Transient modelling of rotating and stationary cylindrical heat pipes: An engineering model

Rotating wickless and stationary capillary cylindrical heat pipes are widely used heat transfer devices. Transient behavior of such heat pipes has been investigated numerically with computational fluid dynamics and lumped parameter models. In this paper, the advantages of both methods are combined into a novel engineering model that is low in computational cost but still accurate and rich in the details it provides. The model describes the interior dynamics of the heat pipe with a 2D representation of a cylindrical heat pipe. Liquid and vapor volumes are coarsely meshed in the axial direction. The cells are allowed to change in size in the radial direction during simulation. This allows for tracking the liquid/vapor interface without having to implement fine meshing. The model includes the equations for mass, momentum and energy and is applicable to both rotating and stationary heat pipes. The predictions of the model are validated with other experimental, numerical, and analytical works having an average deviation of less than 4%. The effects of various parameters on the system are explored. The presented model is suitable for the simulation of heat pipe systems in which both the level of detail and the computational cost are crucial factors.

[1]  Amir Faghri,et al.  Analysis of flat heat pipes with various heating and cooling configurations , 2011 .

[2]  Mauro Mameli,et al.  Lumped parameter model of sintered heat pipe: transient numerical analysis and validation , 2013 .

[3]  C. Ching,et al.  Heat transfer in the evaporator section of moderate-speed rotating heat pipes , 2008 .

[4]  C. Ching,et al.  Fluid flow and heat transfer model for high-speed rotating heat pipes , 2003 .

[5]  Modeling and Validating the Transient Behavior of Flat Miniature Heat Pipes Manufactured in Multilayer Printed Circuit Board Technology , 2011 .

[6]  M. Groll,et al.  Heat Pipes for Cooling of an Electric Motor , 1978 .

[7]  T. C. Daniels,et al.  Investigations of the factors affecting the performance of a rotating heat pipe , 1975 .

[8]  Mohamed S. El-Genk,et al.  A heat pipe transient analysis model , 1994 .

[9]  Jong-Wook Kim,et al.  Heat pipe cooling technology for desktop PC CPU , 2003 .

[10]  T. P. Cotter,et al.  Structures of Very High Thermal Conductance , 1964 .

[11]  Patrik Nemec,et al.  Mathematical model for heat transfer limitations of heat pipe , 2013, Math. Comput. Model..

[12]  S. Harmand,et al.  Effect of using nanofluids on the performance of rotating heat pipe , 2015 .

[13]  C. Schaeffer,et al.  Heat Pipe Integrated in Direct Bonded Copper (DBC) Technology for the Cooling of Power Electronics Packaging , 2006, 2005 IEEE 36th Power Electronics Specialists Conference.

[14]  R. Ponnappan,et al.  TEST RESULTS OF A HIGH SPEED ROTATING HEAT PIPE , 1997 .

[15]  Amir Faghri,et al.  Review and Advances in Heat Pipe Science and Technology , 2012 .

[16]  A. Solomon,et al.  Numerical analysis of a screen mesh wick heat pipe with Cu/water nanofluid , 2014 .

[17]  S. Chan,et al.  Theory of a rotating heat pipe , 1971 .

[18]  E. Næss,et al.  Analysis of a Vertical Flat Heat Pipe Using Potassium Working Fluid and a Wick of Compressed Nickel Foam , 2016 .

[19]  Souad Harmand,et al.  Computational modeling of heat transfer in rotating heat pipes using nanofluids: A numerical study using PSO , 2017 .

[20]  R. Turner.  The "constant temperature" heat pipe - A unique device for the thermal control of spacecraft components , 1969 .

[21]  Amir Faghri,et al.  A network thermodynamic analysis of the heat pipe , 1998 .

[22]  Amir Faghri,et al.  Heat transfer in micro region of a rotating miniature heat pipe , 1999 .

[23]  L. L. Vasiliev,et al.  Micro and miniature heat pipes – Electronic component coolers , 2008 .

[24]  David Reay,et al.  Heat pipes : theory, design and applications , 2014 .

[25]  Dieter Brüggemann,et al.  Numerical Analysis of Shell-and-Tube Type Latent Thermal Energy Storage Performance with Different Arrangements of Circular Fins , 2017 .

[26]  Qiang Li,et al.  Investigation on transient behaviors of flat plate heat pipes , 2004 .

[27]  Yimin Xuan,et al.  Numerical investigation on flow and thermal features of a rotating heat pipe , 2016 .

[28]  Yong Li,et al.  Investigation on the thermal performance of a battery thermal management system using heat pipe under different ambient temperatures , 2018 .

[29]  K. Vafai,et al.  Analysis of cylindrical heat pipes incorporating the effects of liquid–vapor coupling and non-Darcian transport—a closed form solution , 1999 .

[30]  C. Ching,et al.  Experimental investigation on the heat transfer characteristics of axial rotating heat pipes , 2004 .

[31]  B. Boersma,et al.  Experimental and numerical investigation of contact heat transfer between a rotating heat pipe and a steel strip , 2018, International Journal of Heat and Mass Transfer.

[32]  Lanchao Lin,et al.  High performance miniature heat pipe , 2002 .

[33]  A. Faghri,et al.  Two-Dimensional Rotating Heat Pipe Analysis , 1995 .

[34]  Tien-Chien Jen,et al.  Investigation of heat pipe cooling in drilling applications. Part I: preliminary numerical analysis and verification , 2002 .

[35]  Vincent Ayel,et al.  Modeling of heat and mass transfer in the liquid film of rotating heat pipes , 2012 .

[36]  L. J. Ballback,et al.  THE OPERATION OF A ROTATING, WICKLESS HEAT PIPE , 1969 .