Real-Time Evaluation of the Dynamic Loading Capability of Indoor Distribution Transformers

With the integration of the renewable energy-based distributed small power plants, whose generated energies are uncertain, in addition to the increasing usage of the charging stations for electric vehicles, the determination of the dynamic loading of distribution transformers appears to be crucial. Therefore, the issues of the model-based online monitoring of distribution transformers may achieve acceptance, if a cost–benefit compromise is reached. In this paper, a new thermal model is proposed to calculate the top-oil temperature of indoor distribution transformers using calculated tank temperature which accounts for convection, radiation, conduction, and ventilation heat transfer phenomena. The model is validated using measurements during the in-service operation of two indoor distribution transformers. Moreover, a method for calculating the loading capability of indoor distribution transformers without sacrificing the transformer's life is presented which can be easily adjusted for other distribution transformers. Furthermore, the results of the hardware implementing the proposed model and method for a model-based online assessment of the loading capability during the in-service operation of an indoor distribution transformer are presented.

[1]  Miguel A. Ortega-Vazquez,et al.  Co-Optimization of Distribution Transformer Aging and Energy Arbitrage Using Electric Vehicles , 2017, IEEE Transactions on Smart Grid.

[2]  Julien Sandraz,et al.  Validated Transient Heat-Transfer Model for Underground Transformer in Rectangular Vault , 2013, IEEE Transactions on Power Delivery.

[3]  R. Goldschmidt,et al.  Temperature curves and the rating of electrical machinery , 1905 .

[4]  R. Grubb,et al.  A Transformer Thermal Duct Study of Various Insulating Fluids , 1981, IEEE Transactions on Power Apparatus and Systems.

[5]  L. Jauregui-Rivera,et al.  Acceptability of Four Transformer Top-Oil Thermal Models—Part I: Defining Metrics , 2008, IEEE Transactions on Power Delivery.

[6]  James L. Kirtley,et al.  An improved transformer top oil temperature model for use in an on-line monitoring and diagnostic system , 1997 .

[7]  S. Maksimovic,et al.  Non-stationary thermal model of indoor transformer stations , 2002 .

[8]  Stefan Tenbohlen,et al.  Malfunction Detection of the Cooling System in Air-Forced Power Transformers Using Online Thermal Monitoring , 2017, IEEE Transactions on Power Delivery.

[9]  Stefan Tenbohlen,et al.  Diagnostic Measurements for Power Transformers , 2016 .

[10]  Arthur M. Lockie,et al.  Thermal Performance of Distribution Transformers in Underground Vaults: II - Mathematical Model , 1968 .

[11]  P. S. Yeh.  Heat Transfer Problems of Distribution Transformers in Open Underground Vaults , 1971 .

[12]  W. H. Cooney.  Predetermination of self-cooled oil-immersed: Transformer temperatures before conditions are constant , 1925, Journal of the A.I.E.E..

[13]  G. Swift,et al.  A fundamental approach to transformer thermal modeling. II. Field verification , 2001 .

[14]  M. Lehtonen,et al.  Dynamic Thermal Modeling of MV/LV Prefabricated Substations , 2014, IEEE Transactions on Power Delivery.

[15]  W. Z. Black,et al.  Real-time thermal model for an oil-immersed, forced-air cooled transformer , 1990 .

[16]  G. Swift,et al.  A fundamental approach to transformer thermal modeling. I. Theory and equivalent circuit , 2001 .

[17]  R. Radosavljević,et al.  On the determination of characteristic temperatures in power oil transformers during transient states , 1993 .

[18]  Y. Çengel.  Heat Transfer: A Practical Approach , 1997 .

[19]  S. Bacha,et al.  Low-Voltage Transformer Loss-of-Life Assessments for a High Penetration of Plug-In Hybrid Electric Vehicles (PHEVs) , 2012, IEEE Transactions on Power Delivery.

[20]  M. Lehtonen,et al.  Dynamic thermal modeling of distribution transformers , 2005, IEEE Transactions on Power Delivery.

[21]  Q. H. Wu,et al.  Equivalent heat circuit based power transformer thermal model , 2002 .

[22]  P. Verho,et al.  Studies to Utilize Loading Guides and ANN for Oil-Immersed Distribution Transformer Condition Monitoring , 2007, IEEE Transactions on Power Delivery.

[23]  V. M. Montsinger,et al.  Temperature rise of stationary electrical: Apparatus as influenced by radiation, convection and altitude , 2022, Journal of the A.I.E.E..

[24]  D. Etheridge.  Natural Ventilation of Buildings Theory Measurement and Design , 2011 .