Multi-Approach Study of Nose Landing Gear Noise
暂无分享,去创建一个
Eleonora Neri | John Kennedy | Dick G. Simons | Gareth J. Bennett | Mirjam Snellen | Roberto Merino-Martínez | D. Simons | G. Bennett | J. Kennedy | M. Snellen | R. Merino-Martínez | E. Neri
[1] G.J.J. Ruijgrok. Elements of Aviation Acoustics , 2004 .
[2] Robert P. Dougherty,et al. Deconvolution of Sources in Aeroacoustic Images from Phased Microphone Arrays Using Linear Programming , 2013 .
[3] Pieter Sijtsma,et al. Integration methods for distributed sound sources , 2019, International Journal of Aeroacoustics.
[4] Eleonora Neri,et al. Aeroacoustic Source Separation on a Full Scale Nose Landing Gear Featuring Combinations of Low Noise Technologies , 2015 .
[5] Daniele Ragni,et al. Acoustic Emissions of Semi-Permeable Trailing Edge Serrations , 2018 .
[6] Hanno H. Heller,et al. Sound Radiation from Aircraft Wheel-WelVLanding-Gear Configurations , 1977 .
[7] Mirjam Snellen,et al. Assessment of aircraft noise sources variability using an acoustic camera , 2015 .
[8] Stephane Redonnet,et al. Landing Gear Noise Sources Identification through an Application of Array Methods to Experimental and Computational Data , 2016 .
[9] R. Merino Martinez,et al. Acoustic measurements of a DU96-W-180 airfoil with flow-misaligned serrations at a high Reynolds number in a closed-section wind tunnel , 2017 .
[10] Pieter Sijtsma,et al. High-resolution CLEAN-SC: Theory and experimental validation , 2017 .
[11] Dick G. Simons,et al. Sound quality metrics applied to aircraft components under operational conditions using a microphone array , 2019, 25th AIAA/CEAS Aeroacoustics Conference.
[12] Gareth J. Bennett,et al. Characterization of Low Noise Technologies Applied to a Full Scale Fuselage Mounted Nose Landing Gear , 2015 .
[13] Yueping Guo. A Semi-Empirical Model for Aircraft Landing Gear Noise Prediction , 2006 .
[14] W. E. Zorumski. Aircraft noise prediction program theoretical manual, part 1 , 1982 .
[15] Susann Boij,et al. Identification of noise sources on a realistic landing gear using numerical phased array methods applied to computational data , 2017 .
[16] Robert P. Dougherty,et al. Functional Beamforming for Aeroacoustic Source Distributions , 2014 .
[17] A.M.N. Malgoezar,et al. Noise breakdown of landing aircraft using a microphone array and an airframe noise model , 2017 .
[18] Eleonora Neri,et al. Bay cavity noise for full-scale nose landing gear: A comparison between experimental and numerical results , 2018 .
[19] Robert P. Dougherty. CROSS SPECTRAL MATRIX DIAGONAL OPTIMIZATION , 2016 .
[20] P. Spalart,et al. A hybrid RANS-LES approach with delayed-DES and wall-modelled LES capabilities , 2008 .
[21] Pieter Sijtsma,et al. Assessment of the accuracy of microphone array methods for aeroacoustic measurements , 2020, Journal of Sound and Vibration.
[22] Sebastien Guerin,et al. The Parametric Aircraft Noise Analysis Module - status overview and recent applications , 2011 .
[23] Jesper Madsen,et al. Effect of trailing edge serration-flow misalignment on airfoil noise emissions , 2017 .
[24] Dick G. Simons,et al. Functional Beamforming applied to full scale landing aircraft , 2016 .
[25] John Kennedy,et al. Investigation of the Noise Emission of a Regional Aircraft Main Landing Gear Bay , 2017 .
[26] D. L. Hawkings,et al. Sound generation by turbulence and surfaces in arbitrary motion , 1969, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.
[27] R. Merino Martinez. Microphone arrays for imaging of aerospace noise sources , 2018 .
[28] Gareth J Bennett,et al. Resonant mode characterisation of a cylindrical Helmholtz cavity excited by a shear layer. , 2017, The Journal of the Acoustical Society of America.
[29] Mirjam Snellen,et al. Variability of Sound Quality Metrics for Different Aircraft Types During Landing and Take-Off , 2019, 25th AIAA/CEAS Aeroacoustics Conference.
[30] M. Lighthill. On sound generated aerodynamically I. General theory , 1952, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.
[31] Dick G. Simons,et al. Determination of aircraft noise variability using an acoustic camera , 2016 .
[32] Gunilla Efraimsson,et al. Numerical investigation of a realistic nose landing gear , 2014 .
[33] Eleonora Neri,et al. Noise Characterization of a Full-Scale Nose Landing Gear , 2018, Journal of Aircraft.
[34] J. Rossiter. Wind tunnel experiments on the flow over rectangular cavities at subsonic and transonic speeds , 1964 .
[35] Eleonora Neri,et al. Comparing flyover noise measurements to full-scale nose landing gear wind tunnel experiments for regional aircraft , 2017 .
[36] Ryotaro Sakai,et al. Airframe noise measurements on JAXA Jet Flying Test Bed “Hisho” using a phased microphone array , 2017 .
[37] Eleonora Neri,et al. Analysis of nose landing gear noise comparing numerical computations, prediction models and flyover and wind-tunnel measurements , 2018, 2018 AIAA/CEAS Aeroacoustics Conference.
[38] Eleonora Neri. Characterisation and Reduction of Aircraft Landing Gear Noise , 2017 .
[39] Yueping Guo,et al. Airframe Noise Source Locations of a 777 Aircraft in Flight and Comparisons with Past Model-Scale Tests , 2003 .
[40] John Kennedy,et al. WENEMOR: Wind Tunnel Tests for the Evaluation of the Installation Effects of Noise Emissions of an Open Rotor Advanced Regional Aircraft , 2013 .
[41] Ulf Michel,et al. Directivity of landing-gear noise based on flyover measurements , 1999 .
[42] Damiano Casalino,et al. Comparison of computational and experimental microphone array results for an 18% scale aircraft model , 2017, International journal of aeroacoustics.
[43] Sebastien Guerin,et al. Tool Development for Low-Noise Aircraft Design , 2010 .
[44] Roberto Merino-Martínez,et al. Functional Beamforming Applied to Imaging of Flyover Noise on Landing Aircraft , 2016 .
[45] S. Elder,et al. Mechanisms of flow‐excited cavity tones at low Mach number , 1981 .
[46] Robert A. Golub,et al. Empirical Prediction of Aircraft Landing Gear Noise , 2005 .
[47] Pieter Sijtsma,et al. Phased Array Beamforming Applied to Wind Tunnel And Fly-Over Tests , 2010 .
[48] Martin R. Fink. Noise component method for airframe noise , 1977 .
[49] D. Simons,et al. Assessment of the sound quality of wind turbine noise reduction measures , 2019 .
[50] Karen Mulleners,et al. Characterizing a burst leading-edge vortex on a rotating flat plate wing , 2016 .
[51] N. Curle. The influence of solid boundaries upon aerodynamic sound , 1955, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.
[52] Lothar Bertsch,et al. Analysis of landing gear noise during approach , 2016 .
[53] Pieter Sijtsma,et al. Enhanced HR-CLEAN-SC for resolving multiple closely spaced sound sources , 2019, International Journal of Aeroacoustics.
[54] R. Amiet. Refraction of sound by a shear layer , 1977 .
[55] G. P. Howell,et al. De-Dopplerization and acoustic imaging of aircraft flyover noise measurements , 1986 .
[56] Mirjam Snellen,et al. Boundary layer characterization and acoustic measurements of flow-aligned trailing edge serrations , 2016 .
[57] Thomas Padois,et al. Fly-over source localization on civil aircraft , 2013 .
[58] Ling Li,et al. Design and performance of a small-scale aeroacoustic wind tunnel , 2017 .
[59] Pieter Sijtsma,et al. inverse integration method for distributed sound sources , 2018 .
[60] Eleonora Neri,et al. Noise reduction technologies for aircraft landing gear-A bibliographic review , 2020 .
[61] Reto Pieren,et al. Improving future low-noise aircraft technologies using experimental perception-based evaluation of synthetic flyovers. , 2019, The Science of the total environment.
[62] Tom Hynes,et al. Investigating landing gear noise using fly-over data: the case of a Boeing 747-400 , 2013 .
[63] F. Demetz,et al. Laminar and turbulent shear flow induced cavity resonances , 1977 .
[64] Jan Werner Delfs,et al. Noise Prediction within Conceptual Aircraft Design , 2012 .
[65] Thomas F. Brooks,et al. A Deconvolution Approach for the Mapping of Acoustic Sources (DAMAS) Determined from Phased Microphone Arrays , 2006 .
[66] Werner Dobrzynski,et al. Full-Scale Noise Testing on Airbus Landing Gears in the German-Dutch Wind Tunnel. , 1997 .
[67] D. M. Campbell,et al. Springer Handbook of Acoustics , 2015 .
[68] Q. Leclère,et al. A review of acoustic imaging methods using phased microphone arrays , 2019, CEAS Aeronautical Journal.
[69] John Kennedy,et al. Effect of noise reducing components on nose landing gear stability for a mid-size aircraft coupled with vortex shedding and freeplay , 2015 .
[70] Sebastien Guerin,et al. Airframe noise characteristics from flyover measurements and prediction , 2006 .
[71] Eleonora Neri,et al. The Reduction of Main Landing Gear Noise , 2016 .
[72] P. Welch. The use of fast Fourier transform for the estimation of power spectra: A method based on time averaging over short, modified periodograms , 1967 .
[73] Gareth J. Bennett,et al. The application of advanced beamforming techniques for the noise characterization of installed counter rotating open rotors , 2013 .
[74] Susann Boij,et al. Identifying equivalent sound sources from aeroacoustic simulations using a numerical phased array , 2017 .
[75] Mirjam Snellen,et al. Assessment of Noise Variability of Landing Aircraft Using Phased Microphone Array , 2017 .
[76] Malcolm J. Crocker,et al. Handbook of Acoustics , 1998 .
[77] Gunilla Efraimsson,et al. AERO-ACOUSTIC SOURCE ANALYSIS OF LANDING GEAR NOISE VIA DYNAMIC MODE DECOMPOSITION , 2014 .
[78] Werner Dobrzynski,et al. A European Study on Landing Gear Airframe Noise Sources , 2000 .
[79] Yueping Guo,et al. Experimental Study on Aircraft Landing Gear Noise , 2006 .
[80] Werner Dobrzynski,et al. Almost 40 Years of Airframe Noise Research: What Did We Achieve? , 2010 .