene J. O'Brien,et al.  On the use of a passing vehicle for the estimation of bridge mode shapes , 2017 .

[38]  Biswajit Basu,et al.  A Bridge-Vehicle Interaction Based Experimental Investigation of Damage Evolution , 2010 .