Discussion of “Characterization of Model Uncertainty for Cantilever Deflections in Undrained Clay” by D. M. Zhang, K. K. Phoon, H. W. Huang, and Q. F. Hu

[1]  Kok-Kwang Phoon,et al.  Characterization of Model Uncertainty for Cantilever Deflections in Undrained Clay , 2015 .

[2]  Malcolm D. Bolton,et al.  Energy Conservation as a Principle Underlying Mobilizable Strength Design for Deep Excavations , 2011 .

[3]  Mehmet Baris Darendeli,et al.  Development of a new family of normalized modulus reduction and material damping curves , 2001 .

[4]  A. S. Osman,et al.  Ground Movement Predictions for Braced Excavations in Undrained Clay , 2006 .

[5]  Malcolm D. Bolton,et al.  Ground movements due to deep excavations in Shanghai: Design charts , 2014 .

[6]  A. S. Osman,et al.  A new design method for retaining walls in clay , 2004 .

[7]  C. Hsein Juang,et al.  Normalized Shear Modulus and Material Damping Ratio Relationships , 2005 .

[8]  Malcolm D. Bolton,et al.  Stiffness of Clays and Silts: Modeling Considerations , 2014 .

[9]  P. J. Vardanega,et al.  Stiffness of clays and silts: Normalizing shear modulus and shear strain , 2013 .

[10]  Spg Madabhushi,et al.  Laboratory measurement of strength mobilisation in kaolin: link to stress history , 2012 .

[11]  Malcolm D. Bolton,et al.  Strength mobilization in clays and silts , 2011 .

[12]  Malcolm D. Bolton,et al.  Understanding ground deformation mechanisms for multi-propped excavation in soft clay , 2014 .

[13]  Malcolm D. Bolton,et al.  Corrigendum: Strength mobilization in clays and silts , 2012 .

[14]  K. Phoon,et al.  Characterization of Geotechnical Variability , 1999 .