A transmission electron microscopy study on sputtered ZrB and ZrBN films

[1]  Christian Mitterer,et al.  Sputter deposition of ultrahard coatings within the system Ti-B-C-N , 1990 .

[2]  L. Hultman,et al.  Ar and excess N incorporation in epitaxial TiN films grown by reactive bias sputtering in mixed Ar/N2 and pure N2 discharges , 1989 .

[3]  Z. Hei,et al.  Cross-sectional characterization of TiN film HCD ion-plated on aluminium alloy substrate , 1989 .

[4]  J. Sundgren.  Summary Abstract: Structure and properties of nitride thin films grown by magnetron sputter deposition: Effects of ion irradiation during growth , 1988 .

[5]  J. Cuomo,et al.  Ion beam bombardment effects during films deposition , 1988 .

[6]  J. Greene,et al.  Microstructure and physical properties of polycrystalline metastable Ti0.5Al0.5N alloys grown by d.c. magnetron sputter deposition , 1987 .

[7]  L. Hultman,et al.  Low‐energy ion irradiation during film growth for reducing defect densities in epitaxial TiN(100) films deposited by reactive‐magnetron sputtering , 1987 .

[8]  K. Gray,et al.  Transverse transmission electron microscopy of sputtered NbN films , 1986 .

[9]  Xin Jiang,et al.  A transmission electron microscopy study on Ti-N films deposited by ion plating , 1986 .

[10]  S. Karlsson,et al.  Mechanisms of reactive sputtering of titanium nitride and titanium carbide III: Influence of substrate bias on composition and structure , 1983 .

[11]  R. Bunshah,et al.  Structure and properties of refractory compounds deposited by electron beam evaporation , 1978 .

[12]  John A. Thornton,et al.  Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatings , 1974 .