Fullerene-grafted block copolymers used as compatibilizer in P3HT/PCBM bulk heterojunctions: morphology and photovoltaic performances

The nanostructure of the active layer in polymer/fullerene bulk heterojunction solar cells is known to have a strong impact on the device performances. Controlling the polymer/fullerene blend morphology is therefore particularly important. In this work, a rod-coil block copolymer, based on a regioregular poly(3-hexylthiophene) electron-donor rod block and a C 60 -grafted coil block, is used as compatibilizer and its influences on the thin film morphology as well as the photovoltaic performances are investigated. It is shown that a small fraction of compatibilizer can enhance the device performances in an otherwise non-optimized process. At higher fractions or long annealing times however, the fullerene-grafted copolymer is found to behave as a nucleation center and triggers the formation of fullerene crystals.

[1]  M. Toney,et al.  Small-Molecule Thiophene-C60 Dyads As Compatibilizers in Inverted Polymer Solar Cells , 2010 .

[2]  Todd Emrick,et al.  Synthesis of C60-end capped P3HT and its application for high performance of P3HT/PCBM bulk heterojunction solar cells , 2010 .

[3]  V. Palermo,et al.  Solvent vapour annealing of organic thin films: controlling the self-assembly of functional systems across multiple length scales , 2010 .

[4]  R. Mezzenga,et al.  A New Supramolecular Route for Using Rod‐Coil Block Copolymers in Photovoltaic Applications , 2010, Advanced materials.

[5]  S. Darling.  Block copolymers for photovoltaics , 2009 .

[6]  Klaus Meerholz,et al.  Morphology Control in Solution‐Processed Bulk‐Heterojunction Solar Cell Mixtures , 2009 .

[7]  Jae Kwan Lee,et al.  Well-defined donor–acceptor rod–coil diblock copolymers based on P3HT containing C60: the morphology and role as a surfactant in bulk-heterojunction solar cells , 2009 .

[8]  G. Hadziioannou,et al.  Characterization of P3HT/PCBM bulk heterojunction photovoltaic devices using advanced secondary ion mass spectrometry techniques , 2009 .

[9]  J. Loos,et al.  Three-dimensional nanoscale organization of bulk heterojunction polymer solar cells. , 2009, Nano letters.

[10]  G. Hadziioannou,et al.  Efficiency enhancement of polymer photovoltaic devices using thieno-thiophene based copolymers as nucleating agents for polythiophene crystallization , 2008 .

[11]  G. Hadziioannou,et al.  Design of a Linear Poly(3‐hexylthiophene)/Fullerene‐Based Donor‐Acceptor Rod‐Coil Block Copolymer , 2008 .

[12]  Robin H. A. Ras,et al.  Control of self-assembly by charge-transfer complexation between C60 fullerene and electron donating units of block copolymers , 2006 .

[13]  Jean M. J. Fréchet,et al.  Amphiphilic Diblock Copolymer Compatibilizers and Their Effect on the Morphology and Performance of Polythiophene:Fullerene Solar Cells , 2006 .

[14]  David L Carroll,et al.  Meso-structure formation for enhanced organic photovoltaic cells. , 2005, Organic letters.

[15]  R. D. Mccullough,et al.  Facile Synthesis of End-Functionalized Regioregular Poly(3-alkylthiophene)s via Modified Grignard Metathesis Reaction , 2005 .

[16]  David L. Carroll,et al.  High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1- phenyl-(6,6)C61 blends , 2005 .

[17]  Jurjen Wildeman,et al.  Simultaneous enhancement of charge transport and exciton diffusion in poly(p-phenylene vinylene) derivatives , 2005 .

[18]  Vladimir Dyakonov,et al.  Influence of nanomorphology on the photovoltaic action of polymer–fullerene composites , 2004 .

[19]  R. Friend,et al.  The photovoltaic effect in a poly(p-phenylenevinylene)/perylene heterojunction , 1997 .

[20]  Yongsup Park,et al.  Dramatic photoluminescence quenching of phenylene vinylene oligomer thin films upon submonolayer Ca deposition , 1996 .

[21]  Stephen C. Moratti,et al.  EXCITON DIFFUSION AND DISSOCIATION IN A POLY(P-PHENYLENEVINYLENE)/C60 HETEROJUNCTION PHOTOVOLTAIC CELL , 1996 .

[22]  Zhenan Bao,et al.  Solvent additives and their effects on blend morphologies of bulk heterojunctions , 2011 .