An investigation of the corrosion inhibition of pure aluminum in neutral and acidic chloride solutions

[1]  F. D. Bogar,et al.  The Influence of Chloride Ion on the Pitting of Aluminum , 1972 .

[2]  J. Augustynski,et al.  Etude potentiostatique et spectroscopique de l'aluminium recouvert par une couche d'oxyde: effet de differents anions , 1975 .

[3]  F. Delnick,et al.  Behavior of Salicylaldoxime and 8‐Hydroxyquinoline at a Copper Electrode , 1975 .

[4]  C. K. Jackson,et al.  A study of the effects of inhibitive and aggressive ions on oxide-coated aluminium using secondary ion mass spectrometry , 1976 .

[5]  J. Augustynski,et al.  On the Composition of the Passivating Films Formed on Aluminum in Chromate Solutions , 1977 .

[6]  T. M. Salem,et al.  The use of soluble corrosion inhibitors for aluminium alloys , 1978 .

[7]  F. Tirbonod,et al.  Inhibition of the corrosion of aluminium alloys by organic dyes , 1978 .

[8]  K. Jüttner,et al.  AC-impedance measurements on aluminium barrier type oxide films , 1983 .

[9]  Z. Szklarska‐Śmiałowska,et al.  Pitting Corrosion of Metals , 1986 .

[10]  T. Beck.  Size distribution of etch pits in aluminum , 1988 .

[11]  K. Varga,et al.  Electrochemical study of the pitting corrosion of aluminium and its alloys—II. Study of the interaction of chloride ions with a passive film on aluminium and initiation of pitting corrosion , 1989 .

[12]  F. Mansfeld,et al.  A fitting procedure for impedance data of systems with very low corrosion rates , 1989 .

[13]  M. Khedr,et al.  Corrosion Behavior of Aluminum in the Presence of Accelerating Metal Cations and Inhibition , 1989 .

[14]  F. Mansfeld,et al.  Pitting and Passivation of Al Alloys and Al‐Based Metal Matrix Composites , 1990 .

[15]  C. Mayer,et al.  AC-Impedance measurements on aluminium in chloride containing solutions and below the pitting potential , 1990 .

[16]  C. Brett.  The application of electrochemical impedance techniques to aluminium corrosion in acidic chloride solution , 1990 .

[17]  J. Garrido,et al.  ELECTROCHEMICAL STUDY OF ALUMINIUM CORROSION IN ACID CHLORIDE SOLUTIONS , 1991 .

[18]  A. Davenport,et al.  XANES investigation of the role of cerium compounds as corrosion inhibitors for aluminum , 1991 .

[19]  J. Bessone,et al.  An EIS study of aluminium barrier-type oxide films formed in different media , 1992 .

[20]  S. Berrada,et al.  Comportement electrochimique des alliages d'aluminium 2024 ET 7075 dans un milieu salin , 1992 .

[21]  F. Mansfeld,et al.  The CeMo process for the development of a stainless aluminum , 1992 .

[22]  S. R. Taylor,et al.  Evaluation of Natural Oxides on Aluminum in Neutral Borate Electrolyte , 1992 .

[23]  O. J. Murphy,et al.  The oxidation state and coordination environment of chromium in a sealed anodic aluminum oxide film by x-ray absorption spectroscopy , 1992 .

[24]  Z. Szklarska‐Śmiałowska.  Insight into the pitting corrosion behavior of aluminum alloys , 1992 .

[25]  J. Bockris,et al.  On the mechanism of the passivity of aluminum and aluminum alloys , 1993 .

[26]  M. Keddam,et al.  An impedance investigation of thin oxide layers on pure alimunium and of their water content , 1993 .

[27]  M. Metikoš-huković,et al.  Impedance spectroscopic study of aluminium and Al-alloys in acid solution: inhibitory action of nitrogen containing compounds , 1994 .

[28]  C. Brett,et al.  Inhibition of aluminium corrosion in chloride media: an impedance study , 1994 .

[29]  E. Dwarakadasa,et al.  Studies on the influence of chloride ion and pH on the electrochemical behaviour of aluminium alloys 8090 and 2014 , 1994 .

[30]  C. Brett,et al.  The electrochemical behaviour and corrosion of aluminium in chloride media. The effect of inhibitor anions , 1994 .

[31]  S. Pyun,et al.  The effect of oxide chemistry on the passivity of aluminium surfaces , 1995 .