Porous Coconut Shell Carbon Offering High Retention and Deep Lithiation of Sulfur for Lithium-Sulfur Batteries.

Retaining soluble polysulfides in the sulfur cathodes and allowing for deep redox are essential to develop high-performance lithium-sulfur batteries. The versatile textures and physicochemical characteristics of abundant biomass offer a great opportunity to prepare biochar materials that can enhance the performance of Li-S batteries in sustainable mode. Here, we exploit micro-/mesoporous coconut shell carbon (CSC) with high specific surface areas as a sulfur host for Li-S batteries. The sulfur-infiltrated CSC materials show superior discharge-charge capacity, cycling stability, and high rate capability. High discharge capacities of 1599 and 1500 mA h g-1 were achieved at current rates of 0.5 and 2.0 C, respectively. A high reversible capacity of 517 mA h g-1 was retained at 2.0 C even after 400 cycles. The results demonstrate a high retention and a deep lithiation of the CSC-confined sulfur. The success of this strategy provides insights into seeking high-performance biochar materials for Li-S batteries from abundant bioresources.

[1]  Yutao Li,et al.  Graphene Sandwiched by Sulfur-Confined Mesoporous Carbon Nanosheets: A Kinetically Stable Cathode for Li-S Batteries. , 2016, ACS applied materials & interfaces.

[2]  M. Walkowiak,et al.  Biomass-derived hierarchical carbon as sulfur cathode stabilizing agent for lithium-sulfur batteries , 2016 .

[3]  Sen Xin,et al.  Covalently Connected Carbon Nanostructures for Current Collectors in Both the Cathode and Anode of Li–S Batteries , 2016, Advanced materials.

[4]  Li-Jun Wan,et al.  Sulfur Encapsulated in Graphitic Carbon Nanocages for High‐Rate and Long‐Cycle Lithium–Sulfur Batteries , 2016, Advanced materials.

[5]  Hong‐Jie Peng,et al.  Porous carbon derived from rice husks as sustainable bioresources: insights into the role of micro-/mesoporous hierarchy in hosting active species for lithium–sulphur batteries , 2016 .

[6]  Sen Xin,et al.  Conductive Carbon Network inside a Sulfur-Impregnated Carbon Sponge: A Bioinspired High-Performance Cathode for Li-S Battery. , 2016, ACS applied materials & interfaces.

[7]  Byoungwoo Kang,et al.  Understanding abnormal potential behaviors at the 1st charge in Li2S cathode material for rechargeable Li-S batteries. , 2016, Physical chemistry chemical physics : PCCP.

[8]  Yutao Li,et al.  Built‐in Carbon Nanotube Network inside a Biomass‐Derived Hierarchically Porous Carbon to Enhance the Performance of the Sulfur Cathode in a Li‐S Battery , 2016 .

[9]  L. Giebeler,et al.  Enhanced polysulphide redox reaction using a RuO2 nanoparticle-decorated mesoporous carbon as functional separator coating for advanced lithium-sulphur batteries. , 2016, Chemical communications.

[10]  Jian Zhang,et al.  Biomass-derived nanostructured porous carbons for lithium-sulfur batteries , 2016, Science China Materials.

[11]  Ya‐Xia Yin,et al.  Wet Chemistry Synthesis of Multidimensional Nanocarbon-Sulfur Hybrid Materials with Ultrahigh Sulfur Loading for Lithium-Sulfur Batteries. , 2016, ACS applied materials & interfaces.

[12]  Jiehua Liu,et al.  Natural Integrated Carbon Architecture for Rechargeable Lithium–Sulfur Batteries , 2016 .

[13]  Songtao Lu,et al.  A Sheet-like Carbon Matrix Hosted Sulfur as Cathode for High-performance Lithium-Sulfur Batteries , 2016, Scientific Reports.

[14]  Mark Wild,et al.  Lithium sulfur batteries, a mechanistic review , 2015 .

[15]  Xingxing Gu,et al.  Microporous bamboo biochar for lithium-sulfur batteries , 2015, Nano Research.

[16]  H. Ardebili,et al.  High proton conductivity membrane with coconut shell activated carbon , 2015, Ionics.

[17]  Vladimir Kolosnitsyn,et al.  On the reasons for low sulphur utilization in the lithium-sulphur batteries , 2015 .

[18]  O. D. Nartey,et al.  Biochar Preparation, Characterization, and Adsorptive Capacity and Its Effect on Bioavailability of Contaminants: An Overview , 2014 .

[19]  Yu-Guo Guo,et al.  Core-shell meso/microporous carbon host for sulfur loading toward applications in lithium-sulfur batteries , 2014 .

[20]  Chunpeng Yang,et al.  Insight into the effect of boron doping on sulfur/carbon cathode in lithium-sulfur batteries. , 2014, ACS applied materials & interfaces.

[21]  Hong‐Jie Peng,et al.  Unstacked double-layer templated graphene for high-rate lithium–sulphur batteries , 2014, Nature Communications.

[22]  Donghai Wang,et al.  Nitrogen‐Doped Mesoporous Carbon Promoted Chemical Adsorption of Sulfur and Fabrication of High‐Areal‐Capacity Sulfur Cathode with Exceptional Cycling Stability for Lithium‐Sulfur Batteries , 2014 .

[23]  J. Gerbec,et al.  Sulfur-functionalized mesoporous carbons as sulfur hosts in Li-S batteries: increasing the affinity of polysulfide intermediates to enhance performance. , 2014, ACS applied materials & interfaces.

[24]  Jun Zhang,et al.  Biomass derived activated carbon with 3D connected architecture for rechargeable lithium - sulfur batteries , 2014 .

[25]  Li-Jun Wan,et al.  Lithium-sulfur batteries: electrochemistry, materials, and prospects. , 2013, Angewandte Chemie.

[26]  Li Li,et al.  Graphene-based three-dimensional hierarchical sandwich-type architecture for high-performance Li/S batteries. , 2013, Nano letters.

[27]  Z. Gu,et al.  Carbon materials from high ash biochar for supercapacitor and improvement of capacitance with HNO3 surface oxidation , 2013 .

[28]  Huichao Chen,et al.  High efficiency immobilization of sulfur on nitrogen-enriched mesoporous carbons for Li-S batteries. , 2013, ACS applied materials & interfaces.

[29]  M. Oschatz,et al.  A new route for the preparation of mesoporous carbon materials with high performance in lithium-sulphur battery cathodes. , 2013, Chemical communications.

[30]  Li-Jun Wan,et al.  Encapsulation of Sulfur in a Hollow Porous Carbon Substrate for Superior Li‐S Batteries with Long Lifespan , 2013 .

[31]  Min-Kyu Song,et al.  Lithium/sulfur batteries with high specific energy: old challenges and new opportunities. , 2013, Nanoscale.

[32]  Kai Xi,et al.  Carbon with hierarchical pores from carbonized metal-organic frameworks for lithium sulphur batteries. , 2013, Chemical communications.

[33]  Ya‐Xia Yin,et al.  Smaller sulfur molecules promise better lithium-sulfur batteries. , 2012, Journal of the American Chemical Society.

[34]  K. Pinkwart,et al.  Lithium–sulphur batteries – binder free carbon nanotubes electrode examined with various electrolytes , 2012 .

[35]  J. R. Rani,et al.  Epoxy to Carbonyl Group Conversion in Graphene Oxide Thin Films: Effect on Structural and Luminescent Characteristics , 2012 .

[36]  Jean-Marie Tarascon,et al.  Li-O2 and Li-S batteries with high energy storage. , 2011, Nature materials.

[37]  Chunsheng Wang,et al.  Sulfur-impregnated disordered carbon nanotubes cathode for lithium-sulfur batteries. , 2011, Nano letters.

[38]  Arumugam Manthiram,et al.  Materials Challenges and Opportunities of Lithium-ion Batteries for Electrical Energy Storage , 2011 .

[39]  L. Nazar,et al.  A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries. , 2009, Nature materials.

[40]  K. Gubbins,et al.  Adsorption of water in activated carbons: Effects of pore blocking and connectivity , 2002 .

[41]  I. Cabasso,et al.  The permselectivity of ion-exchange membranes for non-electrolyte liquid mixtures : I. Separation of alcohol/water mixtures with nafion hollow fibers , 1985 .