Sheath Voltage Estimation for Inductively Coupled Plasma Etcher by Impedance Analysis

A thick quartz glass is etched using an inductively coupled plasma device under constant antenna power. Sheath voltage, which is the RF voltage from the plasma edge to the sample surface, is estimated by impedance analysis. Sheath resistance and sheath capacitance are determined from some experimental bias voltage, which is the RF voltage applied to the sample bed electrode. Once they are determined, the bias and sheath voltages for arbitrary thick samples and bias power can be calculated. The calculated bias voltages agree with the experimental ones within 5%. Etching rate is proportional to sheath voltage for various etching conditions. A quartz sample 5-mm-thick can be etched at the same etch rate as a thin quartz sample using a thick quartz sample bed with a hole where the quartz sample is placed.

[1]  Srinivas Tadigadapa,et al.  High-speed anisotropic etching of quartz using SF6/C4F8/Ar/O2 based chemistry in inductively coupled plasma reactive ion etching system , 2006, SPIE MOEMS-MEMS.

[2]  J. Moon,et al.  Sub-0.1 μm nitride hard mask open process without precuring the ArF photoresist , 2003 .

[3]  Mark A. Sobolewski,et al.  Measuring the Ion Current in Electrical Discharges using Radio-frequency Current and Voltage Measurements , 1998 .

[4]  Hisao Kikuta,et al.  Fabrication of Microcone Array for Antireflection Structured Surface Using Metal Dotted Pattern , 2001 .

[5]  Hisao Kikuta,et al.  Fabrication of 1∕4 wave plate by nanocasting lithography , 2005 .

[6]  Hisao Kikuta,et al.  Optical Elements with Subwavelength Structured Surfaces , 2003 .

[7]  Tatiana S. Perova,et al.  Determination of SF 6 reactive ion etching end point of the SiO 2 /Si system by plasma impedance monitoring , 2003 .

[8]  Benjamin Alexandrovich,et al.  Electrical characteristics of parallel-plate RF discharges in argon , 1991 .

[9]  Y. Morikawa,et al.  A novel deep etching technology for Si and quartz materials , 2007 .

[10]  Simple method for ion current measurement at RF biased electrode , 2006 .

[11]  Srinivas Tadigadapa,et al.  High speed anisotropic etching of Pyrex® for microsystems applications , 2006 .

[12]  Wei Chen,et al.  Application of magnetic neutral loop discharge plasma in deep silica etching , 2001 .

[13]  Seiji Samukawa,et al.  Highly selective and high rate SiO2 etching using argon-added C2F4/CF3I plasma , 2003 .